WikiDevi will be going offline 2019-10-31. For historical dumps of the database, see 'WikiDevi' @ the Internet Archive (MW XML, Files, Images).
Final dumps will be made available after the site goes offline.
There is no chance the data will not live on, in some form - even if it isn't 'WikiDevi' anymore. For example, see TechInfoDepot.

ZyXEL P-660HW-D1 v2

From WikiDevi
Jump to: navigation, search

ZyXEL P-660HW -D1 v2

FCC approval date: 19 October 2006
Country of manuf.: China

Type: wireless router, dsl modem

FCC ID: I88P660HWD1V2

Power: 12 VAC ~ 50 Hz, 1 A
Connector type: barrel

CPU1: Texas Instruments TNETD7200
FLA1: 2 MiB
2,097,152 B
16,384 Kib
2,048 KiB
16 Mib
0.00195 GiB
(Macronix MX29LV160BTC-75)
RAM1: 16 MiB
16,777,216 B
131,072 Kib
16,384 KiB
128 Mib
0.0156 GiB
(Eorex EM488M1644VTA-6F)

Expansion IFs: none specified
Serial: yes, 4-pin header

WI1 chip1: Texas Instruments TNETW1350A
WI1 chip2: Texas Instruments TNETW3422
WI1 chip3: Texas Instruments TNETW3427
WI1 802dot11 protocols: bg
WI1 antenna connector: none

ETH chip1: Texas Instruments TNETD7200
Switch: Infineon ADM6996I
LAN speed: 100M
LAN ports: 4

bg

Flags: block diagram, schematics

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1173 additional devices
of which 71 are ZyXEL devices
Default login user: blank
Default login password: 1234
blank:1234 credentials used by 47 additional devices
of which 45 are ZyXEL devices

802dot11 OUI: none specified

 CPU1 brandWI1 chip1 brandWI1 chip2 brand
ZyXEL P-660HW-61Texas InstrumentsTexas InstrumentsRadia
ZyXEL P-660HW-D1TITITI
ZyXEL P-660HW-D1 v2Texas InstrumentsTexas InstrumentsTexas Instruments
For a list of all currently documented Texas Instruments chipsets with specifications, see Texas Instruments.


"ZyXEL", "45-401-000619", and "Made in China" is silkscreened on the board

in the FCC photos.

There is an additional model sharing this name with FCC ID I88P660HWDXV2..

ZyXEL P-660HW-D1 (Annex A)/D3 (Annex B)/D7 (VER2) FCC schematics

An additional (unprivlidged) account appears to be accessible with password user.

Default settings are per the FCC manual.