See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

ZyXEL P-2601HN-F1

From WikiDevi
(Redirected from ZyXEL P-2601HNL-F1)
Jump to: navigation, search

ZyXEL P-2601HN -F1

EAN: 5707157037327 (UPC DB, On eBay)
Country of manuf.: China

Amazon image

ASIN
B00JMFX2WC (Flag of the United Kingdom.svg, On Amazon, On CCC)
multiple revisions of this device, use caution

Type: wireless router, dsl modem, analog phone gateway

Power: 12 VDC, 1.5 A
Connector type: barrel

CPU1: Lantiq PSB 50800 (333 MHz, 2 cores)
FLA1: 16 MiB
16,777,216 B
131,072 Kib
16,384 KiB
128 Mib
0.0156 GiB
(Macronix MX29GL128EHT2I-90G)
RAM1: 64 MiB
67,108,864 B
524,288 Kib
65,536 KiB
512 Mib
0.0625 GiB
(ProMOS V58C2512164SDI5)

Expansion IFs: none specified
Serial: yes, internal, 4-pin header, 3.3V TTL

WI1 chip1: Ralink RT3070L
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: soldered

ETH chip1: Lantiq PSB 50800
Switch: Realtek RTL8306G
LAN speed: 10/100
LAN ports: 4

bgn

Additional chips
FXS chips;Lantiq;PEF 41068;PEF 41068, F V1.1, XWAY SLIC110;1;

Stock bootloader: U-Boot

Flags: ADSL2+

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1119 additional devices
of which 64 are ZyXEL devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 157 additional devices
of which 42 are ZyXEL devices

802dot11 OUI: none specified

For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.


802.11n Wireless ADSL2+ with 4x FE ports Gateway

P-2601HN-F1: One RJ-11 DSL port
P-2601HN-F3: One RJ-45 DSL port