Vodafone DSL-EasyBox 803

From WikiDevi
Jump to: navigation, search

Vodafone DSL-EasyBox 803 A

Manuf/OEM/ODM Arcadyan ARV752DPW22 1-B-LF-IR

(Est.) release date: August 2010

Type: wireless router, dsl modem, ISDN modem

Power: 15 VDC, 1.66 A
Connector type: barrel

CPU1: Infineon XWAY™ DANUBE (PSB 50702 E V1.4) (333 MHz)
FLA1: 8 MiB 8,388,608 B
65,536 Kib
8,192 KiB
64 Mib
0.00781 GiB
(Macronix Model?)
RAM1: 64 MiB 67,108,864 B
524,288 Kib
65,536 KiB
512 Mib
0.0625 GiB
(PSC A3S12D40ETP-G6)

Expansion IFs: USB 2.0
USB ports: 3
Serial: yes, internal, 4-pin header, populated, (115200,8,N,1)

WI1 chip1: Ralink RT3062
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none

ETH chip1: Infineon XWAY™ DANUBE (PSB 50702 E V1.4)
Switch: Atheros AR8216
LAN speed: 10/100
LAN ports: 4

bgn

Additional chips
USB 2.0 Controller;VIA;VT6212L;VIA, VT6212L, 1015CD TAIWAN, 23B7032511(C)(M);1;
Dual 2A, 30V Step-down Regulator w/ Programmable Frequency (up to 1.4MHz);Semtech;SC2620;SC2629, 0951, VHR45259;
Ringing SLIC with Integrated DC/DC Converter;Lantiq;PEF 4268 T V1.2;Lantiq, PEF 4268 T, V1.2, VE032432NO2, H1034;2;
ISDN Controller IC;Cologne Chip;XHFC-2SU;XHFC, -2SU, ISDN, 1010;1;
ISDN NT;Infineon;PEF80902 / T-SMINTO;Infineon, PEF80902, T-SIMINTO, V1.1, 61028;1;
VoIP chip w/ SPI interface;Silicon Labs;Si3050;Si3050-FT, 1020EM, F0BA;1;
Line-side device;Silicon Labs;Si3011;Si3050-FS, 1019FFL01J;1;

Stock FW OS: SuperTask!

Flags: ADSL2+

Default SSID: EasyBox-XXXXXX
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 245 additional devices
of which 0 are Vodafone devices
Default login user: root
Default login password: 123456

802dot11 OUI: 88:25:2C (-, 2 W, 2010)
Ethernet OUI: 88:25:2C (-, 2 W, 2010)

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

"P/N: 141752D20002J REV: 01B" and a date code of 1032 (Aug. 2010) is silkscreened on the board of one production model 803 A.

It would appear to be using the SuperTask! RTOS.

Per the quick install guide, the default SSID is EasyBox XXXXXX. However, on an actual unit, the SSID pattern is EasyBox-XXXXXX (not the last three octets of the BSSID, upper case letters).

[edit] Additional external links

[edit] Wikis

[edit] Forums

[edit] Serial

[edit] Pinout

The pinout is noted on the OpenWrt Wiki entry and is echoed below..

(3.3) (TxD) (RxD) (GND)
1     2     3     4
                  JP1

[edit] Info derived from

[edit] bootloader output

=======================================================================
Wireless ADSL Gateway DANUBE Loader V1.04.00 build Mar 19 2010 10:00:29
                    Arcadyan Technology Corporation
=======================================================================
MXIC MX29LV640BB bottom boot 16-bit mode found

Copying boot params.....DONE


Press Space Bar 3 times to enter command mode ...123
Yes, Enter command mode ...


[DANUBE Boot]:

======================
 [#] Set Serial Number
 [2] Use Normal Firmware
 [3] Use ART-Testing Firmware
 [9] Taggle ART Firmware Enable/Disable
 [A] Set MAC Address
 [E] Erase Flash
 [G] Run Runtime Code
 [H] Set Options
 [P] Print Boot Params
 [U] Upload to Flash
 [V] Set Board Version
======================

[DANUBE Boot]:

[edit] Used PSU(s)

The power supply included with the device seems to have been a UMEC UP0251B-15PE.

UMEC UP0251B-15PE (more)
Input: 100-240 VAC ~ 50/60 Hz, 0.6 A
 Input connector: CEE 7/4
Style: small, horiz.  Manuf. in: China
Output: 15 VDC, 1.66 A
 Output connector: barrel (center +)   OD: ??  ID: ??  LEN: ??