upgraded MW to 1.30 - maybe things are slightly less broken
Ubiquiti Networks airRouter
The Ubiquiti Networks logo and "SIMPLE AP N" appears to be silkscreened on these boards.
- "11-00124-04" and "UBIQUITI NETWORKS (C) 2010" is also etched onto the board.
- There are U.FL connectors on the board, but they are not connected by default.
UBNT's FCC internal photos for this device are perma-confidential.
- This router seems to be supported by DD-WRT, but activation is required.
Teardowns / etc
The UART header would not seem to be populated on all units.
[3.3] ( ) U (RxD) ( ) A ( ) ( ) R ( ) ( ) T (TxD) ( ) (GND) ( ) JP2 ----> to screw <---- to board edge
'Stock' (or at least, w/ some version of AirOS) boot log
U-Boot 126.96.36.199-s445 (Sep 6 2010 - 14:46:33) Board: Ubiquiti Networks XM board (rev 1.1 e4a2) DRAM: 32 MB Flash: 8 MB Net: eth0, eth1 Hit any key to stop autoboot: 0 ## Booting image at 9f050000 ... Image Name: MIPS Ubiquiti Linux-2.6.15-5.2 Created: 2011-01-14 12:43:09 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 771914 Bytes = 753.8 kB Load Address: 80002000 Entry Point: 80002000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... Booting... ...mounts done ...filesystem init done ...base ok ...update ok ...symlinks ok ...httpd ok ...detect ok ...running /sbin/init Please press Enter to activate this console.
XM.v5.3# cat /proc/cpuinfo system type : Atheros AR7240 (Python) processor : 0 cpu model : MIPS 24K V7.4 BogoMIPS : 259.07 wait instruction : yes microsecond timers : yes tlb_entries : 16 extra interrupt vector : yes hardware watchpoint : yes ASEs implemented : mips16 VCED exceptions : not available VCEI exceptions : not available