See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Ubiquiti Networks airGateway

From WikiDevi
Jump to: navigation, search

Ubiquiti Networks airGateway

FCC approval date: 06 February 2013

Type: access point

Industry Canada ID: 6545A-AGW

Power: 12-24 VDC, ? A
Connector type: Ethernet (PoE)
Power over Ethernet (PoE) tag: non-standard (otherwise unspecified)

CPU1: Atheros AR9331
FLA1: 8 MiB
8,388,608 B
65,536 Kib
8,192 KiB
64 Mib
0.00781 GiB
(Winbond W25Q64FVZPIG;)
RAM1: 32 MiB
33,554,432 B
262,144 Kib
32,768 KiB
256 Mib
0.0313 GiB
(EtronTech EM6AA160TSB-5G)

Expansion IFs: none specified
Serial: yes, internal, 4-pin header, 3.3V TTL

WI1 chip1: Atheros AR9331
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Atheros AR9331
Switch: Atheros AR9331
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1


Flags: PoE injector

Default SSID: (2 addl. devices)
Default IP address:
the IP is used by 1164 additional devices
of which 15 are Ubiquiti Networks devices
Default login user: ubnt
Default login password: ubnt
ubnt:ubnt credentials used by 23 additional devices
of which 23 are Ubiquiti Networks devices

802dot11 OUI: DC:9F:DB (2 E, 2 W, 2012)
Ethernet OUI: DC:9F:DB (2 E, 2 W, 2012)

For a list of all currently documented Atheros chipsets with specifications, see Atheros.

On the Ubiquiti Networks forum

Slides from AWC Las Vegas regarding the device

This device has a male RJ45 connector (to be connected to an active PoE port), a LAN port, and an active PoE port (which is meant to be connected to an airMAX Gateway)].

There is no AirMax support for this device. (no extended freq range..)

Default settings are per the FCC quick start guide.

This device is presumed to use a DC:9F:DB (Ubiquiti Networks) per a MAC label on the board in the FCC photos.