See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Ubiquiti Networks NanoStation Loco M2

From WikiDevi
Jump to: navigation, search

Ubiquiti Networks NanoStation Loco M2

FCC approval date: 30 September 2011
UPC: 609728683597 (UPC DB, On eBay)

Amazon image

ASIN
B004EGI3CI (Flag of the United States.svg, On Amazon, On CCC)

Type: access point

FCC ID: SWX-M2L
Industry Canada ID: 6545A-M2L

Power: 24 VDC, 0.5 A
Connector type: Ethernet (PoE)
Power over Ethernet (PoE) tag: non-standard (otherwise unspecified)

CPU1: Atheros AR7240 (400 MHz)
FLA1: 8 MiB
8,388,608 B
65,536 Kib
8,192 KiB
64 Mib
0.00781 GiB
(Brand? Model?)
RAM1: 32 MiB
33,554,432 B
262,144 Kib
32,768 KiB
256 Mib
0.0313 GiB
(Brand? Model?)

Expansion IFs: none specified

WI1 chip1: Atheros AR9287
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL

ETH chip1: Atheros AR7240
LAN speed: 10/100
LAN ports: 1

bgn

Third party firmware supported: OpenWrt, Gargoyle, DD-WRT • (List)

Default SSID: ubnt
Default IP address: 192.168.1.20
the IP 192.168.1.20 is used by 7 additional devices
of which 5 are Ubiquiti Networks devices
Default login user: ubnt
Default login password: ubnt
ubnt:ubnt credentials used by 23 additional devices
of which 23 are Ubiquiti Networks devices

802dot11 OUI: none specified

For a list of all currently documented Atheros chipsets with specifications, see Atheros.


AR724x device, DD-WRT wiki says AR7240, WiFi chip is probably AR9287 (if not, AR9283)

Reg. third party firmware support[edit]

OpenWrt and Gargoyle (.. which is based on OpenWrt) firmware should work fine on these devices.

It is noted as supported by DD-WRT on the DD-WRT Wiki's Supported Devices table. Like other UBNT devices, activation seems to be required.

FCC test results[edit]

  • Radiated power (with antenna): 115 dBuV/m peak (802.11b CH1,CH11) (this is indeed a high gain directional antenna)
  • Output power (before antenna): 22 dBm peak (802.11b CH6) (158.48mW) (unit has >10dB output power flatness from CH1 to CH11 - shit RF PCB design/calibration)

Additional external links[edit]

Wikis[edit]