See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken
Tenda AC6 V2
Tenda AC6 V2
FCC approval date: 18 December 2017
Country of manuf.: China
Type: wireless router
FCC ID: V7TAC6-V2
Power: 9 VDC, 1 A
Connector type: barrel
CPU1: Realtek RTL8197FN (1 GHz)
FLA1: ? MiB (Brand? Model?)
RAM1: ? MiB (Brand? Model?)
Expansion IFs: none specified
WI1 chip1: Realtek RTL8197FN
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Realtek RTL8812BR
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 2x2:2
WI2 antenna connector: none
ETH chip1: Realtek RTL8197FN
Switch: Realtek RTL8197FN
LAN speed: 10/100
LAN ports: 3
WAN speed: 10/100
WAN ports: 1
abgn+ac
Flags: Wave2, MU-MIMO
Default SSID: Tenda_XXXXXX (18 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 664 additional devices
of which 43 are Tenda devices
802dot11 OUI: none specified
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
Tenda AC6 | Broadcom | Broadcom | |
Tenda AC6 V2 | Realtek | Realtek |
- Regarding third party firmware support, Realtek SoC support in OpenWrt
+ (success) RTL8196C port status. on the OpenWrt Forum
and the Realtek thread on the DD-WRT Forum may be of interest.
AC1200 Smart Dual-Band WiFi Router
"10032561 V2.1" is silkscreened on the board in the FCC photos.
The two outer antennas attached to the sides are for 2.4GHz while the inner two antennas attached to the back are for 5GHz
- Web GUI: http://tendawifi.com