See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken


From WikiDevi
Jump to: navigation, search

TRENDnet TEW-732BR V1.0R

Manuf/OEM/ODM Cameo

FCC approval date: 27 February 2013
UPC: 710931130089 (UPC DB, On eBay)
Country of manuf.: China

Amazon image

B00E37JFH0 (Flag of the United States.svg, On Amazon, On CCC)

Type: wireless router


Power: 5 VDC, 1 A
Connector type: barrel

CPU1: Atheros AR1321 (535 MHz)
FLA1: 8 MiB
8,388,608 B
65,536 Kib
8,192 KiB
64 Mib
0.00781 GiB
(GigaDevice 25Q64BSIG)
RAM1: 64 MiB
67,108,864 B
524,288 Kib
65,536 KiB
512 Mib
0.0625 GiB
(Nanya NT5TU32M16DG-AC)

Expansion IFs: none specified
JTAG: 14-pin header, unpopulated
Serial: 4-pin header

WI1 chip1: Atheros AR1321
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL

ETH chip1: Atheros AR1321
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1


Third party firmware supported: OpenWrt

Default SSID: TRENDnet732-XXXX
Default IP address:
the IP is used by 102 additional devices
of which 45 are TRENDnet devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1200 additional devices
of which 48 are TRENDnet devices

802dot11 OUI: D8:EB:97 (9 E, 8 W, 2013)
Ethernet OUI: D8:EB:97 (9 E, 8 W, 2013)

For a list of all currently documented Atheros chipsets with specifications, see Atheros.

N300 Wireless Router

This router sits upright like the ZyXEL NBG5715.

"Rev:A0-2" and "Made In China" is silkscreened on the board in the FCC photos.

The WiSoC used is an AR1321-AL1A.

Default settings are per the FCC manual. The XXXX in the default SSID pattern appears to be lower-case hex digits.

The FCC label, however, specifies the default SSID pattern as TRENDnet732XXXX.

(The board contain a 4-pin UART (serial) output, as well as a 14-pin output (possibly for JTAG?).
Headers are unpopulated, need to be soldered. Board also has silkscreen and holes for one USB)