See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

TP-LINK TL-WR702N v1.2

From WikiDevi
Jump to: navigation, search

TP-LINK TL-WR702N v1.2

FCC approval date: 07 June 2012
(Est.) release date: 29 March 2012
UPC: 845973051785 (UPC DB, On eBay)
Country of manuf.: China

Amazon image

ASIN
B007PTCFFW (Flag of the United States.svg, On Amazon, On CCCmultiple uses)
multiple revisions of this device, use caution

Type: access point

FCC ID: TE7WR702N

Power: 5 VDC, 1 A
Connector type: USB Female Micro-B

CPU1: Atheros AR9331
FLA1: 2 MiB
2,097,152 B
16,384 Kib
2,048 KiB
16 Mib
0.00195 GiB
(cFeon QH16-104HIP)
RAM1: 16 MiB
16,777,216 B
131,072 Kib
16,384 KiB
128 Mib
0.0156 GiB
(Zentel A3S28D40FTP-G5)

Expansion IFs: none specified

WI1 chip1: Atheros AR9331
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Atheros AR9331
LAN speed: 10/100
LAN ports: 1

bgn

Stock FW OS: VxWorks

Default SSID: TP-LINK_XXXXXX (30 addl. devices)
Default IP address: 192.168.0.254
the IP 192.168.0.254 is used by 37 additional devices
of which 17 are TP-LINK devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1104 additional devices
of which 224 are TP-LINK devices

802dot11 OUI: 64:70:02 (8 E, 8 W, 2012), F8:D1:11 (6 E, 6 W, 2011)
Ethernet OUI: 64:70:02 (8 E, 8 W, 2012), F8:D1:11 (6 E, 6 W, 2011)

For a list of all currently documented Atheros chipsets with specifications, see Atheros.


Product page

"2050500200" and "Rev:1.0" is silkscreened on the board of a few production model units.. as well as the FCC EUT.

The same text is found on the Proware PW-RN401M EUT in its FCC filing.

Additional external links[edit]

newer revision units may have only 8 MB of RAM

Images[edit]

Boot log[edit]

This sequence will be needed to initiate PLL and RAM:

boot log
reboot

Reset_1


	 ________  ________             __      __  ____   _  __   ___
	|________||   ___  |           |  |    |  ||    \ | ||  | /  /
	   |  |   |  |___| |   __ __   |  |    |  ||     \| ||  |/  /
	   |  |   |   _____|  |__ __|  |  |___ |  || |\     ||      \
	   |__|   |__|                 |______||__||_| \____||__|\___\


                            Software Platform for MIPS
Creation date: Aug 24 2011, 18:58:10 (chenyunchuan@tp-link.net)
Copyright(C) 2001-2010 by TP-LINK TECHNOLOGIES CO., LTD.
CPU: AR9330: AP121 Board
CPU freq: 400 MHZ
SDRAM size: 8 MB
ipaddr:192.168.1.1
serverip:192.168.1.100
file:vxWorks.img


Attaching interface lo0... done
Rx clbufs 768 each of size 1756 
eth_rx_netpool_init: allocated, pDmaBuf=0x80637910, buffend = 80782514
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth_rx_netpool_init: done already!
Attached IPv4 interface to mirror unit 0
Press Ctrl+C to stop auto-boot...
 1 0
auto-booting...
Uncompressing...done
Starting at 0x80001000...

Attaching interface lo0... done
Rx clbufs 768 each of size 1756 
eth_rx_netpool_init: allocated, pDmaBuf=0x80e20960, buffend = 80f6b564
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth_rx_netpool_init: done already!
Attached IPv4 interface to mirror unit 0
usrAppInitEx: 137: GPIO_OE = c00081d
usrAppInitEx: 138: CP0 CONFIG = 80208483
usrAppInitEx: 139: CP0 CONFIG1 = 9ee3519e

-->starting wireless...
APCFG task id 80c5e450
sysWlanInit ...
Create WLAN event task tWLANEventTask
Create mem partion 0x80c3fc20 for size 73728
Boostrap clock 25MHz
ar9300RadioAttach: Need analog access recipe!!
Restoring Cal data from Flash
ant_div_control1 = 0x9
ath_get_caps[4303] rx chainmask mismatch actual 1 sc_chainmak 0
ath_get_caps[4278] tx chainmask mismatch actual 1 sc_chainmak 0
Create OS_MESGQ Successfully at 0x80c14c60
osifp->queue_head = 0x80c14f60
ag7240MemInit: allocated, dmabuf=0x80b4e2c0, buffend = 80c071c4
Entering Task Loop
Entering WLAN event Task Loop
LAN Port Interface type is 0x4c04
-->wps is shutdown!
ERROR:wireless OR ACL disable
sending message 80b2f540,24
TDDP: Now listening client request. 
tddp is running.
wmosSemMCreate() pMud->mudDataSem:-2135960768



                            Software Platform for MIPS
  Copyright(C) 2001-2010 by TP-LINK TECHNOLOGIES CO., LTD.
  Creation date: Mar 14 2013, 11:00:05
# Starting WLAN !!!! 
AP_STARTMODE=standard
AP_ENABLE=1
ATH_COUNTRYCODE=840
wlan_vap_create : enter. devhandle=0x803c6430, opmode=IEEE80211_M_HOSTAP, flags=0x1
wlan_vap_create : exit. devhandle=0x803c6430, opmode=IEEE80211_M_HOSTAP, flags=0x1.
osif_ioctl_create_vap: vap 0x80ffe960 vap->iv_unit 0
ieee80211_end_load: load done
ath0 end flag = 0x00028802
default 
default 
default 
IEE80211-FREQ IOCTL vap 0x80ffe960 0,0,0
AP_CHMODE=11NGHT40PLUS

WLAN IOCTL AP_CHMODE=11NGHT40PLUS=11NGHT20=11NGHT40PLUS=1003
IEE80211-MODE IOCTL 1,11NGHT40PLUS,13
set mode 11,-2130709148,6
set mode retv 0

WLAN IOCTL AP_PRIMARY_CH=auto=1=auto=1002
IEE80211-FREQ IOCTL vap 0x80ffe960 0,0,11

WLAN IOCTL PUREG=0=0=0=1004
IEEE80211-SETPURGE IOCTL 0

WLAN IOCTL AP_HIDE_SSID=0=0=0=1005
IEEE80211-SETHIDESSIDIOCTL 0

WLAN IOCTL AP_ISOLATION=0=0=0=1034
IEE80211-setparam-nobridge 0

WLAN IOCTL AP_TX11NRATE==0=0=1041
set auto rate

WLAN IOCTL AP_11G_PROTECTION==0=0=1042

WLAN IOCTL AP_BEACON_INTERVAL=100=100=100=1043

WLAN IOCTL AP_FRAGMENT_THRESHOLD=2346=2346=2346=1044

WLAN IOCTL AP_RTS_THRESHOLD=2346=2347=2346=1046

WLAN IOCTL AP_DTIM_PERIOD=1=1=1=1045

WLAN IOCTL AP_WMM_ENABLE=1=1=1=1051

WLAN IOCTL AP_WMM_NOACK==0=0=1052
IOCTL set wmm noack 0

WLAN IOCTL AP_CYPHER_2==CCMP=CCMP=1000
Get EIOCGADDR

WLAN IOCTL AP_NO_EDGE_CH==0=0=1056

WLAN IOCTL AP_MCASTRATE==0=0=1018

WLAN IOCTL AP_MACFILTER_MODE==0=0=1038

WLAN IOCTL AP_MACFILTER_LIST====1000
Get EIOCGADDR

WLAN IOCTL AP_SHORT_GI=1=1=1=1055

WLAN IOCTL AP_DISABLECOEXT=1=0=1=1075

WLAN IOCTL AP_SSID=TP-LINK_3C11AA=Hornet_test_xxxxxxx=TP-LINK_3C11AA=1001
IEE80211-ESSID IOCTL 1,TP-LINK_3C11AA,15
AP_CHMODE=11NGHT40PLUS
AP_CWMMODE=1
IEE80211-CWMMODE IOCTL 1
AP_AMPDU=0
AP_PURE_N=0
AP_TX_CHAINMASK=1
AP_RX_CHAINMASK=1
AP_SECMODE=WPAWPA2
WPS_ENABLE=0
Security Mode: WPAWPA2
AP_MACFILTER_MODE=0
ieee80211_open
FIXME: ar9300GetMinCCAPwr
FIXME: ar9300GetMinCCAPwr
FIXME: ar9300GetMinCCAPwr
FIXME: ar9300GetMinCCAPwr
FIXME: ar9300GetMinCCAPwr
FIXME: ar9300GetMinCCAPwr
FIXME: ar9300GetMinCCAPwr
FIXME: ar9300GetMinCCAPwr
FIXME: ar9300GetMinCCAPwr
FIXME: ar9300GetMinCCAPwr
ar9300LoadNF: *** TIMEOUT while waiting for nf to load: AR_PHY_AGC_CONTROL=0x1d0d5a ***

WLAN IOCTL AP_BASICRATES====1039

WLAN IOCTL AP_DEBUG=0==0=1062

WLAN IOCTL AP_TX_POWER====1073
Starting Hostapd
AP_SSID=TP-LINK_3C11AA
AP_HOSTAPD_DEBUG=
AP_IPADDR=192.168.1.2
AP_SECMODE=WPAWPA2
WPS BSS init
WPS_ENABLE=0
AP_SECMODE=WPAWPA2
WPAWPA2 BSS init
WPA BSS init
PSK_KEY=B33C11AA
AP_CYPHER=CCMP TKIP
AP_WPA_GROUP_REKEY=3600
starting hostapd ... 
Hostapd task Created 80acb2a0
Task details [80acb2a0,,64,80c5e1e8]
Adding ath0 in bridge ...
default 
Set EIOCGMIB2
default 
Entering Hostapd Main 
default 
Set EIOCGMIB2
attached backend socket .
Attached backend socket for eth0
Attached backend socket for eth1
Attached backend socket for mirror 0
@@@@ kris-hostapd vapid=0 @@@@@ wiface=ath0 @@@@
**** [2,1,0,1192.168.1.2,]****
Just before eloop_run()
 *** setup interface1 started ****
 Eapol sockfd=24 
Get EIOCGADDR
MAC address 64,66,ffffffb3,3c,11,ffffffaa
link _ubind0,0,0,0,0,0
IEE80211-IWMODE IOCTL  3
IEE80211-setparam-privacy 0
1136073607.516667: Defaulted uuid based on mac addr 64:66:b3:3c:11:aa
ieee80211_ioctl_setappiebuf
ieee80211_ioctl_setappiebuf
ieee80211_ioctl_setappiebuf
Madwifi init completed
 *** setup interface1 completed ****
 *** setup interface2 started ****
IOCTL setmlme
[ieee80211_ioctl_setmlme:1907] data=0x80acadc0,data->pointer=0x80acae10, data->length=42
[ieee80211_ioctl_setmlme:1913] mlme->im_op=3
IEE80211-setparam-privacy 0
ieee80211_ioctl_delkey : idk_keyix=0
ieee80211_ioctl_delkey : idk_keyix=1
ieee80211_ioctl_delkey : idk_keyix=2
ieee80211_ioctl_delkey : idk_keyix=3
Using interface ath0 with hwaddr 64:66:b3:3c:11:aa and ssid 'TP-LINK_3C11AA'
IEE80211-ESSID IOCTL 1,TP-LINK_3C11AA,15
osif_vap_init :vap up 
IEE80211-setparam-mcastcipher 1
Warning: wlan_set_mcast_cipher failed. cache the mcast cipher
IEE80211-setparam-unicipher 10
Warning: wlan_set_ucast_cipher failed. cache the ucast cipher
IEE80211-setparam-keymgmtalgs 2
ieee80211_rsncaps
IEE80211-setparam-wpa 3
set IEEE80211_IOC_WPA to WPA and RSN
[ieee80211_ioctl_setparam_wpa:1741]
IEE80211-setparam-authmode 5
osif_vap_init :vap up 
osif_vap_init 0
ieee80211_ioctl_setkey
 

ieee80211_ioctl_setkey: ******** SETKEY : error: 0 , key_type=1, macaddr=ff:ff:ff:ff:ff:ff, key_len=16

IEE80211-setparam-privacy 1
hostapd_ctrl_iface_init
 ****setup interface2 completed****
 ****setup interface finalized ****