For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Manuf/OEM/ODM AMIT CDW68AAM-U01
FCC approval date: 07 February 2012
Power: 12 VDC, 1.5 A
Connector type: barrel
RT3883FLA1: 16 MiB
Model?)RAM1: 64 MiB
Expansion IFs: USB 2.0
USB ports: 2
Serial: yes, (57600,8,N,1)
WI1 chip1: Ralink RT3883
WI1 802dot11 protocols: an
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Ralink RT5392
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL, RP-SMA
ETH chip1: Ralink RT3883
Switch: Atheros AR8327
LAN speed: 10/100/1000
LAN ports: 4
WAN speed: 10/100/1000
WAN ports: 1
750Mbps Wireless-N Beam-forming IPv6 Gigabit Router
"11340Y20IU00003B1" and "2011/08/09" is silkscreened on the board in the FCC photos.
On openrouter.info, post by obsy
- 16MB Flash, 64MB RAM
- Serial pinout: (Pin 1) <-- VCC, RX, TX, GND
This device appears to be a AMIT CDW68AAM-U01. The FCC ID of the parent OEM product (PBLCDW68AAMU01) has been assigned to this entry.
The default SSIDs for this device appear to be airlive2.4 (or perhaps airlive2.4g) and airlive5g. There are two entries for the 2.4GHz SSID on WiGLE.. and one for the 5GHz SSID. 00:4F:67 is presumed to be the OUI used.