critical WPA2 vulnerabilities afoot, see KRACK attacks (discussion @ /r/KRaCK, HN, /r/netsec, Slashdot)

Open-Mesh OM2P-LC

From WikiDevi
Jump to: navigation, search

Open-Mesh OM2P -LC

Manuf/OEM/ODM Senao

FCC approval date: 19 September 2012
Country of manuf.: Taiwan

Type: mesh node, access point

FCC ID: WT8OM2PLC
Industry Canada ID: 10103A-OM2PLC

Power: 12 VDC, 1 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9.5 mm (LEN)
Power over Ethernet (PoE) tag: non-standard (otherwise unspecified)

CPU1: Atheros AR9331 (400 MHz)
FLA1: 16 MiB
16,777,216 B
131,072 Kib
16,384 KiB
128 Mib
0.0156 GiB
(Spansion FL128PIFL)
RAM1: 64 MiB
67,108,864 B
524,288 Kib
65,536 KiB
512 Mib
0.0625 GiB
(Nanya NT5DS32M16DS-5T)

Expansion IFs: none specified

WI1 chip1: Atheros AR9331
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: U.FL

ETH chip1: Atheros AR9331
Switch: Atheros AR9331
LAN speed: 10/100
LAN ports: 1
WAN speed: 10/100
WAN ports: 1

bgn

Third party firmware supported: OpenWrt

Default SSID: open-mesh (5 addl. devices)
Default login user: root
Default login password: 0p3nm35h
root:0p3nm35h credentials used by 5 additional devices
of which 5 are Open-Mesh devices

802dot11 OUI: AC:86:74 (3 E, 3 W, 2012)
Ethernet OUI: AC:86:74 (3 E, 3 W, 2012)

 CPU1 brandWI1 chip1 brandWI1 chip2 brand
Open-Mesh OM2P v1AtherosAtheros
Open-Mesh OM2P v2AtherosAtheros
Open-Mesh OM2P-HSAtherosAtheros
Open-Mesh OM2P-HSv2AtherosAtheros
Open-Mesh OM2P-LCAtherosAtheros
For a list of all currently documented Atheros chipsets with specifications, see Atheros.


OM2P-LC 150Mbps Access Point

On Open-Mesh's store

Datasheet for the OM2P series
Transmit Power is noted to be 20dBm...

"7016A0604001 Ver:1.00" is silkscreened on the board in the FCC photos.

An Atheros logo is visible on the WiSoC in the FCC internal photos.
The SoC is presumed to be AR9331 based on the specifications of the device.

AR9330 / Hornet based (AR9331 and AR1311 being included in that family)

Changeset to support the device on the OpenWrt Trac

The PoE implementation in this device consists of a Passive PoE feed with pins +4,5 and -7,8 at 18 VDC.