See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Open-Mesh OM2P-HSv2

From WikiDevi
Jump to: navigation, search

Open-Mesh OM2P -HSv2

Manuf/OEM/ODM Senao

Country of manuf.: Taiwan

Type: mesh node, access point

Power: 12 VDC, 1 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9.5 mm (LEN)
Power over Ethernet (PoE) tag: 802.3af, standard

CPU1: Atheros AR9341 (520 MHz)
FLA1: 16 MiB
16,777,216 B
131,072 Kib
16,384 KiB
128 Mib
0.0156 GiB
(Spansion FL128PIFL)
RAM1: 64 MiB
67,108,864 B
524,288 Kib
65,536 KiB
512 Mib
0.0625 GiB
(Nanya NT5DS32M16DS-5T)

Expansion IFs: none specified

WI1 chip1: Atheros AR9341
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL

ETH chip1: Atheros AR9341
Switch: Atheros AR9341
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1


Third party firmware supported: OpenWrt

Default SSID: open-mesh (5 addl. devices)
Default login user: root
Default login password: 0p3nm35h
root:0p3nm35h credentials used by 5 additional devices
of which 5 are Open-Mesh devices

802dot11 OUI: AC:86:74 (3 E, 3 W, 2012)
Ethernet OUI: AC:86:74 (3 E, 3 W, 2012)

For a list of all currently documented Atheros chipsets with specifications, see Atheros.

OM2P-HS 300Mbps Access Point

On Open-Mesh's store


The device uses two Lynwave ALA120-052022 antennas.

Difference between OM2P-HS and OM2P-HSv2:

  • OM2P-HS has 1 port supporting passive POE only.
  • OM2P-HSv2 (this device) has 1 port supporting passive POE only, and the 2nd port supporting standard 802.11af POE.

The Passive PoE implementation in this device consists of a Passive PoE feed with pins +4,5 and -7,8 at 18 VDC.