See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Netgear WN1000RP

From WikiDevi
Jump to: navigation, search

Netgear WN1000RP

Manuf/OEM/ODM Delta Networks

FCC approval date: 02 April 2012
UPC: 606449083071 (UPC DB, On eBay)
Country of manuf.: China

Amazon image

ASIN
B008GGB342 (Flag of the United States.svg, On Amazon, On CCC)

Type: range extender

FCC ID: PY311400182

Power: 100-240 VAC ~ 50-60 Hz, 0.2 A
Connector type: NEMA 1-15P

CPU1: Broadcom BCM5356C0 (300 MHz)
FLA1: 4 MiB
4,194,304 B
32,768 Kib
4,096 KiB
32 Mib
0.00391 GiB
(Macronix MX25L3206EM2I-12G)
RAM1: 16 MiB
16,777,216 B
131,072 Kib
16,384 KiB
128 Mib
0.0156 GiB
(Winbond W9412G6JH-5)

Expansion IFs: none specified

WI1 chip1: Broadcom BCM5356C0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

bgn

Default IP address: 192.168.1.250
the IP 192.168.1.250 is used by 20 additional devices
of which 6 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 399 additional devices
of which 288 are Netgear devices

802dot11 OUI: 00:8E:F2 (2 E, 5 W, 2012), E4:F4:C6 (3 E, 3 W, 2014)
Ethernet OUI: 00:8E:F2 (2 E, 5 W, 2012), E4:F4:C6 (3 E, 3 W, 2014)

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.


WiFi Booster for Mobile Devices

Product page

"2976406102" is silkscreened on the board in the FCC photos.

See also: Netgear and Delta Networks

Model: WN1000RP

Boot log[edit]

boot log
 Decompressing...done
CFE version 5.60.130.20 @VERSION_TYPE@ dni 0.48 
 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Dec 27 04:04:49 EST 2012 (ken.gao@dni-l-sw02)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
Found a 4MB ST compatible serial flash
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.130.20 
 @VERSION_TYPE@ dni 0.48
CPU type 0x19749: 300MHz
Tot mem: 16384 KBytes
CFE mem:    0x80700000 - 0x8079D4B0 (644272)
Data:       0x80733460 - 0x80736670 (12816)
BSS:        0x80736670 - 0x807374B0 (3648)
Heap:       0x807374B0 - 0x8079B4B0 (409600)
Stack:      0x8079B4B0 - 0x8079D4B0 (8192)
Text:       0x80700000 - 0x8073345C (210012)
------init2
Device eth0:  hwaddr E4-F4-C6-F3-B7-F5, ipaddr 192.168.1.250, mask 255.255.255.0
        gateway not set, nameserver not set
flag:1
led init
clear ret=0xf80
outen ret=0xf80
set ret=0xb80
0
Please press Ctrl-C to stop autoboot
xxx ui_cmd_go 
flag:1
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .... 1662976 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
==flag m:0
CPU ProcId is: 0x00019749, options: 0x000021cd
Primary instruction cache 32kb, linesize 32 bytes (4 ways)
Primary data cache 32kb, linesize 32 bytes (4 ways)

Linux version 2.4.20 (ken.gao@dni-l-sw02) (gcc version 3.2.3 
with Broadcom modifications) #1 Thu Mar 28 10:38:41 EDT 2013
Found a 4MB ST compatible serial flash
Determined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM53572 rev 1 at 300 MHz
Calibrating delay loop... 149.91 BogoMIPS
Memory: 14372k/16384k available (1383k kernel code, 2012k reserved, 108k data, 112k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 8) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
pflash: found no supported devices
sflash: squash filesystem with lzma found at block 698

Creating 7 MTD partitions on "sflash":
0x00000000-0x00020000 : "boot"
0x00020000-0x003b0000 : "linux"
0x000ae9dc-0x003b0000 : "rootfs"
0x003b0000-0x003d0000 : "language_table"
0x003d0000-0x003e0000 : "pot"
0x003e0000-0x003f0000 : "nvram2"
0x003f0000-0x00400000 : "nvram"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (128 buckets, 2048 max) - 368 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
BCM fast NAT: INIT
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
netlink_kernel_create ok
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 112k freed
nvram2_get
nvram2_get over
Using /lib/modules/2.4.20/kernel/drivers/net/ctf/ctf.o
Using /lib/modules/2.4.20/kernel/drivers/net/emf/emf.o
Using /lib/modules/2.4.20/kernel/drivers/net/igs/igs.o
Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
insmod: bcm57xx.o: no module by that name found
Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o
Hit enter to continue...wl0.1: No such device
The abbreviation of English is Eng!
Failed to fread data from /dev/mtd/3!
Didn't find the language table we need!
gui_region = English
region = English, download_region =  
 Update string table successfully, memory usage: 80KB.
The httpd server is running ...
led control running....
POT is Running...
The POT-(Get/Set) Demo is Running ...
WARNING: console log level set to 1
eth1: Operation not permitted
wlconf: PHYTYPE: 4
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Operation not supported
NET: Setting wl0.1 hw addr to E4:F4:C6:F3:B7:F5
NET: Error setting hw for wl0.1; returned -1
bcns:0
con_flag:0
info, udhcp client (v0.9.8) started
killall: wps_monitor: no process killed
killall: wps_ap: no process killed
killall: wps_enr: no process killed
ses: No such file or directory
ses_cl: No such file or directory
The attached devices demo is Running ...
mac is E4F4C6F3B7F5
Hit enter to continue...connect: Network is unreachable
The telnetenable is running ...
Hit enter to continue...killall: udhcpd: no process killed
/usr/share/udhcpc/default.script: line 260: can't create /proc/switch_phy: nonexistent directory
cat: /tmp/link_status: No such file or directory
info, udhcp server (v0.9.8) started
eth0:the count is 0
wl0.1 the count is 0
Hit enter to continue...ap_at_count:0
-------0---------
rm: cannot remove `/tmp/phy_connection': No such file or directory
++++0++++
bcns:0
con_flag:0
rm: cannot remove `/tmp/ping_result': No such file or directory
bcns:0
con_flag:0