See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Netgear R8000P

From WikiDevi
Jump to: navigation, search

Netgear R8000 P-100NAS
Availability: now

Manuf/OEM/ODM Foxconn U12H336 T00 LF

FCC approval date: 09 March 2017
(Est.) release date: 18 August 2017
(Est.) initial retail price (in USD): $300
Country of manuf.: China
Series: AC4000

Amazon image

B072LZZZXB (Flag of the United States.svg, On Amazon, On CCC)
multiple revisions of this device, use caution
On Newegg

Type: wireless router

FCC ID: PY316400363
PCB ID: U12H336T00

Power: 19 VDC, 3.16 A

CPU1: Broadcom BCM4906 (1.8 GHz, 2 cores)
FLA1: 128 MiB
134,217,728 B
1,048,576 Kib
131,072 KiB
1,024 Mib
0.125 GiB
(Spansion S34ML01G200TFI00)
RAM1: 512 MiB
536,870,912 B
4,194,304 Kib
524,288 KiB
4,096 Mib
0.5 GiB
(Samsung K4B4G1646E-BYK0)

Expansion IFs: USB 3.0, USB 2.0
USB ports: 2

WI1 chip1: Broadcom BCM4365E
WI1 chip2: Broadcom BCM4365E
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 3x3:3
WI1 antenna connector: none
WI2 chip1: Broadcom BCM4365E
WI2 802dot11 protocols: bgn
WI2 MIMO config: 3x3:3
WI2 antenna connector: none

ETH chip1: Broadcom BCM4906
Switch: Broadcom BCM4906
LAN speed: 10/100/1000
LAN ports: 4
WAN speed: 10/100/1000
WAN ports: 1


Additional chips
2.4GHz Low Noise Amplifier (LNA);Qorvo (RFMD);3QWRJA;3Q, WRJA;3;
5GHz Front End Module (FEM);Qorvo (RFMD);QPF4519;QPF4519, 58ZE;6;

Stock bootloader: CFE 1.0.38 BCM94908

Stock FW OS: Linux 4.1.27

Flags: MU-MIMO, NitroQAM, VHT160

Default SSID: NETGEARXX (33 addl. devices)
Default login user: admin
Default login password: password
admin:password credentials used by 392 additional devices
of which 284 are Netgear devices

802dot11 OUI: none specified

Netgear R7900PPY316400363
 CPU1 brandWI1 chip1 brandWI2 chip1 brand
Netgear R8000BroadcomBroadcomBroadcom
Netgear R8000PBroadcomBroadcomBroadcom
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

• 2x 1625 Mbps - 2x 3-stream 802.11ac device (80MHz wide 5GHz channel),
• 1x 750 Mbps - max. PHY rate for the 40MHz wide 2.4GHz channel = 4000 Mbps class

Nighthawk X6S - AC4000 Tri-band WiFi Router

Product page  • Support page

Netgear Board ID:

  • U12H336T00_NETGEAR (v1) - BCM4906 @1.8GHz (Dual Core)
  • U12H359T00_NETGEAR (v2 ?) - BCM4908 @1.8GHz (Quad Core)


Forum threads[edit]

CFE boot >> •
R8000P Platform Boot Code V1.0.8
CFE version 1.0.38-161.122 for BCM94908 (64bit,SP,LE)
Build Date: Thu Mar 23 17:26:07 CST 2017 (laider@cpe2rd-s3)
Copyright (C) 2000-2015 Broadcom Corporation.

Boot Strap Register:  0x6fc42
Chip ID: BCM4906_A0, Broadcom B53 Quad Core: 1800MHz
Total Memory: 536870912 bytes (512MB)
Status wait timeout: nandsts=0x50000000 mask=0x40000000, count=0
NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes
NAND flash device: , id 0xeff1 block 128KB size 131072KB
pmc_init:PMC using DQM mode
pmc_init:7 0 ffbd043b 344033c
Board IP address                  :
Host IP address                   :
Gateway IP address                :
Run from flash/host/tftp (f/h/c)  : f
Default host run file name        : vmlinux
Default host flash file name      : bcm963xx_fs_kernel
Boot delay (0-9 seconds)          : 1
Boot image (0=latest, 1=previous) : 0
Default host ramdisk file name    :
Default ramdisk store address     :
Default DTB file name             :
Board Id                          : R8000P
Number of MAC Addresses (1-64)    : 10
Base MAC Address                  : 00:10:18:00:00:00
PSI Size (1-128) KBytes           : 128
Enable Backup PSI [0|1]           : 0
System Log Size (0-256) KBytes    : 0
Auxillary File System Size Percent: 0
flow memory allocation (MB)       : 14
buffer memory allocation (MB)     : 16
DHD 0 memory allocation (MB)      : 0
DHD 1 memory allocation (MB)      : 0
DHD 2 memory allocation (MB)      : 0
WLan Feature                      : 0x00

Please update nvram setting in CFE if possible!
dhd param1 value 0xe00000 in device tree larger than nvram value 0x0. 
 Use device tree value!
Booting Linux on physical CPU 0x0

Linux version 4.1.27 (laider@cpe2rd-s3) (gcc version 5.3.0 
(Buildroot 2016.02) )  #1 SMP PREEMPT Mon Jan 15 14:56:11 CST 2018
CPU: AArch64 Processor [420f1000] revision 0
Detected VIPT I-cache on CPU0
alternatives: enabling workaround for ARM erratum 845719
PERCPU: Embedded 16 pages/cpu @ffffffc01ffd4000 s26304 r8192 d31040 u65536
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 122112
Kernel command line: coherent_pool=1M cpuidle_sysfs_switch
PID hash table entries: 2048 (order: 2, 16384 bytes)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Memory: 439364K/495616K available (5340K kernel code, 321K rwdata, 
 1744K rodata, 244K init, 436K bss, 56252K reserved, 0K cma-reserved)

web info: Waiting for connection on socket 1.
CFE> tftpd
enter ui_cmd_tftpd
Start TFTP server
Loading : ...
Finished loading 46137422 bytes
Check board id fail: image board id (U12H359T00_NETGEAR), on-board id(▒▒▒▒▒▒▒)