See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Netgear R7300DST

From WikiDevi
Jump to: navigation, search

Netgear R7300 DST

Manuf/OEM/ODM Foxconn U12H270 T00

FCC approval date: 19 August 2015
Country of manuf.: China

Amazon image

B01HB56E5G (Flag of the United States.svg, On Amazon, On CCC)

Type: wireless router, Powerline Access Point

FCC ID: PY315200307
Industry Canada ID: 4054A-15200307

Power: 100-240 VAC ~ 50-60 Hz, 1.3 A
Connector type: AC direct

CPU1: Broadcom BCM4709A0 (1 GHz, 2 cores)
CPU2: Broadcom BCM60335
FLA1: 128 MiB
134,217,728 B
1,048,576 Kib
131,072 KiB
1,024 Mib
0.125 GiB
(Spansion S34ML01G200TFI00)
RAM1: 256 MiB
268,435,456 B
2,097,152 Kib
262,144 KiB
2,048 Mib
0.25 GiB
(Samsung K4B2G1646Q-BCK0)

Expansion IFs: USB 3.0, USB 2.0
USB ports: 2
Serial: yes, internal, 4-pin header, 3.3V TTL

WI1 chip1: Broadcom BCM4360
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Broadcom BCM4360
WI2 802dot11 protocols: bgn
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL, RP-SMA

ETH chip1: Broadcom BCM4709A0
ETH chip2: Broadcom BCM54612E
Switch: Broadcom BCM4709A0
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1


Additional chips
2.4GHz Power Amplifier IC;Skyworks;SE2623L;;3;
5GHz Power Amplifier IC;Skyworks;SE5003L1;;3;

Stock bootloader: CFE

Stock FW OS: Linux

Flags: HomePlug AV2, SISO

Default IP address:
the IP is used by 3 additional devices
of which 3 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 408 additional devices
of which 297 are Netgear devices

802dot11 OUI: none specified

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

AC1900 Nighthawk DST Router & DST Adapter
Dead Spot Terminator - 802.11ac Dual Band Gigabit

Product page  • Support page

"PLC_MOUDULE_NETGEAR_60335" is silkscreened on the PLC PCB in the FCC photos.

The device is presumed to use a Broadcom BCM60335 as the HomePlug controller.


"U12H270T00", "801466", "REV.1 GP" is silkscreened on the board (Foxconn)
The device is using BCM4709A + 2x BCM4360 + BCM54612E (SW GbE PLC),
3x SE2623L PAMs for the 2.4GHz radio, 3x SE5003L1 PAMs for the 5GHz radio

See also[edit]