See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

NAG SNR-CPE-ME1

From WikiDevi
Jump to: navigation, search

NAG SNR-CPE -ME1
Availability: now

(Est.) release date: May 2017
Country of manuf.: China
Series: AC750

Local image
SNR-CPE-ME1.png

Type: wireless router, CPE

Power: 12 VDC, 2 A
Connector type: barrel

CPU1: MediaTek MT7621AT (880 MHz, 2 cores)
FLA1: 16 MiB
16,777,216 B
131,072 Kib
16,384 KiB
128 Mib
0.0156 GiB
(GigaDevice GD25Q128CSIG)
RAM1: 256 MiB
268,435,456 B
2,097,152 Kib
262,144 KiB
2,048 Mib
0.25 GiB
(Brand? DDR3)

Expansion IFs: USB 3.0
USB ports: 1

WI1 chip1: MediaTek MT7603EN
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: MediaTek MT7610EN
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 1x1:1
WI2 antenna connector: none

ETH chip1: MediaTek MT7621AT
Switch: MediaTek MT7621AT
LAN speed: 10/100/1000
LAN ports: 4
WAN speed: 10/100/1000
WAN ports: 1

abgn+ac

Additional chips
2.4GHz RF Power Amplifier IC;Skyworks (SiGe);SE2576L;;2;
5GHz RF Power Amplifier IC;Skyworks (SiGe);SE5003L;;1;

Stock bootloader: U-Boot

Stock FW OS: Linux 3.4.113 Wive-NG-MT

Third party firmware supported: Wive-NG (sfstudio) • (blog)

Default SSID: Wive-NG-MT (2 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1119 additional devices
of which 4 are NAG devices
Default login user: Admin
Default login password: Admin
Admin:Admin credentials used by 12 additional devices
of which 4 are NAG devices

802dot11 OUI: F8:F0:82 (4 E, 4 W, 2017)
Ethernet OUI: F8:F0:82 (4 E, 4 W, 2017)

 CPU1 brandWI1 chip1 brandWI2 chip1 brand
NAG SNR-CPE-MD1MediaTekMediaTekMediaTek
NAG SNR-CPE-ME1MediaTekMediaTekMediaTek
NAG SNR-CPE-W4NRalinkRalink
NAG SNR-CPE-W4N (rev.M)MediaTekMediaTek
NAG SNR-CPE-W4N-3GRalinkRalink
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.


AC750 Wireless Dual Band Gigabit Router

Product page

Future support available with Wive-NG (sfstudio) • (blog)

Wive-NG-MT on Wi-CAT (RU)

The bootloader used is assumed to be U-Boot.

Default SSIDs Wive-NG-MT.

Specifications[edit]

SNR-CPE-ME1 on Wi-CAT (RU)
PA: Skyworks (SiGe) SE2576L / SE5003L (?)
20dBm (100mW)/2.4GHz, 23dBm (200mW)/5GHz
  • WAN: 1x GbE, LAN: 4x GbE ports
  • USB: 1x USB 3.0 (power off/on)
supports Entware (Flash/HDD),
3G/4G modem (RAS/NDIS)

See also[edit]

List of Wive-ng firmware supported devices
CPU: MediaTek MT7620N (2T2R 802.11bgn), ESMT
BL-RM7620N-V1.2 • PCB image4pda forum

Images[edit]

SNR-CPE-ME1.png