See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Microsoft MN-700

From WikiDevi
Jump to: navigation, search

Microsoft MN-700
Availability: common

Manuf/OEM/ODM Accton WG4005-68(CM)

FCC approval date: 30 June 2003
(Est.) release date: 06 August 2003
UPC: 805529291836 (UPC DB, On eBay)
Country of manuf.: Taiwan

Amazon image

B0000BZO58 (Flag of the United States.svg, On Amazon, On CCC)

Type: wireless router

Industry Canada ID: 3048A-MN700

Power: 12 VDC, 1 A
Connector type: barrel

CPU1: Broadcom BCM4702 (125 MHz)
FLA1: 4 MiB
4,194,304 B
32,768 Kib
4,096 KiB
32 Mib
0.00391 GiB
(Brand? Model?)
RAM1: 16 MiB
16,777,216 B
131,072 Kib
16,384 KiB
128 Mib
0.0156 GiB
(Micron MT48LC4M32B2)

Expansion IFs: Mini PCI
Mini PCI slots: 1
JTAG: yes, 12-pin header, unpopulated
Serial: possible, no UART, 10-pin header, unpopulated

WI1 module: Broadcom BCM94306MP
WI1 module IF: Mini PCI
WI1 chip1: Broadcom BCM4306
WI1 chip2: Broadcom BCM2050
WI1 802dot11 protocols: bg
WI1 antenna connector: none

ETH chip1: Broadcom BCM4702
ETH chip2: Altima AC101L
Switch: Broadcom BCM5325A2
LAN speed: 10/100
LAN ports: 4
WAN speed: 10/100
WAN ports: 1


Additional chips
2.4GHz Power Amplifier IC;Micro Mobio;;2406, B11F;1;

Third party firmware supported: DD-WRT • (List), Tomato • (List), OpenWrt

Default SSID: MSHOME (1 addl. devices)
Default IP address:
the IP is used by 274 additional devices
of which 1 are Microsoft devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 276 additional devices
of which 1 are Microsoft devices

802dot11 OUI: 00:0D:3A (-, 4 W, 2003)
Ethernet OUI: 00:0D:3A (-, 4 W, 2003)

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

Microsoft® Broadband Networking Wireless Base Station

For one particular production model MN-700...

  • "MN-700", "REV 3.0", "(C) 2003 MICROSOFT CORPORATION", and "P/N: 141400520001J REV: 01" is silkscreened onto the top (primary component side) of the board.
  • "MN-700" and "111362-30" is etched onto the bottom of the board.
  • While there is a clearly marked UART header, the UART and assoc. components are all omitted. It's presumed to be usable if populated. Hopefully..

Additional external links[edit]



This unit by default runs WinCE. To install DD-WRT (or any third party Linux firmware), the bootloader must be replaced.. which will require JTAG access.