See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken
Lucent WaveLAN/IEEE Bronze
Lucent WaveLAN/IEEE Bronze
FCC approval date: 30 March 1998
Country of manuf.: Taiwan
Interface: PCMCIA (16-bit)
ID: 0156:0002
FCC ID: IMRWLPC24
Industry Canada ID: 2301021343A
WI1 chip1: Lucent HERMES I
WI1 chip2: Lucent THESEUS M
WI1 chip3: Philips Model?
Additional chips
IF quadrature transceiver;Philips;SA1630;SA1630BE, 016742, FP026B;1;;LQFP-48;
2.4GHz low-voltage RF transceiver (w/ LNA + mixer);Philips;SA2420;SA2420DH, THAILAND, GMM5730, 9909n-;1;BiCMOS;TSSOP24;
Low-voltage frequency synthesizer for radio telephones (900 / 2GHz);Philips;UMA1021M;MA1021, MQ3025, MSJ9142, TAIWAN;1;BiCMOS;SSOP16;
Parallel Flash memory (1 Mbit);Atmel;AT29C010A-70TC;ATMEL, AT29C010A, 70TC, 9913;1;;TSOP32;
RAM chip;EliteMT;LP62S1024V-55LL;;1;
Probable Linux driver
none
(see also passys)
Antenna connector: MC
legacy (DSSS)
For a list of all currently documented Philips chipsets with specifications, see Philips.
This card is recognized in Windows as a...
- PCMCIA\Lucent_Technologies-WaveLAN/IEEE-0156-0002
- PCMCIA\Lucent_Technologies-WaveLAN/IEEE-C908
These devices would not seem to work with orinoco_cs when using the stock firmware.
- The non-working unit had PRI 2.04 (P1020401.HEX) and STA 3.04 (S1030400.HEX).
.. however, upgrading the firmware to PRI 4.00 (P1040000.HEX) and STA 6.06 (S1060600.HEX) - using the WLW2K601 driver set and its included firmware (WSU10606.EXE) - managed to get the device working w/ NetStumbler in WinXP and w/ orinoco_usb (monitor mode worked, scanning worked, and un-encrypted WiFi to an 11b AP worked in all of its 2Mbps glory).
Additional information, per Lucent's product brief[edit]
The product brief for the 2Mb WaveLAN/IEEE models was found here.
Typical Receiver Sensitivity w/ 11b rates (more)
- -93 dBm @ 1M
- -90 dBm @ 2M