See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Linksys WRTU54G-TM

From WikiDevi
Jump to: navigation, search

Linksys WRTU54G-TM
Availability: Discontinued

Manuf/OEM/ODM Tecom

FCC approval date: 07 August 2007
UPC: 745883575350 (UPC DB, On eBay)
Country of manuf.: China

Amazon image

ASIN
B003UBJZ6G (Flag of the United States.svg, On Amazon, On CCC)

Type: wireless router, analog phone gateway

FCC ID: Q87-WRTU54G
Industry Canada ID: 3839A-WRTU54G

Power: 12 VDC, 1.5 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 10 mm (LEN)

CPU1: Infineon ADM8668FX (200 MHz)
FLA1: 8 MiB
8,388,608 B
65,536 Kib
8,192 KiB
64 Mib
0.00781 GiB
(Macronix MX29LV640DBTC-90G)
RAM1: 64 MiB
67,108,864 B
524,288 Kib
65,536 KiB
512 Mib
0.0625 GiB
(Mira P3V56S40ETP-G6 × 2)

Expansion IFs: none specified
Serial: yes, (115200,8,N,1)

WI1 chip1: Ralink RT2561S
WI1 chip2: Ralink RT2527
WI1 802dot11 protocols: bg
WI1 antenna connector: U.FL, RP-SMA

ETH chip1: Infineon ADM8668FX
Switch: Infineon ADM6996M
LAN speed: 10/100
LAN ports: 4
WAN speed: 10/100
WAN ports: 1

bg

Additional chips
Ringing SLIC with Integrated DC/DC Converter;Infineon;PEF 4268 T V1.2;Infineon, PEF 4268 T, V1.2, VE816226N17;2;
VINETIC-2AMR Voice Processor;Infineon;PEB 3352 HT V1.2;;
Smart Card Reader;ST Microelectronics;GCSIMPRO 1.00;;

Stock bootloader: U-Boot 2.1.4

Stock FW OS: Linux 2.4.31

Third party firmware supported: OpenWrt

Flags: boot log

Default SSID: @HomeXXXX (2 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 729 additional devices
of which 6 are Linksys devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1185 additional devices
of which 58 are Linksys devices

802dot11 OUI: 00:1E:E5 (11 E, 21 W, 2007), 00:21:29 (9 E, 16 W, 2007), 00:22:6B (8 E, 11 W, 2007)
Ethernet OUI: 00:1E:E5 (11 E, 21 W, 2007), 00:21:29 (9 E, 16 W, 2007), 00:22:6B (8 E, 11 W, 2007)

For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.


Wireless-G Broadband Router with 2 Phone Ports
 • Support page  • (Template link outdated)

2010-12-16 final firmware version 1.00.25

WRTU54G-TM serial numbers appear to start with QMF0.

Linksys WRTU54G-TM v1.0 on TechInfoDepot (board images)

WRTU54G-TM and OpenWrt

Info dump

"613-180173R" is silkscreened on the board.

This is presumed to be a Tecom P/N.

The default SSID is @HomeXXXX where XXXX is the last two octets of the wireless interface MAC address (upper case letters).

The power adapter included with the device is a PSA18R-120P (12V, 1.5A).

Images[edit]

Serial[edit]

Pinout[edit]

JP2

1 [VCC]
2 [TxD]
3 [RxD]
4 [GND]

Boot log[edit]


07e?4

(v1.00.02) U-Boot 2.1.4 (Jan 28 2008 - 14:56:42)

DRAM:  64 MB
Flash:  8 MB
In:    serial
Out:   serial
Err:   serial
Net:   adm8668_net
Hit any key to stop autoboot:  0
## Booting image at b0040000 ...
Check vendor string...    Image Name:   ADM8668 Linux Kernel(2.4.31)
   Created:      2010-05-26   0:52:58 UTC
   Image Type:   MIPS Linux Kernel Image (gzip compressed)
   Data Size:    5664704 Bytes =  5.4 MB
   Load Address: 00002000
   Entry Point:  80222040
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...


LINUX/8668 started...
CPU revision is: 0001800b
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Linux version 2.4.31-ADM8668 (root@localhost.localdomain) (gcc version 3.3.6) #1.00.25 17:51:34 PDT 05/25/2010
Can't analyze prologue code at 8001f824
adm8668_setup() starts.
System has PCI BIOS
Determined physical RAM map:
 memory: 03d88000 @ 00278000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: rootfstype=squashfs root=/dev/mtdblock1 console=/dev/ttyS0
CPU clock: 200 MHz
Using 100.000 MHz high precision timer.
Syam before calibrate_delay
Calibrating delay loop...
199.47 BogoMIPS
Syam after calibrate_delay
MIPS CPU counter frequency is fixed at 100000000 Hz
Memory: 62296k/63008k available (2160k kernel code, 712k reserved, 124k data, 104k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction...  available.
POSIX conformance testing by UNIFIX
The GAN WDT version is 0.0.1 The Built TIME is 17:52:43
Autoconfig PCI channel 0x8025c9f8
Scanning bus 00, I/O 0x12600000:0x12800000, Mem 0x16000000:0x1e000000
00:00.0 Class 0600: 1317:8688
        Mem unavailable -- skipping
        I/O at 0x12600000 [size=0x100000]
00:01.0 Class 0280: 1814:0301
        Mem at 0x16000000 [size=0x8000]
ADM8668 PCI FIXUP
PCI_BIOS_FIXUP
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher
pty: 256 Unix98 ptys configured
HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
N_HDLC line discipline registered.
NOR flash vendor: 0xc2 device: 0x22cb
Backup segment is working!
ADM8668 proc initialization okay!
adm1: Infineon-ADMtek onchip network rev 0 at 0x11600000, 00:1E:E5:B7:0E:32, IRQ 8.
adm0: Infineon-ADMtek onchip network rev 0 at 0x11a00000, 00:1E:E5:B7:0E:31, IRQ 7.
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
*RT61*<7>===> RT61_init_one
*RT61*<7>Driver version-1.1.0.0
*RT61*<7>ra0: at 0x16000000, VA 0xb6000000, IRQ 14.
*RT61*<7><=== RT61_init_one
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub

 usb_hcd_arc_probe :  ehci_hcd
 USB Base Address: b1200100<6>usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 1 port detected
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 600 bytes per conntrack
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
ADM8668 NOR flash device: 800000 at 10000000
ADM8668 NOR flash device: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 2 MTD partitions on "ADM8668 NOR flash device":
0x00030000-0x001b0000 : "Kernel Image"
0x00200000-0x00600000 : "LZMA Image"
ADM8668 NOR flash device initialized
VFS: Mounted root (squashfs filesystem) readonly.
Freeing prom memory: 0kb freed
Freeing unused kernel memory: 104k freed
init started:  BusyBox v1.00 (2010.05.26-00:45+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
Starting RAWACCESS device driver...
Using /lib/modules/ifx_raw_acs
(raw_acs)Init raw_acs successfully!
Vendor: 0xc2 Device: 0x22cb Flash size: 800000
hub.c: new USB device ehci_hcd-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x8e6/0x3480) is not claimed by any active driver.
rawdev opened!
(raw_acs)flash_read (b0020000)
Read RAW_INFO...
Read 19685 bytes from flash (fd: 3)
18229 bytes...Uncompressed to...124221 bytes
Write 13270 bytes to /nv/rc.conf
Write 352 bytes to /nv/udhcpd.leases
Write 3600 bytes to /nv/umastatus1.log
Write 203 bytes to /nv/prd_config.txt
Write 414 bytes to /nv/rc.static
Write 960 bytes to /nv/11e_info
Write 21018 bytes to /nv/LICENSE
Write 14582 bytes to /nv/rc.filter
Write 1297 bytes to /nv/RT61AP.dat
Write 1469 bytes to /nv/rc.wlanmac
Write 4208 bytes to /nv/ccmapper.conf
Write 5120 bytes to /nv/kineto_ps_01
Write 28864 bytes to /nv/nas_1.conf
Write 28864 bytes to /nv/nas_2.conf
Read data completely!
rawdev opened!
Set raw access addr: 201f0000(raw_acs)ioctl: RAWDRV_IOCSRAWACSADDR
(raw_acs)Raw Access Addr: 201f0000

rawdev opened!
(raw_acs)flash_read (b05f0000)
Read RAW_INFO...
Read 6003 bytes from flash (fd: 3)
Data Not Compressed!
Write 4547 bytes to /tmp/crt.pem
Read data completely!
rawdev opened!
Set raw access addr: 1fc20000(raw_acs)ioctl: RAWDRV_IOCSRAWACSADDR
(raw_acs)Raw Access Addr: 1fc20000

The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
The rc.conf is up-to-day.
Starting GAN-VINETIC Board driver...
Using ./BSP_GAN_driver
Warning: loading BSP_GAN_driver will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Vinetic Board Driver(Included SPI driver) Version : 1.0.0
Starting VINETIC device driver...
Using ./drv_vinetic
Warning: loading drv_vinetic will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
VINETIC device driver, version 1.1.17.3
<6>(c) Copyright 2006, Infineon Technologies AG
Using /lib/modules/swmod.o
Loading ADM6996 driver...
Kernel module version: v1.0 Driver version: v2.0beta3 Date code: 2008-11-20
Setting default ADM6996 registers...
ADM6996 proc initialization okay!
Set queue 1 to priority 2
Set queue 2 to priority 4
Set queue 3 to priority 8
Version: CCMAPPER_LIGHT_V1.00
<7>WARN:  No ring configuration in BBD => default ring config is programmed
<7>WARN:  No dc threshold configuration in BBD => default threshold configuration is programmed
Sherlock Debug nEdspVers != 0x0200
Using /usr/nas/klinux.o
Warning: loading klinux will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /usr/nas/sio_ring.o
Warning: loading sio_ring will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /usr/nas/io_lchan.o
Warning: loading io_lchan will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /usr/nas/io_lphone.o
Warning: loading io_lphone will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /usr/nas/io_lapp.o
Warning: loading io_lapp will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/kbutton.o
Loading ADM8668 kbutton driver: Version 1.02
Using /lib/modules/ip_conntrack_proto_gre.o
TMO Pairing Version : 1.0.3
Using /lib/modules/ip_conntrack_pptp.o
ip_conntrack_pptp version 1.9 loaded
Using /lib/modules/ip_nat_proto_gre.o
Using /lib/modules/ip_nat_pptp.o
ip_nat_pptp version 1.5 loaded
Tue Apr 17 17:29:00 UTC 2012
Initialize Ralink Wlan ...
Setting Pairing LED to : ON-Green
*RT61*<7>===> NICLoadFirmware
*RT61*<7>NICLoadFirmware: CRC ok, ver=1.2
*RT61*<7><=== NICLoadFirmware (src=/etc/Wireless/RT61AP/RT2561S.bin, status=0)
*RT61*<7>--> RTMPAllocAdapterBlock
*RT61*<7><-- RTMPAllocAdapterBlock
*RT61*<7>--> RTMPAllocDMAMemory
*RT61*<7>TxRing[0]: total 96 entry allocated
*RT61*<7>TxRing[1]: total 96 entry allocated
*RT61*<7>TxRing[2]: total 96 entry allocated
*RT61*<7>TxRing[3]: total 96 entry allocated
*RT61*<7>TxRing[4]: total 96 entry allocated
*RT61*<7>MGMT Ring: total 32 entry allocated
*RT61*<7>Rx Ring: total 96 entry allocated
*RT61*<7><-- RTMPAllocDMAMemory
*RT61*<7><--> NICInitTxRxRingAndBacklogQueue
*RT61*<7>--> MLME Initialize
*RT61*<7><-- MLME Initialize
*RT61*<7>--> PortCfgInit
*RT61*<7><-- PortCfgInit
*RT61*<7>--> NICInitializeAdapter
*RT61*<7>--> NICInitializeAsic
*RT61*<7>BBP version = 22
*RT61*<7><-- NICInitializeAsic
*RT61*<7><-- NICInitializeAdapter
*RT61*<7>CountryRegion=5
*RT61*<7>CountryRegionABand=7
*RT61*<7>CountryCode=
*RT61*<7>SSID[0]=FlowersEstateFreeInternetService
*RT61*<7>PhyMode=0
*RT61*<7>I/F(ra0) TxRate=(6c,60,48,30,16,0b,04,02,00,00,00,00)
*RT61*<7>Channel=6
*RT61*<7>BasicRate=15
*RT61*<7>BeaconPeriod=100
*RT61*<7>DtimPeriod=1
*RT61*<7>TxPower=100
*RT61*<7>BGProtection=2
*RT61*<7>OLBCDetection=0
*RT61*<7>TxAntenna=1
*RT61*<7>RxAntenna=
*RT61*<7>TxPreamble=0
*RT61*<7>RTSThreshold=2347
*RT61*<7>FragThreshold=2346
*RT61*<7>TxBurst=0
*RT61*<7>PktAggregate=1
*RT61*<7>TurboRate=0
*RT61*<7>I/F(ra0) WmmCapable=1
*RT61*<7>I/F(ra0) DLSCapable=0
*RT61*<7>APAifsn[0]=3
*RT61*<7>APAifsn[1]=7
*RT61*<7>APAifsn[2]=1
*RT61*<7>APAifsn[3]=1
*RT61*<7>APCwmin[0]=4
*RT61*<7>APCwmin[1]=4
*RT61*<7>APCwmin[2]=3
*RT61*<7>APCwmin[3]=2
*RT61*<7>APCwmax[0]=6
*RT61*<7>APCwmax[1]=10
*RT61*<7>APCwmax[2]=4
*RT61*<7>APCwmax[3]=3
*RT61*<7>APTxop[0]=0
*RT61*<7>APTxop[1]=0
*RT61*<7>APTxop[2]=94
*RT61*<7>APTxop[3]=47
*RT61*<7>APACM[0]=0
*RT61*<7>APACM[1]=0
*RT61*<7>APACM[2]=0
*RT61*<7>APACM[3]=0
*RT61*<7>BSSAifsn[0]=3
*RT61*<7>BSSAifsn[1]=7
*RT61*<7>BSSAifsn[2]=2
*RT61*<7>BSSAifsn[3]=2
*RT61*<7>BSSCwmin[0]=4
*RT61*<7>BSSCwmin[1]=4
*RT61*<7>BSSCwmin[2]=3
*RT61*<7>BSSCwmin[3]=2
*RT61*<7>BSSCwmax[0]=10
*RT61*<7>BSSCwmax[1]=10
*RT61*<7>BSSCwmax[2]=4
*RT61*<7>BSSCwmax[3]=3
*RT61*<7>BSSTxop[0]=0
*RT61*<7>BSSTxop[1]=0
*RT61*<7>BSSTxop[2]=94
*RT61*<7>BSSTxop[3]=47
*RT61*<7>BSSACM[0]=0
*RT61*<7>BSSACM[1]=0
*RT61*<7>BSSACM[2]=0
*RT61*<7>BSSACM[3]=0
*RT61*<7>AckPolicy[0]=0
*RT61*<7>AckPolicy[1]=0
*RT61*<7>AckPolicy[2]=0
*RT61*<7>AckPolicy[3]=0
*RT61*<7>APSDCapable=1
*RT61*<7>I/F(ra0) NoForwarding=0
*RT61*<7>NoForwardingBTNBSSID=0
*RT61*<7>I/F(ra0) HideSSID=0
*RT61*<7>ShortSlot=1
*RT61*<7>AutoChannelAtBootup=0
*RT61*<7>MaxTxPowerLevel=16
*RT61*<7>IEEE8021X=0
*RT61*<7>IEEE80211H=0
*RT61*<7>CSPeriod=10
*RT61*<7>PreAuth=0
*RT61*<7>RTMPMakeRSNIE IF(ra0): RSNIE_Len[0]=6, RSNIE_Len[1]=0
*RT61*<7>I/F(ra0) AuthMode=4
*RT61*<7>RTMPMakeRSNIE IF(ra0): RSNIE_Len[0]=22, RSNIE_Len[1]=0
*RT61*<7>I/F(ra0) EncrypType=4
*RT61*<7>ReKeyMethod=0
*RT61*<7>ReKeyInterval=3600
*RT61*<7>PMKCachePeriod=60000
*RT61*<7>I/F(ra0) WPAPSK_KEY=white202
*RT61*<7>strong RSSI=0, CCA=0, fixed R17 at 0x41, R62=4
*RT61*<7>I/F(ra0) WPAPSK Key =>
9f:6d:17:ac:71:84:b0:4f:c5:48:b2:5b:3d:92:68:81:
f7:cc:5a:9d:e6:f7:c4:f2:fa:fd:1e:0d:65:39:a1:32:

*RT61*<7>I/F(ra0) DefaultKeyID(0~3)=1
*RT61*<7>I/F(ra0) Key1Str=f933e98d7a and type=Hex
*RT61*<7>I/F(ra0) Key2Str=9456cc6905 and type=Hex
*RT61*<7>I/F(ra0) Key3Str=8ecdaf99de and type=Hex
*RT61*<7>I/F(ra0) Key4Str=f52d7e4f7a and type=Hex
*RT61*<7>HSCounter=0
*RT61*<7>AccessPolicy0=0
*RT61*<7>AccessControlList0=Get 0 Mac Address
*RT61*<7>--> NICReadEEPROMParameters
*RT61*<7>MBSSID[0] MAC=00:1e:e5:b7:0e:30
*RT61*<7>E2PROM: Version = 1, FAE release #0
*RT61*<7>E2PROM: G Tssi[-4 .. +4] = 255 255 255 255 - 255 -255 255 255 255, step=255, tuning=0
*RT61*<7>E2PROM: A Tssi[-4 .. +4] = 255 255 255 255 - 255 -255 255 255 255, step=255, tuning=0
*RT61*<7>E2PROM: RF freq offset=0x11, RF programming seq=0
*RT61*<7>TxPowerDelta Config (Delta=2, Sign=0, Enable=1)
*RT61*<7><-- NICReadEEPROMParameters
*RT61*<7>country code=5/7, RFIC=1, PHY mode=0, support 14 channels
*RT61*<7>channel #1
*RT61*<7>channel #2
*RT61*<7>channel #3
*RT61*<7>channel #4
*RT61*<7>channel #5
*RT61*<7>channel #6
*RT61*<7>channel #7
*RT61*<7>channel #8
*RT61*<7>channel #9
*RT61*<7>channel #10
*RT61*<7>channel #11
*RT61*<7>channel #12
*RT61*<7>channel #13
*RT61*<7>channel #14
*RT61*<7>IF(ra0) RTMPSetPhyMode(=0)
*RT61*<7>I/F(ra0) TxRate=(6c,60,48,30,16,0b,04,02,00,00,00,00)
*RT61*<7>--> NICInitAsicFromEEPROM
*RT61*<7>RFIC=3, LED mode=26
*RT61*<7><-- NICInitAsicFromEEPROM
*RT61*<7>---> ApInitialize
*RT61*<7><--- ApInitialize
*RT61*<7>---> ApStartUp
*RT61*<7>IF(ra0) CapabilityInfo=411, WepStatus=4
*RT61*<7>IF(ra0)-AP AuthMode=4, IEEE802.1x is 0, Pairwise Key Table in-used
*RT61*<7>AsicRemoveSharedKeyEntry: #0
*RT61*<7>AsicRemoveSharedKeyEntry: #1
*RT61*<7>AsicRemoveSharedKeyEntry: #2
*RT61*<7>AsicRemoveSharedKeyEntry: #3
*RT61*<7>AsicSetEdcaParm
*RT61*<7>AP [Cnt#0]: AIFSN CWmin CWmax TXOP(us)  ACM
*RT61*<7>    AC_BE     3     4     6        0     0
*RT61*<7>    AC_BK     7     4     10        0     0
*RT61*<7>    AC_VI     1     3     4     3008     0
*RT61*<7>    AC_VO     1     2     3     1504     0
*RT61*<7>STA        : AIFSN CWmin CWmax TXOP(us)  ACM
*RT61*<7>    AC_BE     3     4   10       0     0
*RT61*<7>    AC_BK     7     4   10       0     0
*RT61*<7>    AC_VI     2     3     4    3008     0
*RT61*<7>    AC_VO     2     2     3     1504     0
*RT61*<7>AsicSwitchChannel(RF=3, Pwr=14) to #6, R1=0x95002ccc, R2=0x9500478e, R3=0x95069c55, R4=0x950d1a1f
*RT61*<7>UpdateBasicRateBitmap::(BasicRateBitMap=f)(82,84,8b,96,0c,12,18,24,30,48,60,6c)
*RT61*<7>IF(ra0) MlmeUpdateTxRates (MaxDesire=54 Mbps, MaxSupport=54 Mbps, MaxTxRate=54 Mbps, Rate Switching =1)
*RT61*<7> MlmeUpdateTxRates (RtsRate=11 Mbps, MlmeRate=1 Mbps, BasicRateBitmap=0x015f)
*RT61*<7>MakeBssBeacon(ra0)(FrameLen=103,TimIELocateInBeacon=103,CapInfoLocateInBeacon=34)
*RT61*<7>SW interrupt MCU (cmd=0x60, token=0xff, arg1,arg0=0x00,0x00)
*RT61*<7>--->AsicEnableBssSync(INFRA mode)
*RT61*<7>--->Disable TSF synchronization
*RT61*<7>SW interrupt MCU (cmd=0x50, token=0xff, arg1,arg0=0x3f,0x3a)
*RT61*<7>MlmePeriodicExec: no traffic, Reset AsicBbpTuning
*RT61*<7>Reset AsicBbpTuning, BBP_R62=4, OneSecFalseCCACnt=263
*RT61*<7>SW interrupt MCU (cmd=0x50, token=0xff, arg1,arg0=0x3f,0x7a)
*RT61*<7>LOG#0 00:1e:e5:b7:0e:30 restart access point
*RT61*<7><--- ApStartUp (sec_csr4=0x1)
*RT61*<7>==> Set_Debug_Proc *******************
Ralink Wlan is ready.
device adm0 entered promiscuous mode
device ra0 entered promiscuous mode
adm0: Promiscuous mode enabled.
adm0: Promiscuous mode enabled.
adm0: Promiscuous mode enabled.
br0: port 2(ra0) entering learning state
br0: port 1(adm0) entering learning state
Killall luma applications...
Run luma applicaitons...
LUMA Agent starting...
LUMA LogP starting...
Starting DHCP Client ....
udhcpc (v0.9.9-pre) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background.
Setting Hostname: .
br0: port 2(ra0) entering forwarding state
br0: topology change detected, propagating
br0: port 1(adm0) entering forwarding state
br0: topology change detected, propagating
[: reconfig: unknown operand
[: rerun: unknown operand
[: rerun: unknown operand
Failure parsing line 8 of /etc/udhcpd.conf
udhcpd (v0.9.9-pre) started
Unable to open /var/lib/misc/udhcpd.leases for reading
rawdev opened!
(WRITE) addr: 0200, value: b100
(WRITE) addr: 0220, value: b100
(WRITE) addr: 0240, value: b100
(WRITE) addr: 0260, value: b100
NV Daemon Version : 1.1.0
Daemon Successfully forked (pid: 431)
rawdev opened!
/nv/rc.conf: 13263 bytes
/nv/nas_2.conf: 28864 bytes
/nv/nas_1.conf: 28864 bytes
/nv/kineto_ps_01: 5120 bytes
/nv/ccmapper.conf: 4208 bytes
/nv/rc.wlanmac: 1469 bytes
/nv/RT61AP.dat: 1288 bytes
/nv/rc.filter: 14582 bytes
/nv/LICENSE: 21018 bytes
/nv/11e_info: 960 bytes
/nv/rc.static: 414 bytes
/nv/prd_config.txt: 203 bytes
/nv/umastatus1.log: 3600 bytes
Files: 13
(raw_acs)ioctl: RAWDRV_IOCRSRAWACS
(raw_acs)Raw Access Addr: 1fc20000
Got 13263 bytes from /nv/rc.conf
Got 28864 bytes from /nv/nas_2.conf
Got 28864 bytes from /nv/nas_1.conf
Got 5120 bytes from /nv/kineto_ps_01
Got 4208 bytes from /nv/ccmapper.conf
Got 1469 bytes from /nv/rc.wlanmac
Got 1288 bytes from /nv/RT61AP.dat
Got 14582 bytes from /nv/rc.filter
Got 21018 bytes from /nv/LICENSE
Got 960 bytes from /nv/11e_info
Got 414 bytes from /nv/rc.static
Got 203 bytes from /nv/prd_config.txt
Got 3600 bytes from /nv/umastatus1.log
123853 bytes...Compressed to...18212 bytes
Copy 1456 bytes to buffer
(raw_acs)Write 19668
Write 19668 bytes to rawdev!
Store /nv/* to flash completely!

Please press Enter to activate this console.