See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Linksys WRT32X

From WikiDevi
Jump to: navigation, search

Linksys WRT32X
Availability: now

FCC approval date: 12 June 2017
(Est.) release date: 03 January 2017
(Est.) initial retail price (in USD): $299.99
Country of manuf.: China
Series: AC3200

Amazon image

ASINs
B072LQZFHM (Flag of the United States.svg, On Amazon, On CCC)
B079XSHN1F (Flag of the United States.svg, On Amazon, On CCC)
On Newegg

Type: wireless router

FCC ID: Q87-WRT3200ACM
Industry Canada ID: 3839A-WRT3200ACM

Power: 12 VDC, 3 A
Connector type: barrel

CPU1: Marvell 88F6820 (1.8 GHz, 2 cores)
FLA1: 256 MiB
268,435,456 B
2,097,152 Kib
262,144 KiB
2,048 Mib
0.25 GiB
(Winbond / MXIC (W29N02GV) NAND)
RAM1: 512 MiB
536,870,912 B
4,194,304 Kib
524,288 KiB
4,096 Mib
0.5 GiB
(Micron DDR3 × 2)

Expansion IFs: USB 3.0, USB 2.0 / eSATA (combo port)
USB ports: 2
SATA ports: 1
JTAG: yes, 20-pad header
Serial: yes, 6-pin header

WI1 chip1: Marvell 88W8964
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 4x4:3
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Marvell 88W8964
WI2 802dot11 protocols: bgn
WI2 MIMO config: 4x4:3
WI2 antenna connector: U.FL, RP-SMA

ETH chip1: Marvell 88F6820
Switch: Marvell 88E6352
LAN speed: 10/100/1000
LAN ports: 4
WAN speed: 10/100/1000
WAN ports: 1

abgn+ac

Stock bootloader: U-Boot

Stock FW OS: Linux 4.4.14

Third party firmware supported: OpenWrt, DD-WRT • (List)

Flags: Wave2, MU-MIMO, VHT160, AP3200, DFS

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1087 additional devices
of which 142 are Linksys devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 275 additional devices
of which 140 are Linksys devices

802dot11 OUI: 60-38-E0
Ethernet OUI: 60-38-E0

 FCC ID
Linksys WRT3200ACMQ87-WRT3200ACM
For a list of all currently documented Marvell chipsets with specifications, see Marvell.


2600 Mbps - 3-stream 802.11ac device (160MHz bandswidth, 867Mbps/stream),
600 Mbps - max. PHY rate for the 40MHz wide 2.4GHz channel = 3200 Mbps class

AC3200 MU-MIMO Dual-Band Gaming Router

Product page Support page
User Guide
Open Source licences

Added to the FCC entry for the Linksys WRT3200ACM

via Class II Permissive Change on 6/12/2017.

C2PC: - Adding a new model name: Linksys WRT32X

- Changing the firmware for the new model
- Changing the enclosure color for the new model

This device has 20/40/80/160 MHz bandwidth modes.

Specifications[edit]

  • CPU: Marvell 88F6820-A0 C180 @1.8GHz (Armada 385)
  • Flash: 256MB (NAND), RAM: 512MB (DDR3)
  • WLAN: 2x Marvell 88W8964 4T4R 802.11abgn/ac (MU-MIMO)
  • Switch: Marvell 88E6352 (7-Port AVB GbE Switch, 5x GbE PHY)
  • LED: Status light behavior
  • Dimensions: 245.9 x 193.8 x 51.8 mm (9.7 x 7.6 x 2.0 in.) without antennas
  • Weight: 798.32 g (28.16 oz)

Linksys firmware boot log[edit]

dmesg from firmware 1.0.180404.58 >> •
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.14 (jenkins@ip-10-226-178-37) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 50140) ) #4 SMP Wed Apr 4 18:23:44 UTC 2018
[    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Linksys WRT32X
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 131072
[    0.000000] free_area_init_node: node 0, pgdat c05cdec0, node_mem_map dfbf9000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 12 pages/cpu @dfbcf000 s17984 r8192 d22976 u49152
[    0.000000] pcpu-alloc: s17984 r8192 d22976 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console= root=/dev/mtdblock8
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 513212K/524288K available (4096K kernel code, 173K rwdata, 1532K rodata, 256K init, 295K bss, 11076K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0587418   (5630 kB)
[    0.000000]       .init : 0xc0588000 - 0xc05c8000   ( 256 kB)
[    0.000000]       .data : 0xc05c8000 - 0xc05f3434   ( 174 kB)
[    0.000000]        .bss : 0xc05f3434 - 0xc063d12c   ( 296 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 D prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[    0.000000] Selected CPU frequency (16) unsupported
[    0.000000] Switching to timer-based delay loop, resolution 40ns
[    0.000002] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
[    0.000007] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.000102] Calibrating local timer... 933.11MHz.
[    0.060025] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.060029] pid_max: default: 32768 minimum: 301
[    0.060064] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.060068] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.060229] CPU: Testing write buffer coherency: ok
[    0.060318] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.060339] Setting up static identity map for 0x8280 - 0x82d8
[    0.060404] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[    0.060468] mvebu-pmsu: Initializing Power Management Service Unit
[    0.060806] Booting CPU 1
[    0.060956] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.060978] Brought up 2 CPUs
[    0.060983] SMP: Total of 2 processors activated (100.00 BogoMIPS).
[    0.060986] CPU: All CPU(s) started in SVC mode.
[    0.062403] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.062467] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.062500] pinctrl core: initialized pinctrl subsystem
[    0.062768] NET: Registered protocol family 16
[    0.063173] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.090030] cpuidle: using governor ladder
[    0.092195] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[    0.092202] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[    0.110396] reg-fixed-voltage xhci0-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/xhci0-vbus-pins, deferring probe
[    0.110538] SCSI subsystem initialized
[    0.110599] libata version 3.00 loaded.
[    0.110705] usbcore: registered new interface driver usbfs
[    0.110731] usbcore: registered new interface driver hub
[    0.110752] usbcore: registered new device driver usb
[    0.111209] clocksource: Switched to clocksource armada_370_xp_clocksource
[    0.111576] NET: Registered protocol family 2
[    0.111769] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.111791] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.111819] TCP: Hash tables configured (established 4096 bind 4096)
[    0.111840] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.111853] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.111916] NET: Registered protocol family 1
[    0.111933] PCI: CLS 0 bytes, default 64
[    0.112260] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.114167] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.114174] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.114791] io scheduler noop registered
[    0.114797] io scheduler deadline registered (default)
[    0.115158] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[    0.115435] irq: Cannot allocate irq_descs @ IRQ45, assuming pre-allocated
[    0.115554] irq: Cannot allocate irq_descs @ IRQ77, assuming pre-allocated
[    0.115819] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[    0.115826] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    0.115830] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[    0.115835] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.115847] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[    0.115926] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[    0.115993] PCI: bus0: Fast back to back transfers disabled
[    0.115998] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.116004] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.116053] pci 0000:01:00.0: [11ab:2b40] type 00 class 0x020000
[    0.116080] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x401fffff 64bit pref]
[    0.116090] pci 0000:01:00.0: reg 0x18: [mem 0x40200000-0x402fffff 64bit pref]
[    0.116139] pci 0000:01:00.0: supports D1 D2
[    0.116143] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.116197] PCI: bus1: Fast back to back transfers disabled
[    0.116203] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.116257] pci 0000:02:00.0: [11ab:2b40] type 00 class 0x020000
[    0.116291] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x421fffff 64bit pref]
[    0.116303] pci 0000:02:00.0: reg 0x18: [mem 0x42200000-0x422fffff 64bit pref]
[    0.116369] pci 0000:02:00.0: supports D1 D2
[    0.116372] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.116432] PCI: bus2: Fast back to back transfers disabled
[    0.116436] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    0.116479] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
[    0.116484] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
[    0.116491] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.116499] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[    0.116507] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.116512] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe02fffff]
[    0.116518] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
[    0.116527] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
[    0.116535] pci 0000:00:02.0: PCI bridge to [bus 02]
[    0.116539] pci 0000:00:02.0:   bridge window [mem 0xe0400000-0xe06fffff]
[    0.116624] mv_xor f1060800.xor: Marvell shared XOR driver
[    0.151584] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    0.151665] mv_xor f1060900.xor: Marvell shared XOR driver
[    0.191565] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    0.191698] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.211987] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A
[    0.212293] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    0.212300] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    0.212886] scsi host0: ahci-mvebu
[    0.213014] scsi host1: ahci-mvebu
[    0.213091] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[    0.213095] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[    0.213437] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
[    0.213768] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[    0.213772] nand: AMD/Spansion S34ML02G2
[    0.213776] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[    0.213782] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048
[    0.213969] Bad block table found at page 131008, version 0x01
[    0.214303] Bad block table found at page 130944, version 0x01
[    0.214559] 10 ofpart partitions found on MTD device pxa3xx_nand-0
[    0.214563] Creating 10 MTD partitions on "pxa3xx_nand-0":
[    0.214567] 0x000000000000-0x000000200000 : "u-boot"
[    0.214846] 0x000000200000-0x000000220000 : "u_env"
[    0.215117] 0x000000220000-0x000000260000 : "s_env"
[    0.215342] 0x000000260000-0x000000820000 : "unused_area"
[    0.215575] 0x0000007e0000-0x000000820000 : "devinfo"
[    0.215808] 0x000000900000-0x000008400000 : "kernel1"
[    0.216088] 0x000000c00000-0x000008400000 : "rootfs1"
[    0.216355] 0x000008400000-0x00000ff00000 : "kernel2"
[    0.216677] 0x000008700000-0x00000ff00000 : "ubi"
[    0.216960] 0x00000ff00000-0x000010000000 : "BBT"
[    0.217562] libphy: Fixed MDIO Bus: probed
[    0.217647] libphy: orion_mdio_bus: probed
[    0.217774] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[    0.219357] mvneta f1034000.ethernet eth0: Using hardware mac address 60:38:e0:00:00:00
[    0.220564] mvneta f1070000.ethernet eth1: Using hardware mac address 60:38:e0:00:00:00
[    0.220613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.220618] ehci-pci: EHCI PCI platform driver
[    0.220646] ehci-platform: EHCI generic platform driver
[    0.220723] ehci-orion: EHCI orion driver
[    0.220790] orion-ehci f1058000.usb: EHCI Host Controller
[    0.220802] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    0.220857] orion-ehci f1058000.usb: irq 36, io mem 0xf1058000
[    0.231210] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    0.231435] hub 1-0:1.0: USB hub found
[    0.231449] hub 1-0:1.0: 1 port detected
[    0.231769] usbcore: registered new interface driver usb-storage
[    0.231893] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
[    0.232004] i2c /dev entries driver
[    0.243438] orion_wdt: Initial timeout 171 sec
[    0.246513] marvell-cesa f1090000.crypto: CESA device successfully registered
[    0.246963] NET: Registered protocol family 10
[    0.247353] NET: Registered protocol family 17
[    0.247371] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    0.247376] 8021q: 802.1Q VLAN Support v1.8
[    0.247417] Registering SWP/SWPB emulation handler
[    0.248126] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    0.248140] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[    0.248233] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[    0.248253] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[    0.248501] hub 2-0:1.0: USB hub found
[    0.248528] hub 2-0:1.0: 1 port detected
[    0.248606] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    0.248614] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[    0.248642] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.248821] hub 3-0:1.0: USB hub found
[    0.248847] hub 3-0:1.0: 1 port detected
[    0.249166] UBI: auto-attach mtd8
[    0.249171] ubi0: attaching mtd8
[    0.561208] ata2: SATA link down (SStatus 0 SControl 300)
[    0.561233] ata1: SATA link down (SStatus 0 SControl 300)
[    0.569363] ubi0: scanning is finished
[    0.573855] ubi0: attached mtd8 (name "ubi", size 120 MiB)
[    0.573859] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    0.573862] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    0.573865] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    0.573868] ubi0: good PEBs: 960, bad PEBs: 0, corrupted PEBs: 0
[    0.573871] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[    0.573874] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1718014600
[    0.573877] ubi0: available PEBs: 0, total reserved PEBs: 960, PEBs reserved for bad PEB handling: 40
[    0.573894] ubi0: background thread "ubi_bgt0d" started, PID 552
[    0.574312] block ubiblock0_0: created from ubi0:0(rootfs)
[    0.574316] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[    0.574509] mvsw61xx 10.mvsw61xx: Found MV88E6352 at f1072004.mdio-mi:10
[    0.574513] mvsw61xx 10.mvsw61xx: Using direct addressing
[    0.574559] armada38x-rtc f10a3800.rtc: setting system clock to 2097-08-03 20:21:52 UTC (4026399712)
[    0.575125] Warning: unable to open an initial console.
[    0.576669] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[    0.576785] Freeing unused kernel memory: 256K (c0588000 - c05c8000)
[    0.616007] random: nonblocking pool is initialized
[    0.670290] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
[    0.688802] usb-storage 3-1:1.0: USB Mass Storage device detected
[    0.688907] scsi host2: usb-storage 3-1:1.0
[    0.800612] init: Console is alive
[    0.800666] init: - watchdog -
[    1.116083] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.116333] ohci-platform: OHCI generic platform driver
[    1.116763] uhci_hcd: USB Universal Host Controller Interface driver
[    1.122810] init: - preinit -
[    1.237912] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 638
[    1.258896] UBIFS (ubi0:1): recovery needed
[    1.321032] UBIFS (ubi0:1): recovery completed
[    1.321064] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[    1.321068] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.321073] UBIFS (ubi0:1): FS size: 106151936 bytes (101 MiB, 836 LEBs), journal size 5332992 bytes (5 MiB, 42 LEBs)
[    1.321076] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[    1.321081] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID F486C5A8-F37B-4B9F-83CF-0745E287681B, small LPT model
[    1.324917] mount_root: switching to jffs2 overlay
[    1.333188] procd: - early -
[    1.333213] procd: - watchdog -
[    1.869976] scsi 2:0:0:0: Direct-Access     Seagate  BUP Slim BK      0143 PQ: 0 ANSI: 6
[    1.870797] sd 2:0:0:0: [sda] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.871338] sd 2:0:0:0: [sda] Write Protect is off
[    1.871345] sd 2:0:0:0: [sda] Mode Sense: 2b 00 10 08
[    1.871881] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    1.879878]  sda: sda1
[    1.881569] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.381756] procd: failed to set stdio
[    2.381773] procd: - ubus -
[    2.434283] procd: - init -
[    2.951813] NET: Registered protocol family 8
[    2.951820] NET: Registered protocol family 20
[    2.953842] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[    2.955387] tun: Universal TUN/TAP device driver, 1.6
[    2.955392] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.956770] gre: GRE over IPv4 demultiplexor driver
[    2.957099] ip_gre: GRE over IPv4 tunneling driver
[    2.958481] PPP generic driver version 2.4.2
[    2.959537] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.966016] u32 classifier
[    2.966021]     input device check on
[    2.966023]     Actions configured
[    2.966401] Mirror/redirect action on
[    2.967828] nf_conntrack version 0.5.0 (8022 buckets, 32088 max)
[    2.974514] fuse init (API version 7.23)
[    3.039683] pci 0000:00:01.0: enabling device (0140 -> 0142)
[    3.046461] wlprobe  wlpptr->ioBase0 = e3580000
[    3.046482] wlprobe  wlpptr->ioBase1 = e3800000
[    3.046617] wlInit wlpptr->pCmdBuf = dca94000  wlpptr->wlpd_p->pPhysCmdBuf = 1ca94000
[    3.061091] Physical loc =0x17790000
[    3.061114] mrvl pri mailbox Physical loc =0x0x1779f000
[    3.061123] fw file: /lib/firmware/wlan-v9_8964/W8964.bin
[    3.061128] read img file...
[    3.260496] FW len = 449468
[    3.261506] fw download start 88
[    3.261509] init ddr...
[    3.398968] FwSize = 449468 downloaded Size = 449468 currIteration 65522
[    3.654151] 0;0;0;0;0;0;0;0;0;0;0;wlFwDownload complete
[    6.267007] wlFwGetHwSpecs pCmd = dca94000
[    6.267129] Mac address = 60:38:e0:00:00:00
[    6.267131] Mac_Init
[    6.277206] wlFwSetHwSpecs ...
[    6.277215]   -->pPhysTxRing     = 0x1b430000
[    6.277218]   -->pPhysTxDoneRing = 0x1e22a000
[    6.277220]   -->pPhysRxRing     = 0x1b460000
[    6.277221]   -->pPhysRxDoneRing = 0x1b480000
[    6.277223]   -->pPhysAcntRing   = 0x1b440000
[    6.277226]   -->num tx desc 2048 num rx desc 16384
[    6.307622] [wlInit_monif] wlinitcnt=0, vmacIndex=17
[    6.307899] pci 0000:00:02.0: enabling device (0140 -> 0142)
[    6.316303] wlprobe  wlpptr->ioBase0 = e3980000
[    6.316325] wlprobe  wlpptr->ioBase1 = e3c00000
[    6.316477] wlInit wlpptr->pCmdBuf = d6b10000  wlpptr->wlpd_p->pPhysCmdBuf = 16b10000
[    6.331009] Physical loc =0x12680000
[    6.331032] mrvl pri mailbox Physical loc =0x0x1268f000
[    6.331036] fw file: /lib/firmware/wlan-v9_8964/W8964.bin
[    6.331039] read img file...
[    6.525168] FW len = 449468
[    6.526178] fw download start 88
[    6.526183] init ddr...
[    6.667201] FwSize = 449468 downloaded Size = 449468 currIteration 65527
[    6.922575] 0;0;0;0;wlFwDownload complete
[    7.859859] wlFwGetHwSpecs pCmd = d6b10000
[    7.859985] Mac address = 60:38:e0:00:00:00
[    7.859987] Mac_Init
[    7.870191] wlFwSetHwSpecs ...
[    7.870199]   -->pPhysTxRing     = 0x16b20000
[    7.870202]   -->pPhysTxDoneRing = 0x16b0e000
[    7.870204]   -->pPhysRxRing     = 0x16b60000
[    7.870206]   -->pPhysRxDoneRing = 0x16b80000
[    7.870208]   -->pPhysAcntRing   = 0x16b30000
[    7.870210]   -->num tx desc 2048 num rx desc 16384
[    7.901321] [wlInit_monif] wlinitcnt=1, vmacIndex=17
[    7.904474] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.953385] nf_conntrack_rtsp v0.7 loading
[    8.092700] nf_nat_rtsp v0.7 loading
[    8.094478] PPP MPPE Compression module registered
[    8.095240] NET: Registered protocol family 24
[    8.095686] PPTP driver version 0.8.5
[    8.096673] usbcore: registered new interface driver ums-alauda
[    8.096898] usbcore: registered new interface driver ums-cypress
[    8.097163] usbcore: registered new interface driver ums-datafab
[    8.097396] usbcore: registered new interface driver ums-freecom
[    8.097663] usbcore: registered new interface driver ums-isd200
[    8.098017] usbcore: registered new interface driver ums-jumpshot
[    8.098263] usbcore: registered new interface driver ums-karma
[    8.098621] usbcore: registered new interface driver ums-sddr09
[    8.098878] usbcore: registered new interface driver ums-sddr55
[    8.099175] usbcore: registered new interface driver ums-usbat
[    8.106411] xt_time: kernel timezone is -0000
[    9.532039] Using Device Region Code!
[    9.532049] setting rxantenna 0x0, 0xf
[    9.540081] setting txantenna 0x0, 0xf
[    9.540774] req ring: vBase=0xd1c33000  pBase=11c33000
[    9.540777] req ring: vBase=0xd6937000  pBase=16937000
[    9.540800] OffChanReqHead = c007f880
[    9.540800] OffChanReqTail = c007f884
[    9.540800] OffChanDoneHead = c007f888
[    9.540800] OffChanDoneTail = c007f88c
[    9.601799] Stop client netdev = 0
[    9.602579] setting rxantenna 0x0, 0xf
[    9.602608] setting txantenna 0x0, 0xf
[    9.611338] req ring: vBase=0xd1c33000  pBase=11c33000
[    9.611351] req ring: vBase=0xd6937000  pBase=16937000
[    9.611382] OffChanReqHead = c007f880
[    9.611382] OffChanReqTail = c007f884
[    9.611382] OffChanDoneHead = c007f888
[    9.611382] OffChanDoneTail = c007f88c
[    9.613967] Using Device Region Code!
[    9.613978] setting rxantenna 0x0, 0xf
[    9.614003] setting txantenna 0x0, 0xf
[    9.614765] req ring: vBase=0xd75cb000  pBase=175cb000
[    9.614769] req ring: vBase=0xd1d0c000  pBase=11d0c000
[    9.614795] OffChanReqHead = c007f880
[    9.614795] OffChanReqTail = c007f884
[    9.614795] OffChanDoneHead = c007f888
[    9.614795] OffChanDoneTail = c007f88c
[    9.641186] Stop client netdev = 0
[    9.641889] setting rxantenna 0x0, 0xf
[    9.649297] setting txantenna 0x0, 0xf
[    9.657324] req ring: vBase=0xd75cb000  pBase=175cb000
[    9.657327] req ring: vBase=0xd1d0c000  pBase=11d0c000
[    9.657352] OffChanReqHead = c007f880
[    9.657352] OffChanReqTail = c007f884
[    9.657352] OffChanDoneHead = c007f888
[    9.657352] OffChanDoneTail = c007f88c
[   10.461795] device eth1 entered promiscuous mode
[   10.463026] br-lan: port 1(eth1) entered forwarding state
[   10.463038] br-lan: port 1(eth1) entered forwarding state
[   10.478406] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.651837] HTB: quantum of class 1000001 is big. Consider r2q change.
[   10.788925] HTB: quantum of class 1000001 is big. Consider r2q change.
[   11.004860] Setting Region Code not supported!
[   11.022525] Setting 20/40 Coexist on
[   11.023612] bftype is 6
[   11.065563] Stop client netdev = 0
[   11.066247] setting rxantenna 0xf, 0xf
[   11.084352] setting txantenna 0x0, 0xf
[   11.115209] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0
[   11.115216] Build_IE_192 80MHz or less
[   11.115687] req ring: vBase=0xd1c33000  pBase=11c33000
[   11.115690] req ring: vBase=0xd6937000  pBase=16937000
[   11.115713] OffChanReqHead = c007f880
[   11.115713] OffChanReqTail = c007f884
[   11.115713] OffChanDoneHead = c007f888
[   11.115713] OffChanDoneTail = c007f88c
[   11.115813] WLAN(wdev0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   11.143897] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0
[   11.143904] Build_IE_192 80MHz or less
[   11.144716] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   11.441221] br-lan: port 1(eth1) entered disabled state
[   12.111248] finished scanning channel 36, traffic cnt 22289, bbu cnt 31553
[   12.341246] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   12.341822] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0
[   12.341827] Build_IE_192 80MHz or less
[   12.342523] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   12.342867] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   12.342899] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 2
[   12.389014] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   12.389507] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0
[   12.389511] Build_IE_192 80MHz or less
[   12.390346] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   12.390770] after ieee80211wRequired=0 ieee80211w=0
[   12.391337] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   12.391812] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0
[   12.391816] Build_IE_192 80MHz or less
[   12.392639] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   12.451239] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   12.451264] br-lan: port 1(eth1) entered forwarding state
[   12.451285] br-lan: port 1(eth1) entered forwarding state
[   12.471354] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   12.471378] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   12.618218] Setting Region Code not supported!
[   12.621273] finished scanning channel 40, traffic cnt 101, bbu cnt 1841
[   12.639761] Setting 20/40 Coexist on
[   12.640856] bftype is 6
[   12.676485] Stop client netdev = 0
[   12.677174] setting rxantenna 0xf, 0xf
[   12.694582] setting txantenna 0x0, 0xf
[   12.721753] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0
[   12.721757] Build_IE_192 80MHz or less
[   12.722217] req ring: vBase=0xd75cb000  pBase=175cb000
[   12.722219] req ring: vBase=0xd1d0c000  pBase=11d0c000
[   12.722244] OffChanReqHead = c007f880
[   12.722244] OffChanReqTail = c007f884
[   12.722244] OffChanDoneHead = c007f888
[   12.722244] OffChanDoneTail = c007f88c
[   12.722368] WLAN(wdev1): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   12.748746] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0
[   12.748753] Build_IE_192 80MHz or less
[   12.749578] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=1 WLANID=0
[   13.131251] finished scanning channel 44, traffic cnt 28826, bbu cnt 39088
[   13.641247] finished scanning channel 48, traffic cnt 1924, bbu cnt 6069
[   13.721340] finished scanning channel 1, traffic cnt 19008, bbu cnt 208033
[   13.901291] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   13.901905] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0
[   13.901910] Build_IE_192 80MHz or less
[   13.902801] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   13.903179] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   13.903199] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 2
[   13.950227] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   13.950734] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0
[   13.950738] Build_IE_192 80MHz or less
[   13.951602] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   13.952070] after ieee80211wRequired=0 ieee80211w=0
[   13.952590] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   13.953070] ptr->ch_width=1,ptr->center_freq0=42,ptr->center_freq1=0
[   13.953074] Build_IE_192 80MHz or less
[   13.953898] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   14.071272] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   14.071819] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0
[   14.071824] Build_IE_192 80MHz or less
[   14.072516] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=1 WLANID=0
[   14.072669] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   14.072704] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 2
[   14.119354] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   14.119835] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0
[   14.119839] Build_IE_192 80MHz or less
[   14.120665] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=1 WLANID=0
[   14.121125] after ieee80211wRequired=0 ieee80211w=0
[   14.121866] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   14.122339] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0
[   14.122344] Build_IE_192 80MHz or less
[   14.123140] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=1 WLANID=0
[   14.141249] finished scanning channel 149, traffic cnt 17156, bbu cnt 19385
[   14.221273] finished scanning channel 2, traffic cnt 8090, bbu cnt 99495
[   14.451294] br-lan: port 1(eth1) entered forwarding state
[   14.651266] finished scanning channel 153, traffic cnt 4660, bbu cnt 6267
[   14.721280] finished scanning channel 3, traffic cnt 3460, bbu cnt 64587
[   15.043212] HTB: quantum of class 1000001 is big. Consider r2q change.
[   15.161268] finished scanning channel 157, traffic cnt 6460, bbu cnt 10559
[   15.221273] finished scanning channel 4, traffic cnt 4172, bbu cnt 70997
[   15.671264] finished scanning channel 161, traffic cnt 368, bbu cnt 1783
[   15.721278] finished scanning channel 5, traffic cnt 9234, bbu cnt 96581
[   16.171262] Stop client netdev = 0
[   16.171279] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   16.172272] setting rxantenna 0xf, 0xf
[   16.192961] setting txantenna 0x0, 0xf
[   16.229807] finished scanning channel 6, traffic cnt 20726, bbu cnt 163614
[   16.237036] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0
[   16.237040] Build_IE_192 80MHz or less
[   16.237529] req ring: vBase=0xd1c33000  pBase=11c33000
[   16.237534] req ring: vBase=0xd6937000  pBase=16937000
[   16.237559] OffChanReqHead = c007f880
[   16.237559] OffChanReqTail = c007f884
[   16.237559] OffChanDoneHead = c007f888
[   16.237559] OffChanDoneTail = c007f88c
[   16.237829] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0
[   16.237833] Build_IE_192 80MHz or less
[   16.238770] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   16.731262] finished scanning channel 7, traffic cnt 4433, bbu cnt 72738
[   17.231264] finished scanning channel 8, traffic cnt 7803, bbu cnt 201845
[   17.731259] finished scanning channel 9, traffic cnt 705, bbu cnt 55527
[   18.231258] finished scanning channel 10, traffic cnt 5245, bbu cnt 143547
[   18.731258] finished scanning channel 11, traffic cnt 20492, bbu cnt 162907
[   19.231291] Stop client netdev = 0
[   19.231304] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   19.232318] setting rxantenna 0xf, 0xf
[   19.250007] setting txantenna 0x0, 0xf
[   19.284465] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0
[   19.284470] Build_IE_192 80MHz or less
[   19.284929] req ring: vBase=0xd75cb000  pBase=175cb000
[   19.284932] req ring: vBase=0xd1d0c000  pBase=11d0c000
[   19.284958] OffChanReqHead = c007f880
[   19.284958] OffChanReqTail = c007f884
[   19.284958] OffChanDoneHead = c007f888
[   19.284958] OffChanDoneTail = c007f88c
[   19.285261] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0
[   19.285265] Build_IE_192 80MHz or less
[   19.286133] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=1 WLANID=0
[   22.430981] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   22.600232] Setting Region Code not supported!
[   22.611143] Setting 20/40 Coexist on
[   22.612409] bftype is 6
[   22.647816] Stop client netdev = 0
[   22.648498] setting rxantenna 0xf, 0xf
[   22.666417] setting txantenna 0x0, 0xf
[   22.694668] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0
[   22.694672] Build_IE_192 80MHz or less
[   22.695115] req ring: vBase=0xd1c33000  pBase=11c33000
[   22.695118] req ring: vBase=0xd6937000  pBase=16937000
[   22.695141] OffChanReqHead = c007f880
[   22.695141] OffChanReqTail = c007f884
[   22.695141] OffChanDoneHead = c007f888
[   22.695141] OffChanDoneTail = c007f88c
[   22.695242] WLAN(wdev0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   22.723511] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0
[   22.723520] Build_IE_192 80MHz or less
[   22.724265] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   23.691270] finished scanning channel 36, traffic cnt 9086, bbu cnt 12991
[   23.821237] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   23.821793] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0
[   23.821798] Build_IE_192 80MHz or less
[   23.822478] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   23.822834] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   23.822871] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 2
[   23.868933] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   23.869424] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0
[   23.869428] Build_IE_192 80MHz or less
[   23.870257] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   23.870695] after ieee80211wRequired=0 ieee80211w=0
[   23.871315] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   23.871792] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0
[   23.871796] Build_IE_192 80MHz or less
[   23.872616] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   23.887304] device wdev0ap0 entered promiscuous mode
[   23.887334] br-lan: port 2(wdev0ap0) entered forwarding state
[   23.887347] br-lan: port 2(wdev0ap0) entered forwarding state
[   23.992696] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   24.072614] after ieee80211wRequired=0 ieee80211w=0
[   24.170378] Setting Region Code not supported!
[   24.181890] Setting 20/40 Coexist on
[   24.183065] bftype is 6
[   24.201269] finished scanning channel 40, traffic cnt 14, bbu cnt 3389
[   24.229240] Stop client netdev = 0
[   24.229925] setting rxantenna 0xf, 0xf
[   24.247798] setting txantenna 0x0, 0xf
[   24.274520] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0
[   24.274523] Build_IE_192 80MHz or less
[   24.274989] req ring: vBase=0xd75cb000  pBase=175cb000
[   24.274991] req ring: vBase=0xd1d0c000  pBase=11d0c000
[   24.275018] OffChanReqHead = c007f880
[   24.275018] OffChanReqTail = c007f884
[   24.275018] OffChanDoneHead = c007f888
[   24.275018] OffChanDoneTail = c007f88c
[   24.275143] WLAN(wdev1): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   24.302120] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0
[   24.302128] Build_IE_192 80MHz or less
[   24.302819] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=1 WLANID=0
[   24.711257] finished scanning channel 44, traffic cnt 38533, bbu cnt 52742
[   25.221250] finished scanning channel 48, traffic cnt 1602, bbu cnt 8389
[   25.271256] finished scanning channel 1, traffic cnt 22959, bbu cnt 208989
[   25.491245] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   25.491795] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0
[   25.491800] Build_IE_192 80MHz or less
[   25.492691] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   25.493147] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   25.493280] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 2
[   25.540409] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   25.540902] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0
[   25.540906] Build_IE_192 80MHz or less
[   25.541761] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   25.542376] after ieee80211wRequired=0 ieee80211w=0
[   25.542921] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   25.543398] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0
[   25.543402] Build_IE_192 80MHz or less
[   25.544214] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   25.559234] device wdev1ap0 entered promiscuous mode
[   25.559266] br-lan: port 3(wdev1ap0) entered forwarding state
[   25.559280] br-lan: port 3(wdev1ap0) entered forwarding state
[   25.711263] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   25.711817] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0
[   25.711821] Build_IE_192 80MHz or less
[   25.712506] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=1 WLANID=0
[   25.712645] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   25.712664] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 2
[   25.721279] finished scanning channel 149, traffic cnt 17341, bbu cnt 21140
[   25.771261] finished scanning channel 2, traffic cnt 11354, bbu cnt 118754
[   25.778976] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   25.779520] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0
[   25.779524] Build_IE_192 80MHz or less
[   25.780397] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=1 WLANID=0
[   25.780879] after ieee80211wRequired=0 ieee80211w=0
[   25.781484] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   25.781990] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0
[   25.781994] Build_IE_192 80MHz or less
[   25.782818] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=1 WLANID=0
[   25.881199] br-lan: port 2(wdev0ap0) entered forwarding state
[   26.231248] finished scanning channel 153, traffic cnt 4595, bbu cnt 6180
[   26.271254] finished scanning channel 3, traffic cnt 1135, bbu cnt 28348
[   26.741262] finished scanning channel 157, traffic cnt 4086, bbu cnt 5885
[   26.771264] finished scanning channel 4, traffic cnt 5432, bbu cnt 91891
[   27.251249] finished scanning channel 161, traffic cnt 54, bbu cnt 684
[   27.271254] finished scanning channel 5, traffic cnt 7544, bbu cnt 98046
[   27.551200] br-lan: port 3(wdev1ap0) entered forwarding state
[   27.751233] Stop client netdev = 0
[   27.751246] WLAN(wdev0ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   27.752254] setting rxantenna 0xf, 0xf
[   27.771257] finished scanning channel 6, traffic cnt 23737, bbu cnt 217021
[   27.772965] setting txantenna 0x0, 0xf
[   27.808871] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0
[   27.808876] Build_IE_192 80MHz or less
[   27.809324] req ring: vBase=0xd1c33000  pBase=11c33000
[   27.809327] req ring: vBase=0xd6937000  pBase=16937000
[   27.809349] OffChanReqHead = c007f880
[   27.809349] OffChanReqTail = c007f884
[   27.809349] OffChanDoneHead = c007f888
[   27.809349] OffChanDoneTail = c007f88c
[   27.809618] ptr->ch_width=1,ptr->center_freq0=155,ptr->center_freq1=0
[   27.809621] Build_IE_192 80MHz or less
[   27.810501] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=0 WLANID=0
[   28.271257] finished scanning channel 7, traffic cnt 11223, bbu cnt 128653
[   28.771257] finished scanning channel 8, traffic cnt 656, bbu cnt 63469
[   29.271254] finished scanning channel 9, traffic cnt 1117, bbu cnt 34704
[   29.771257] finished scanning channel 10, traffic cnt 8027, bbu cnt 138392
[   30.271256] finished scanning channel 11, traffic cnt 20026, bbu cnt 152402
[   30.771239] Stop client netdev = 0
[   30.771252] WLAN(wdev1ap0): MLME - Disconnecting (deauth) wireless client: ffffffffffff Reason 3
[   30.772270] setting rxantenna 0xf, 0xf
[   30.789952] setting txantenna 0x0, 0xf
[   30.823802] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0
[   30.823809] Build_IE_192 80MHz or less
[   30.824278] req ring: vBase=0xd75cb000  pBase=175cb000
[   30.824280] req ring: vBase=0xd1d0c000  pBase=11d0c000
[   30.824307] OffChanReqHead = c007f880
[   30.824307] OffChanReqTail = c007f884
[   30.824307] OffChanDoneHead = c007f888
[   30.824307] OffChanDoneTail = c007f88c
[   30.824615] ptr->ch_width=0,ptr->center_freq0=0,ptr->center_freq1=0
[   30.824619] Build_IE_192 80MHz or less
[   30.825491] WTP_nable=0  macmode=0 tunnel_mode=0 RFID=1 WLANID=0

Wikis[edit]

WRT32X - Marvell Armada 385 @1.8GHz (Venom)

Third party firmware information[edit]

Reviews[edit]

News[edit]

CPU Marvell ARMADA 38x @1.8GHz Dual-Core ARM (Cortex A9)
256MB Flash and 512MB of DDR3 Memory
Duai-Band AC3200 (N600 + AC2600) 3x3 radio (2.4/5GHz)
Tri-Stream 160 radio belong to the Marvell Avastar 88W8964
4x high-performance antennas and high-powered PAs for better range
5-port SOHO-grade Gigabit Ethernet switch with TCAM (1x WAN, 4x LAN)
USB 3.0, USB 2.0 and eSATA ports for NAS-like network storage
MU-MIMO Technology for Airtime efficiency, QoS engine powered by Killer Networking
Exclusive optimization for Killer Networking gaming clients in MSI, Alienware, Razer
DFS certified for operation in the clear DFS channel airspace
Custom-built firmware specially tuned for online gaming traffic

See also[edit]

List of Four Stream Hardware

Images[edit]