See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Linksys WRT3200ACM

From WikiDevi
Jump to: navigation, search

Linksys WRT3200AC M v1
Availability: now

Manuf/OEM/ODM Wistron NeWeb

FCC approval date: 21 September 2016
(Est.) release date: 18 May 2016
(Est.) initial retail price (in USD): $249.99
Country of manuf.: China
Series: AC3200

Amazon image

ASINs
B01JOXW3YE (Flag of the United States.svg, On Amazon, On CCC)
B06Y5W188F (Flag of the United States.svg, On Amazon, On CCC)
On Newegg

Type: wireless router

FCC ID: Q87-WRT3200ACM
Industry Canada ID: 3839A-WRT3200ACM
PCB ID: 48SAM203.SGD

Power: 12 VDC, 3 A
Connector type: barrel

CPU1: Marvell 88F6820 (1.8 GHz, 2 cores)
FLA1: 256 MiB
268,435,456 B
2,097,152 Kib
262,144 KiB
2,048 Mib
0.25 GiB
(Spansion S34ML02G2)
FLA2: 32 MiB
33,554,432 B
262,144 Kib
32,768 KiB
256 Mib
0.0313 GiB
(Winbond SPI × 2)
RAM1: 512 MiB
536,870,912 B
4,194,304 Kib
524,288 KiB
4,096 Mib
0.5 GiB
(Micron DDR3 × 2)
RAM2: 256 MiB
268,435,456 B
2,097,152 Kib
262,144 KiB
2,048 Mib
0.25 GiB
(Micron DDR3 × 2)

Expansion IFs: USB 3.0, USB 2.0 / eSATA (combo port)
USB ports: 2
SATA ports: 1
JTAG: yes, 20-pad header
Serial: yes, 6-pin header

WI1 chip1: Marvell 88W8964
WI1 chip2: Marvell 88W8887
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 4x4:3
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Marvell 88W8964
WI2 802dot11 protocols: bgn
WI2 MIMO config: 4x4:3
WI2 antenna connector: U.FL, RP-SMA

ETH chip1: Marvell 88F6820
Switch: Marvell 88E6352
LAN speed: 10/100/1000
LAN ports: 4
WAN speed: 10/100/1000
WAN ports: 1

abgn+ac

Additional chips
2.4GHz Front End Module;Skyworks;SKY85309-11;;4;
5GHz Front End Module;Skyworks;SKY85728-11;;4;

Stock bootloader: U-Boot

Stock FW OS: Linux 3.10.70

Third party firmware supported: DD-WRT • (List), OpenWrt, LEDE Project • (List), McDebian

Flags: Wave2, MU-MIMO, VHT160, AP3200, DFS

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1066 additional devices
of which 140 are Linksys devices

802dot11 OUI: 60:38:E0 (1 E, 2 W, 2016)
Ethernet OUI: 60:38:E0 (1 E, 2 W, 2016)

 FCC ID
Linksys WRT32XQ87-WRT3200ACM
For a list of all currently documented Marvell chipsets with specifications, see Marvell.


2600 Mbps - 3-stream 802.11ac device (160MHz bandwidth, 867Mbps/stream),
600 Mbps - max. PHY rate for the 40MHz wide 2.4GHz channel = 3200 Mbps class

AC3200 MU-MIMO Gigabit Wi-Fi Router

Product page  • Support page  • (Template link outdated)
DoC download

"48SAM203.SGD" and "2016.05.18" is silkscreened on the board.

Specifications[edit]

or Marvell 88F6925 @1.86GHz (Armada 395) (PR ??)
  • Flash: AMD / Spansion 256MB (NAND), RAM: 512MB (DDR3)
  • WLAN: 2x Marvell 88W8964 4T4R 802.11abgn/ac (MU-MIMO)
1x Marvell 88W8887 1T1R 802.11ac, BT 4.2, NFC, FM rec
Uses a 12V / 3A power adapter

Wikis[edit]

WRT3200ACM - Marvell Armada 385 @1.8GHz (Rango)
WRT1900ACS - Marvell Armada 385 @1.6GHz (Shelby)
WRT1900AC v2 - Marvell Armada 385 @1.3GHz (Cobra)
WRT1900AC v1 - Marvell MV78230 @1.2GHz (Mamba)
WRT1200AC - Marvell Armada 385 @1.3GHz (Caiman)

Reviews[edit]

• CPU: Marvell 88F6820-A0 C180 @1.8GHz (Armada 385 ARMv7)
• 2.4GHz Radio: Marvell 88W8964-BTW2 WiSoC (MU-MIMO)
4x Skyworks SKY85309-11 2.4GHz Front End Module
Micron 128MB DDR3 RAM
• 5GHz Radio: Marvell 88W8964-BTW2 WiSoC (MU-MIMO)
Marvell 88W8887-NAA2 DFS monitor (WLAN/BT/NFC/FM)
4x Skyworks SKY85728-11 5GHz Front End Module
Micron 128MB DDR3 RAM
• Switch: Marvell 88E6352 GbE Switch

Forum threads[edit]

Serial[edit]

Boot log >> •
BootROM - 1.73
Booting from NAND flash

General initialization - Version: 1.0.0
AVS selection from EFUSE disabled (Skip reading EFUSE values)
mvSysEnvIsFlavourReduced: TWSI Read of 'flavor' failed
Detected Device ID 6820
High speed PHY - Version: 2.0

Init RD NAS topology Serdes Lane 3 is USB3
Serdes Lane 4 is SGMII
board SerDes lanes topology details:
| Lane # | Speed|    Type     |
------------------------------|
|   0    |  6   |  SATA0      |
|   1    |  5   |  PCIe0      |
|   2    |  6   |  SATA1      |
|   3    |  5   |  USB3 HOST1 |
|   4    |  5   |  PCIe1      |
|   5    |  0   |  SGMII2     |
-------------------------------
:** Link is Gen1, check the EP capability
PCIe, Idx 0: Link upgraded to Gen2 based on client cpabilities
:** Link is Gen1, check the EP capability
PCIe, Idx 1: remains Gen1
High speed PHY - Ended Successfully
DDR3 Training Sequence - Ver TIP-1.46.0
mvSysEnvGetTopologyUpdateInfo: TWSI Read failed
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
Not detected suspend to RAM indication
BootROM: Image checksum verification PASSED
__   __                      _ _
|  \/  | __ _ _ ____   _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| |  | | (_| | |   \ V /  __/ | |
|_|  |_|\__,_|_|    \_/ \___|_|_|
         _   _     ____              _
        | | | |   | __ )  ___   ___ | |_
        | | | |___|  _ \ / _ \ / _ \| __|
        | |_| |___| |_) | (_) | (_) | |_
         \___/    |____/ \___/ \___/ \__|

** LOADER **
U-Boot 2013.01 (Apr 08 2016 - 15:47:50) Marvell version: 2015_T1.QA.0p16
Boot version : v0.0.4

Board: RD-NAS-88F6820-DDR3
SoC:   MV88F6820 Rev A0
       running 2 CPUs
CPU:   ARM Cortex A9 MPCore (Rev 1) LE
       CPU 0
       CPU    @ 1866 [MHz]
       L2     @ 933 [MHz]
       TClock @ 200 [MHz]
       DDR3    @ 933 [MHz]
       DDR3 32 Bit Width,FastPath Memory Access, DLB Enabled, ECC Disabled
DRAM:  512 MiB
NAND:  256 MiB
MMC:   mv_sdh: 0
DEVINFO offset == 0x7e0000
U-ENV offset == 0x200000
U-ENV offset == 0x200000
S-ENV offset == 0x220000

#### auto_recovery ####
[u_env] get auto_recovery == yes
[u_env] get auto_recovery == yes
[u_env] get boot_part == 1
[u_env] get boot_part_ready == 3
auto_recovery enabled:1, boot_part:1, boot_part_ready:3

S-ENV offset == 0x220000
[boot_count_read] block:0x220000, size:128KB, records:64
[boot_count_read_record] boot_count:2, next_record:9
[boot_count_write] erase:0, auto_recovery->
block_offset:0x220000 offset=0x224800

Updating boot_count ...
[boot_count_write] offset:0x224800 , length:2048
done

PCI-e 0 (IF 0 - bus 0) Root Complex Interface, Detected Link X1, GEN 2.0
PCI-e 1 (IF 1 - bus 1) Root Complex Interface, Detected Link X1, GEN 1.1
USB2.0 0: Host Mode
USB3.0 1: Host Mode
USB3.0 0: Host Mode

Map:   Code:                    0x1feab000:0x1ff75a20
       BSS:                     0x1ffef164
       Stack:                   0x1f9aaf20
       Heap:                    0x1f9ab000:0x1feab000
U-ENV offset == 0x200000
U-ENV offset == 0x200000
       U-Boot Environment:      0x00200000:0x00220000 (NAND)

Board configuration detected:
mvEthE6171SwitchBasicInit init
Net:
|  port  | Interface | PHY address  |
|--------|-----------|--------------|
| egiga0 |   RGMII   |     0x01     |
| egiga1 |   SGMII   |     0x00     |
| egiga2 |   SGMII   |   In-Band    |
egiga0 [PRIME], egiga1, egiga2
auto_recovery_check changes bootcmd: run nandboot
Hit any key to stop autoboot:  0

NAND read: device 0 offset 0xa00000, size 0x600000
6291456 bytes read: OK
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linksys WRT3200 Router
   Created:      2016-08-26   0:55:45 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4659771 Bytes = 4.4 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.10.70 (root@build-vm) (gcc version 4.6.4 (Linaro GCC 
branch-4.6.4. Marvell GCC Dev 201310-2126.3d181f66 64K MAXPAGESIZE ALIGN) )
 #1 SMP Thu Aug 25 17:55:29 PDT 2016
CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Marvell Armada 380/381/382/383/384/385/388 (Device Tree), 
model: Marvell Armada 385 Development Board
bootconsole [earlycon0] enabled
Memory policy: ECC disabled, Data cache writealloc
PERCPU: Embedded 7 pages/cpu @c1162000 s7488 r8192 d12992 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6 ro rootdelay=1 
rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,128K(u_env),
256K(s_env),256K@8064K(devinfo),1920K@8320K(sysdiag),80m@10m(kernel),74m@16m
(rootfs),80m@90m(alt_kernel),74m@96m(alt_rootfs),160m@10m(ubifs),-@170m(syscfg)
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 1048576 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 512MB = 512MB total
Memory: 508716k/508716k available, 15572k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xe0800000 - 0xfff00000   ( 503 MB)
    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc084ccd4   (8468 kB)
      .init : 0xc084d000 - 0xc088ed40   ( 264 kB)
      .data : 0xc0890000 - 0xc08e4260   ( 337 kB)
       .bss : 0xc08e4260 - 0xc09ab18c   ( 796 kB)
Hierarchical RCU implementation.
        RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
NR_IRQS:16 nr_irqs:16 16
  LSP version: linux-3.10.70-2015_T1.1p7

sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x410054c9, AUX_CTRL 0x16070000, Cache size: 1048576 B
Console: colour dummy device 80x30
Calibrating delay loop... 3726.54 BogoMIPS (lpj=18632704)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Calibrating local timer... 933.29MHz.
Setting up static identity map for 0xc064cc58 - 0xc064ccb0
mvebu-pmsu: Initializing Power Management Service Unit
Initializing CPU Reset module
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (7453.08 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
xor: measuring software checksum speed
   arm4regs  :  3309.200 MB/sec
   8regs     :  2234.400 MB/sec
   32regs    :  1905.600 MB/sec
xor: using function: arm4regs (3309.200 MB/sec)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
irq: Cannot allocate irq_descs @ IRQ195, assuming pre-allocated
irq: Cannot allocate irq_descs @ IRQ227, assuming pre-allocated
bio: create slab <bio-0> at 0
raid6: int32x1    232 MB/s
raid6: int32x2    344 MB/s
raid6: int32x4    437 MB/s
raid6: int32x8    444 MB/s
raid6: using algorithm int32x8 (444 MB/s)
raid6: using intx1 recovery algorithm
mvebu-pcie pcie-controller.6: PCIe0.0: link up
mvebu-pcie pcie-controller.6: PCIe1.0: link up
mvebu-pcie pcie-controller.6: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
PCI: bus1: Fast back to back transfers disabled
PCI: bus2: Fast back to back transfers disabled
pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe02fffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0:   bridge window [mem 0xe0400000-0xe06fffff]
PCI: enabling device 0000:00:01.0 (0140 -> 0143)
PCI: enabling device 0000:00:02.0 (0140 -> 0143)
vgaarb: loaded

SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 
- Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switching to clocksource armada_370_xp_clocksource
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
fuse init (API version 7.22)
msgmni has been set to 993
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
mv_xor f1060800.xor: Marvell shared XOR driver
mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
mv_xor f1060800.xor: freeing 1 in use descriptors!
mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( intr crc32c )
mv_xor f1060900.xor: Marvell shared XOR driver
mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
mv_xor f1060900.xor: freeing 1 in use descriptors!
mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( intr crc32c )
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 44) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
ahci_mv f10a8000.sata: AHCI 1.0 32 slots 2 ports 6 Gbps 0x3 impl platform mode
ahci_mv f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi0 : ahci_mv_platform
scsi1 : ahci_mv_platform
ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 58
ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 58
armada-nand f10d0000.nand: 
Initialize HAL based NFC in 8bit mode with DMA Disabled using BCH 4bit ECC
NAND device: Manufacturer ID: 0x01, Chip ID: 0xda (AMD/Spansion NAND 
256MiB 3,3V 8-bit), 256MiB, page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
11 cmdlinepart partitions found on MTD device armada-nand

Creating 11 MTD partitions on "armada-nand":
0x000000000000-0x000000200000 : "uboot"
0x000000200000-0x000000220000 : "u_env"
0x000000220000-0x000000260000 : "s_env"
0x0000007e0000-0x000000820000 : "devinfo"
0x000000820000-0x000000a00000 : "sysdiag"
0x000000a00000-0x000005a00000 : "kernel"
0x000001000000-0x000005a00000 : "rootfs"
0x000005a00000-0x00000aa00000 : "alt_kernel"
0x000006000000-0x00000aa00000 : "alt_rootfs"
0x000000a00000-0x00000aa00000 : "ubifs"
0x00000aa00000-0x000010000000 : "syscfg"

bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
SoC: model = 0x6820, revision = 0x4
mvPncVirtBase = 0xe0c00000, pncTcamSize = 1024
  o 3 Giga ports supported
  o SKB recycle supported for SWF (Disabled)
  o NETA acceleration mode 4
  o BM supported for CPU: 4 BM pools
  o PnC supported (Enabled)
  o RX Queue support: 8 Queues * 256 Descriptors
  o TX Queue support: 8 Queues * 532 Descriptors
  o GSO supported
  o GRO supported
  o Receive checksum offload supported
  o Transmit checksum offload supported
  o Driver ERROR statistics enabled
  o Driver INFO statistics enabled
  o Driver DEBUG statistics enabled

port #0: is_sgmii=0, is_rgmii=1, phy_addr=0
  o Loading network interface(s) for port #0: cpu_mask=0x3, tx_csum_limit=9800

  o Port 0 is connected to Linux netdevice
    o eth0, ifindex = 3, GbE port = 0
        giga p=0: mtu=1500, mac=60:38:e0:b4:47:a0 (hw config)

port #2: is_sgmii=1, is_rgmii=0, phy_addr=1
  o Loading network interface(s) for port #2: cpu_mask=0x3, tx_csum_limit=2048

  o Port 2 is connected to Linux netdevice
    o eth1, ifindex = 4, GbE port = 2
        giga p=2: mtu=1500, mac=e2:d5:94:2f:af:12 (random)

(error) mv_switch_probe(5780) (rc=-22): read switch fdt file failed
mv_soho_switch: probe of switch.3 failed with error 1
  o Loading Switch QuarterDeck driver
    o Device ID     : 0x352
    o No. of Ports  : 7
    o CPU Port      : 5
    o Setting Switch Port #5 connected to GMAC port for 1000 Full with FC
    o Setting Switch Port #6 connected to GMAC port for 1000 Full with FC
gprtPhyIntEnable failed port 4
Switch driver init:
    o preset mode = Transparent
    o tag mode    = No Tag
port #0 establish switch connection

libphy: orion_mdio_bus: probed
mdio_bus f1072004.mdio-mi: cannot get PHY at address 0
mdio_bus f1072004.mdio-mi: cannot get PHY at address 1
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.

See also[edit]

List of Four Stream Hardware

Images[edit]