Linksys WPC600N

From WikiDevi
Jump to: navigation, search

Linksys WPC600N

Manuf/OEM/ODM Gemtek

FCC approval date: 31 July 2007
UPC: 745883573172 (UPC DB, On eBay)
Country of manuf.: Taiwan

Amazon image

ASIN
B000WMK8TE (Flag of the United States.svg, On Amazon, On CCC)

Interface: PCMCIA (32-bit)

ID: 14e4:4328 (5 addl. devices) SS: 1737:0066
Windows: PCI\VEN_14E4&DEV_4328&SUBSYS_00661737

FCC ID: Q87-WPC600NV11
Industry Canada ID: 3839A-WPC6NV11

WI1 chip1: Broadcom BCM4321

WI1 chip2: Broadcom BCM2055

Probable Linux driver
b43 (in backports) or wl
PCI ID not yet observed in any mainline kernel / this list
(see also passys)

Antenna connector: none

abgn, 2x2:2

OUI: 00:1E:E5 (11 E, 20 W, 2007), 00:21:29 (10 E, 16 W, 2007), 00:22:6B (9 E, 11 W, 2007), 00:23:69 (13 E, 19 W, 2008)

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

Dual-Band Wireless-N Notebook Adapter
Support page

WPC600N serial numbers appear to start with ANV0.

Wi-Fi Certified (alt.) (as of 03/31/2008)

[edit] lspci -nnv dump

06:00.0 Network controller [0280]: Broadcom Corporation BCM4321 802.11a/b/g/n [14e4:4328] (rev 01)
        Subsystem: Linksys WPC600N v1 802.11a/b/g/n Wireless-N CardBus Adapter [1737:0066]
        Flags: bus master, fast devsel, latency 64, IRQ 19
        Memory at f1d00000 (32-bit, non-prefetchable) [size=16K]
        Kernel driver in use: b43-pci-bridge

[edit] ssb + b43 dump

[77367.910863] ssb: Found chip with id 0x4321, rev 0x01 and package 0x01
[77367.910884] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x12, vendor 0x4243)
[77367.910895] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0B, vendor 0x4243)
[77367.910905] ssb: Core 2 found: PCI-E (cc 0x820, rev 0x02, vendor 0x4243)
[77367.910915] ssb: Core 3 found: PCI (cc 0x804, rev 0x0D, vendor 0x4243)
[77367.910935] ssb: Core 4 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243)
[77367.967057] ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0
[77367.983102] b43-phy5: Broadcom 4321 WLAN found (core revision 11)
[77368.030881] b43-phy5: Found PHY: Analog 5, Type 4 (N), Revision 1
[77368.055055] Broadcom 43xx driver loaded [ Features: PNL ]
[77368.056191] ieee80211 phy5: Selected rate control algorithm 'minstrel_ht'
[77368.271046] b43-phy5: Loading firmware version 666.2 (2011-02-23 01:15:07)
[77368.359919] b43-phy5 ERROR: Fatal DMA error: 0x00000400, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000
[77368.359923] b43-phy5 ERROR: This device does not support DMA on your system. It will now be switched to PIO.
[77368.359924] b43-phy5: Controller RESET (DMA error) ...
[77368.575165] b43-phy5: Loading firmware version 666.2 (2011-02-23 01:15:07)
[77368.643247] b43-phy5 warning: Forced PIO by use_pio module parameter. This should not be needed and will result in lower performance.
[77368.663945] b43-phy5: Controller restarted
[77368.664498] IPv6: ADDRCONF(NETDEV_UP): wlan147: link is not ready