For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Linksys E1000 v1
FCC approval date: 29 December 2009
Country of manuf.: China
Power: 12 VDC, 0.5 A
Connector type: barrel
)FLA1: 4 MiB
MX25L3205DM2I-12G)RAM1: 32 MiB
Expansion IFs: none specified
Serial: yes, 4-pin header, unpopulated, JP12, (?,8,N,1)
WI1 chip1: Broadcom BCM4716B0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Broadcom BCM4716B0
Switch: Broadcom BCM5325E
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
2.4GHz Power Amplifier IC;Skyworks;SE2528L;SiGe, 2528L, 850CM;2;
802dot11 OUI: 68:7F:74 (13 E, 16 W, 2009), C0:C1:C0 (12 E, 14 W, 2011)
Ethernet OUI: 68:7F:74 (13 E, 16 W, 2009), C0:C1:C0 (12 E, 14 W, 2011)
• Support page • (Template link outdated)
Linksys E1000 v1.0 on TechInfoDepot
"3763-01010105R" is silkscreened on the board of some / all production model units.
E1000 v1 serial numbers appear to start with CVN0.
The default SSID is CiscoXXXXX where XXXXX is the last 5 digits of the serial number. If the device has been configured with Cisco Connect the device will probably have a randomly generated SSID. A sample serial number is CVN01K6E1346.
Additional external links