See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Handlink WAP-001 rev. 2

From WikiDevi
Jump to: navigation, search

Handlink WAP-001 2

FCC approval date: 10 March 2014
Country of manuf.: Taiwan

Type: access point, in-wall access point


Power: 48 VDC, 0.15 A
Connector type: Ethernet (PoE)
Power over Ethernet (PoE) tag: 802.3af, standard

CPU1: MediaTek MT7620N
FLA1: ? MiB (Macronix Model?)
RAM1: 64 MiB
67,108,864 B
524,288 Kib
65,536 KiB
512 Mib
0.0625 GiB
(ESMT M14D5121632A-2.5B)

Expansion IFs: none specified
Serial: yes, internal, 4-pin header, 3.3V TTL

WI1 chip1: MediaTek MT7620N
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL

ETH chip1: MediaTek MT7620N
LAN speed: 100M
LAN ports: 1


Default SSID: Wireless (23 addl. devices)
Default IP address:
the IP is used by 1 additional devices
of which 1 are Handlink devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1200 additional devices
of which 2 are Handlink devices

802dot11 OUI: none specified

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

In Wall Box Access Point

"P/N: 4600001-001"<...>, "WALL AP RF BOARD", "REV : 0A0" is silkscreened on the wireless board in the FCC photos.

"P/N: 4600001-201__1__G", "WALL AP POWER BOARD", and "REV: 0B0" is silkscreened on the power / Ethernte board.

Default settings (including the SSID) are per the FCC manual. They may be inaccurate.