See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Gemtek WMIB-184GW

From WikiDevi
Jump to: navigation, search

Gemtek WMIB-184GW

FCC approval date: 22 July 2005

Interface: Mini PCIe

ID: 14e4:4311 (5 addl. devices) SS: 14e4:0465
Windows: PCI\VEN_14E4&DEV_4311&SUBSYS_046514E4


WI1 chip1: Broadcom BCM4311

WI1 chip2: Broadcom BCM2050

Antenna connector: U.FL


OUI: 00:14:A5 (4 E, 23 W, 2005)

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

lspci -nnv dump[edit]

05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
        Subsystem: Broadcom Corporation Device [14e4:0465]
        Physical Slot: 1
        Flags: bus master, fast devsel, latency 0, IRQ 19
        Memory at f1d00000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [40] Power Management version 2
        Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [d0] Express Legacy Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [13c] Virtual Channel
        Kernel driver in use: b43-pci-bridge

ssb + b43 info dump[edit]

[116887.951813] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00
[116887.951840] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
[116887.951859] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
[116887.951879] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
[116887.951899] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
[116888.015793] b43-phy35: Broadcom 4311 WLAN found (core revision 10)
[116888.059693] b43-phy35: Found PHY: Analog 4, Type 2 (G), Revision 8
[116888.083972] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[116888.084167] ieee80211 phy35: Selected rate control algorithm 'minstrel_ht'
[116888.315690] b43-phy35: Loading firmware version 666.2 (2011-02-23 01:15:07)
[116888.401593] IPv6: ADDRCONF(NETDEV_UP): wlan166: link is not ready