WikiDevi will be going offline 2019-10-31. For historical dumps of the database, see 'WikiDevi' @ the Internet Archive (MW XML, Files, Images).
Final dumps will be made available after the site goes offline.
There is no chance the data will not live on, in some form - even if it isn't 'WikiDevi' anymore. For example, see TechInfoDepot.

Freecom SilverStore

From WikiDevi
Jump to: navigation, search

Freecom SilverStore 2-Drive NAS 1.0

Manuf/OEM/ODM Brand? HNC-N2 LE

Country of manuf.: China

Amazon image

ASIN
B0060H7DHK (Flag of the United States.svg, On Amazon, On CCC)

Type: NAS enclosure

Power: 12 VDC, 4 A
Connector type: barrel

CPU1: Marvell 88F6283 (1 GHz)
FLA1: 128 MiB
134,217,728 B
1,048,576 Kib
131,072 KiB
1,024 Mib
0.125 GiB
(Samsung K9F1G08U0D)
RAM1: 128 MiB
134,217,728 B
1,048,576 Kib
131,072 KiB
1,024 Mib
0.125 GiB
(Samsung K4B1G1646G-BCH9)

Expansion IFs: USB 3.0, SATA
USB ports: 2
SATA ports: 2
Serial: yes, 4-pin header, CN4, (115200,8,N,1)

ETH chip1: Marvell 88F6283
ETH chip2: Marvell 88E1318
LAN speed: 1G
LAN ports: 1

Additional chips
USB 3.0 Controller IC;NEC;D720200F1;,,;1;
FAN Controller IC;ON Semiconductor;ADT7473;,,;1;

Stock bootloader: U-Boot 1.1.4 Marvell 3.5.9

Stock FW OS: Linux 2.6.31.8

Third party firmware supported: Debian

Flags: RTC w/ battery backup

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 738 additional devices
of which 0 are Freecom devices

Ethernet OUI: none specified

For a list of all currently documented Marvell chipsets with specifications, see Marvell.

----

General info[edit]

  • CPU: Marvell 88F6283 (ARMADA 300) @1GHz
  • Stock bootloader is locked to boot only Stock OS by checking signature.
  • MB has place for soldering second RAM IC

Serial[edit]

bootloader boot log[edit]

bootloader boot log
        __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_ 
| | | |___|  _ \ / _ \ / _ \| __| 
| |_| |___| |_) | (_) | (_) | |_ 
 \___/    |____/ \___/ \___/ \__|  ** uboot_ver:v0.0.9 **

 ** MARVELL BOARD: HNC-N2 LE 

U-Boot 1.1.4 (Nov  9 2011 - 17:49:26) Marvell version: 3.5.9
U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CFB00

Soc: 88F6282 A1CPU running @ 1000Mhz L2 running @ 333Mhz
SysClock = 400Mhz , TClock = 200Mhz 

DRAM (DDR3) CAS Latency = 6 tRP = 6 tRAS = 15 tRCD=6
DRAM CS[0] base 0x00000000   size 128MB 
DRAM Total size 128MB  16bit width
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:128 MB
Found ADT7473, program PWM1 ... OK
Flash:  0 kB

Marvell Serial ATA Adapter
Integrated Sata device found

CPU : Marvell Feroceon (Rev 1)
Scanning partition header:

Streaming disabled 
Write allocate disabled

USB 0: host mode
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
PEX 1: interface detected no Link.
Net:   egiga0 [PRIME]
Hit any key to stop autoboot:  0 

Saving Environment to NAND...
Erasing redundant Nand... 0x000c0000 0x000c0000
Writing to redundant Nand... Erasing Nand...Writing to Nand... done

bootloader environment[edit]

bootloader environment
Marvell>> printenv
baudrate=115200
loads_echo=0
ipaddr=10.4.52.165
serverip=10.4.52.7
rootpath=/srv/ubuntu
netmask=255.255.255.0
run_diag=yes
MALLOC_len=1
ethprime=egiga0
bootargs_root=root=/dev/ram0 rootfstype=cramfs init=/etc/rc.preroot initrd=0x800000,0x1000000
bootargs_end=:::DB88FXX81:eth0:none
image_name=uImage
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x2000000;
lcd0_enable=0
lcd0_params=640x480-16@60
ethaddr=00:50:43:12:29:32
ethmtu=1500
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
nandEcc=1bit
netretry=no
rcvrip=169.254.100.100
loadaddr=0x02000000
autoload=no
image_multi=yes
uboot_ver=v0.0.9
mfgtest_state=final_tested_ok
mfgmodel=HNC-N2
ethact=egiga0
stdin=serial
stdout=serial
stderr=serial
mainlineLinux=no
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
netbsd_en=no
vxworks_en=no
console=console=ttyS0,115200 mtdparts=nand_mtd:0x000a0000@0x0(uboot),0x00040000@0x000a0000(param),0x00280000@0x000e0000(preroot),
0x00380000@0x00360000(uimage),0x076e0000@0x006e0000(rootfs),0x00240000@0x07dc0000(misc),128m@0x0(flash)
bootcmd_f=nand reset; nand read.e 0x800000 0x00100000 0x00199800; check_crc32 PrEr;
bootcmd=nand reset; nand read.e 0x800000 0x00100000 0x00199800; check_crc32 PrEr; nand reset; 
nand read.e 0x40000 0x00380000 0x0027d400; check_crc32 KrNl; setenv bootargs $(console) $(bootargs_root);
bootm 0x40000; bootdelay=3
disaMvPnp=no
enaAutoRecovery=yes
pcieTune=no
pcieTune1=no
bootcmd=""

Environment size: 1411/131067 bytes

Bootloader[edit]