See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken
Foxconn U98Z066 (HP)
- HP SPS # 593836-001, AS # 593732-001
"5400012887-02L2 Sample Only PVT Config 110" is printed on the device label.
- The model is stated as BCM94313HMG2LP1.
The is no FCC ID on the label, however, silkscreened text on the back
- of the card indicates this is a BCM94313HMG2L.
lspci -nnv dump
05:00.0 Network controller : Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:145c] Physical Slot: 1 Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at f1d00000 (64-bit, non-prefetchable) [size=16K] Capabilities:  Power Management version 3 Capabilities:  Vendor Specific Information: Len=78 <?> Capabilities:  MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities:  Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities:  Device Serial Number 00-00-e5-ff-ff-ad-90-4c Capabilities: [16c] Power Budgeting <?> Kernel driver in use: bcma-pci-bridge
ssb + b43 info dump
[115945.315871] bcma-pci-bridge 0000:05:00.0: enabling device (0000 -> 0002) [115945.315948] bcma: bus2: Found chip with id 0x4313, rev 0x01 and package 0x08 [115945.315980] bcma: bus2: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0) [115945.316006] bcma: bus2: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0) [115945.316058] bcma: bus2: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0) [115945.328824] b43-phy32: Broadcom 4313 WLAN found (core revision 24) [115945.329635] b43-phy32 ERROR: FOUND UNSUPPORTED PHY (Analog 10, Type 8 (LCN), Revision 1) [115945.329642] b43: probe of bcma2:0 failed with error -95