See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Enable Networks CR3000

From WikiDevi
Jump to: navigation, search

Enable Networks CR3000

Manuf/OEM/ODM Senao WBR2100AFN

FCC approval date: 20 February 2013
Country of manuf.: Taiwan

Type: wireless router

Industry Canada ID: 3616C-WBR2100AFN

Power: 5 VDC, 1 A
Connector type: barrel

CPU1: Atheros AR1321
FLA1: 4 MiB
4,194,304 B
32,768 Kib
4,096 KiB
32 Mib
0.00391 GiB
(Eon Q32B-104HIP)
RAM1: ? MiB (Brand? Model?)

Expansion IFs: none specified

WI1 chip1: Atheros AR1321
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none

ETH chip1: Atheros AR1321
Switch: Atheros AR1321
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1


Default IP address:
the IP is used by 1 additional devices
of which 0 are Enable Networks devices

802dot11 OUI: none specified

Senao WBR2100AFNU2M-WBR2100AFN
For a list of all currently documented Atheros chipsets with specifications, see Atheros.

300N Wi-Fi Router with Dragon88 Firmware and CloudCommand XP Service

"7016A056000f" is silkscreened on the board in the FCC photos.

The device, per the FCC photos, seems to be using the following...

  • Atheros AR1321-AL1A WiSoC
  • Eon Q32B-104HIP (4MB Flash)

Per the FCC label and manual, the default (setup) SSID appears to be SETUP-XX (where XX is the last 2 digits of the UIC [Unit Identification Code]).

Likely 68:51:B7 (PowerCloud Systems) OUI (it's on the FCC label)