See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

EnGenius ESR1750

From WikiDevi
Jump to: navigation, search

EnGenius ESR1750

Manuf/OEM/ODM Senao

FCC approval date: 27 December 2013
(Est.) release date: August 2013
UPC: 655216006447 (UPC DB, On eBay)
Country of manuf.: Taiwan

Amazon image

B00E5CL6HK (Flag of the United States.svg, On Amazon, On CCC)

Type: wireless router

FCC ID: A8JESR1750, A8JESR1200, A8JESR900
Industry Canada ID: 10103A-ESR1750

Power: 12 VDC, 1.5 A
Connector type: barrel

CPU1: Qualcomm Atheros QCA9558 (720 MHz)
FLA1: 16 MiB
16,777,216 B
131,072 Kib
16,384 KiB
128 Mib
0.0156 GiB
(Macronix MX25L12845EMI-10G)
RAM1: 256 MiB
268,435,456 B
2,097,152 Kib
262,144 KiB
2,048 Mib
0.25 GiB
(Nanya NT5TU64M16DG-AC × 2)

Expansion IFs: USB 2.0, Mini PCIe
Mini PCIe slots: 1
USB ports: 1
Serial: yes, 3.3V TTL, (115200,8,N,1)

WI1 chip1: Qualcomm Atheros QCA9558
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 module: Senao PAC3300
WI2 module IF: Mini PCIe
WI2 chip1: Qualcomm Atheros QCA9880-BR4A
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL

ETH chip1: Qualcomm Atheros QCA9558
Switch: Qualcomm Atheros QCA8337N
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1


Additional chips
3A, 23V Step-Down Converter;M3Tek;IT76630M;;1;
2.4GHz High-Power High-Gain Power Amplifier;Silicon Storage Technology;SST12LP15A;;3;

Stock bootloader: U-Boot 1.0.0

Stock FW OS: Linux 2.6.31 LSDK-10.1.45

Third party firmware supported: OpenWrt

Default SSID: EnGeniusXXXXX
Default IP address:
the IP is used by 738 additional devices
of which 26 are EnGenius devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1209 additional devices
of which 49 are EnGenius devices

802dot11 OUI: 88:DC:96 (13 E, 14 W, 2014)
Ethernet OUI: 88:DC:96 (13 E, 14 W, 2014)

For a list of all currently documented Qualcomm Atheros chipsets with specifications, see Qualcomm Atheros.

Dual Band Wireless AC1750 Router

with Gigabit Ports, USB, Quantum Beam, and EnShare

Product page


"ESR1750-0.20 LFP" is silkscreened on the mainboard in the FCC photos.

"PAC3300-0.20 LFP 94V-0 1343" is silkscreened on the wireless module.

The FCC ID on the label on at least some of these devices appears to be A8JESR900 <??>.

The newer A8JESR1750 FCC ID was issued before the end of 2013.

The filings for this FCC ID do indeed mention the ESR1750 and ESR1200 within the test report...

but only 802.11n (and lower) rates seem to be tested (there is no mention of 80MHz / VHT modes)
and the photos cover the ESR900 only (w/ its 3x3 11an AR9580 radio).

Additional specifications, per EnGenius's product page, follow...

  • Weight: 0.5 lbs
  • Diameter: 6.36"
  • Height: 1.64"

Default settings (including the SSID formats and the presumed used 88:DC:96 OUI) are per the FCC sample label.


- 2.4 GHz Power Amp SST 12LP15A (x3)
- 5 GHz Power Amp marked 15E37TV (x3)

Additional external links[edit]



U-Boot 1.0.0 (May 23 2013 - 17:15:24)
Product Name: ESR1200_1750
ap136 - Scorpion 1.0
Now running in RAM - U-Boot at: 8ffc8000
Flash Manuf Id 0xc2, DeviceId0 0x20, DeviceId1 0x18
Flash size 16MB, sector count = 256
In:    serial
Out:   serial
Err:   serial
Multi Net:

athrs_sgmii_res_cal: cal value = 0xe
No valid address in Flash. Using fixed address
ath_gmac_enet_initialize: reset mask:c02200
Scorpion  ----> S17 PHY *
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
athrs17_reg_init: SUPPORT_QCA8337
athrs17_reg_init: QCA8337 ID=1302
athrs17_reg_init: complete
eth0 up
Setting 0x18116290 to 0x60c0214f

Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   3: Boot system code via Flash (default).

3: System Boot system code via Flash.
athrs17_set_portvlan_isolated complete
## Booting image at 9f040000 ...
   Image Name:   Linux Kernel Image
   Created:      2013-08-15   6:59:16 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1867435 Bytes =  1.8 MB
   Load Address: 80002000
   Entry Point:  802ad4d0
   Verifying Checksum at 0x9f040040 ...OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

Booting QCA955x
init started: BusyBox v1.7.5 (2013-08-15 14:50:11 CST)
starting pid 807, tty '/dev/console': '/sbin/config_init'
mknod: /dev/ttyS0: File exists
mknod: /dev/ttyS1: File exists
Config Init version: date: 2013/08/15
Tue Jan  1 00:00:00 UTC 2013
ln: /lib/./modules: File exists
starting pid 867, tty '/dev/ttyS0': '/sbin/config_term'
[sysUtil] Hardware ID - 01010062
[sysUtil] Load vendor[1] information

*                                  ESR1750                             *

KernelApp/Ramdisk Ver:                   Date:2013/08/15