See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Edimax BR-6475nD

From WikiDevi
Jump to: navigation, search

Edimax BR-6475nD A
Availability: common

FCC approval date: 08 June 2011
UPC: 649659019607 (UPC DB, On eBay)
EAN: 4710700927533 (UPC DB, On eBay)

Amazon image

ASIN
B000Z4J29Q (Flag of the United States.svg, On Amazon, On CCC)

Type: wireless router

FCC ID: NDD9564751027

Power: 12 VDC, 1 A
Connector type: barrel

CPU1: Ralink RT3662 (500 MHz)
FLA1: 8 MiB
8,388,608 B
65,536 Kib
8,192 KiB
64 Mib
0.00781 GiB
(Macronix MX29LV640EBTI-70G)
RAM1: 64 MiB
67,108,864 B
524,288 Kib
65,536 KiB
512 Mib
0.0625 GiB
(Winbond W9751G6JB-25)

Expansion IFs: USB 2.0 (solder pads)
USB ports: 2
Serial: yes, (57600,8,N,1)

WI1 chip1: Ralink RT3662
WI1 802dot11 protocols: an
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Ralink RT3092
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL, RP-SMA

ETH chip1: Ralink RT3662
Switch: Realtek RTL8367R
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1

abgn

Additional chips
2.4GHz Power Amplifier IC;Microchip;SST12LP15A;;2;
5GHz Power Amplifier IC;Skyworks;SE2537L;;2;

Third party firmware supported: Padavan (WiP) • (List)

Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 279 additional devices
of which 56 are Edimax devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 169 additional devices
of which 72 are Edimax devices

802dot11 OUI: 80:1F:02 (6 E, 14 W, 2011)
Ethernet OUI: 80:1F:02 (6 E, 14 W, 2011)

For a list of all currently documented Ralink chipsets with specifications, see Ralink.


300Mbps Wireless Concurrent Dual-Band Gigabit iQ Router

Product page
Edimax's GPL source code for the device (build environment is Fedora 7 i386)

This device supports AP, STA, Bridge, WDS, and universal repeater modes.

"1244-00000737-50Z" is silkscreened on the board in the FCC photos.

FCC docs show two USB ports installed, but this model does not have any populated USB ports.

Note: The RT3662 SoC only has two native USB 2.0 host IFs
.. or 1x host and 1x slave/device.

The FCC test report lists the following as identical models

The 2.4GHz radio is using two Microchip (SST) Power Amplifier ICs (SST12LP15A?).
The 5GHz radio is using two Skyworks (SiGe) SE2537L 5GHz Power Amplifier ICs.
The third receive chain is unpopulated. There are only two antennas in use.
Testing of the device on XFastest (CN) (w/ good external and Web UI images)

EDIMAX (2.4GHz) and EDIMAX2 (5GHz) SSIDs (probably changed from default?)

The sample SSIDs shown in the manual are Edimax, 80:1F:02 OUIs
If not these or EDIMAX+EDIMAX2, the default SSIDs
may possibly be Edimax2.4GHz and Edimax5GHz.

The power adapter shown in the FCC photos and on XFastest is a

DVE DSA-12GX-12 FUS 120120 (100-240VAC ~ 50/60Hz, 0.3A -> 12VDC, 1A).

Serial[edit]

The serial port is shown as being under the PoE board in the FCC photos.

It is almost certainly omitted in this particular model.

Pinout[edit]

To RTL8367R <--   [ (TxD) (GND) (RxD) ][ (Vcc) ]    --> To LEDs

Images[edit]