See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

E-Lins H685

From WikiDevi
Jump to: navigation, search

E-Lins H685

(Est.) initial retail price (in USD): $200

Type: wireless router, LTE modem

Power: ? VDC, ? A

CPU1: Ralink RT5350
FLA1: 8 MiB
8,388,608 B
65,536 Kib
8,192 KiB
64 Mib
0.00781 GiB
(Brand? Model?)
RAM1: 64 MiB
67,108,864 B
524,288 Kib
65,536 KiB
512 Mib
0.0625 GiB
(Brand? Model?)

Expansion IFs: SIM Card slot

WI1 chip1: Ralink RT5350
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Ralink RT5350
Switch: Ralink RT5350
LAN speed: 10/100
LAN ports: 1
WAN speed: 10/100
WAN ports: 1

bgn

Flags: 4G modem

802dot11 OUI: none specified

For a list of all currently documented Ralink chipsets with specifications, see Ralink.


Wireless 4G LTE Cellular Industrial Router

Product Page

  • Has internal cellular modem card: Sierra wireless Airprime MC7304 Qualcomm 4G
  • 2G+3G+4G, Compatible with LTE/DC-HSPA+/HSPA+/HSUPA/HSDPA/UMTS/EVDO/EDGE/GPRS/GSM networks
  • 1 wifi antenna
  • 1 cellular + GNSS antenna
  • Internal GNSS receiver (GPS+GLONASS)
  • Digital I/O pins
  • Serial RX/TX RS232 / RS485
  • SPI header


Serial Output[edit]

u-boot
U-Boot 1.1.3 (Aug 16 2012 - 13:48:50)                                           
                                                                                
Board: Ralink APSoC DRAM:   8 MB                                                
relocate_code Pointer at: 807b4000                                              
spi_wait_nsec: 42                                                               
spi device id: c2 20 17 c2 20 (2017c220)                                        
find flash: MX25L6405D                                                          
raspi_read: from:30000 len:1000                                                 
.*** Warning - bad CRC, using default environment                               
                                                                                
============================================                                    
Ralink UBoot Version: 3.6.0.0                                                   
--------------------------------------------                                    
ASIC 5350_MP (Port5<->None)                                                     
DRAM_CONF_FROM: Boot-Strapping                                                  
DRAM_TYPE: SDRAM                                                                
DRAM_SIZE: 64 Mbits                                                             
DRAM_WIDTH: 16 bits                                                             
DRAM_TOTAL_WIDTH: 16 bits                                                       
TOTAL_MEMORY_SIZE: 8 MBytes                                                     
Flash component: SPI Flash                                                      
Date:Aug 16 2012  Time:13:48:50                                                 
============================================                                    
icache: sets:256, ways:4, linesz:32 ,total:32768                                
dcache: sets:128, ways:4, linesz:32 ,total:16384                                
                                                                                
 ##### The CPU freq = 360 MHZ ####                                              
 estimate memory size =8 Mbytes                                                 
                                                                                
Please choose the operation:                                                    
   1: Load system code to SDRAM via TFTP.                                       
   2: Load system code then write to Flash via TFTP.                            
   3: Boot system code via Flash (default).                                     
   4: Entr boot command line interface.                                         
   7: Load Boot Loader code then write to Flash via Serial.                     
   9: Load Boot Loader code then write to Flash via TFTP.                       
                                                                                
You choosed 3                                                                   
                                                                                
 0                                                                              
                                                                                
3: System Boot system code via Flash.                                           
## Booting image at bc200000 ...                                                
raspi_read: from:200000 len:40                                                  
.   Image Name:   Linux Kernel Image                                            
   Created:      2015-05-27  10:30:43 UTC                                       
   Image Type:   MIPS Linux Kernel Image (lzma compressed)                      
   Data Size:    6036707 Bytes =  5.8 MB                                        
   Load Address: 80000000                                                       
   Entry Point:  8041b000                                                       
raspi_read: from:200040 len:5c1ce3                                              
......................................................................

Note: U-boot memory size detection is wrong. See below for correct memory size detection by Linux :

Linux
OK                                                                       
No initrd                                                                 
## Transferring control to Linux (at address 8041b000) ...                
## Giving linux memsize in MB, 64                                         
                                                                          
Starting kernel ...                                                       
                                                                          
                                                                          
LINUX started...                                                          
                                                                          
 THIS IS ASIC                                                             
Linux version 2.6.21 (root@localhost.localdomain) (gcc version 3.4.2) #2085 Wed5

 The CPU frequency set to 360 MHz
CPU revision is: 0001964c                                                       
Determined physical RAM map:                                                    
 memory: 04000000 @ 00000000 (usable)                                           
Initrd not found or empty - disabling initrd                                    
Built 1 zonelists.  Total pages: 16256                                          
Kernel command line: console=ttyS1,57600n8 root=/dev/ram0                       
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.    
Primary data cache 16kB, 4-way, linesize 32 bytes.                              
Synthesized TLB refill handler (20 instructions).                               
Synthesized TLB load handler fastpath (32 instructions).                        
Synthesized TLB store handler fastpath (32 instructions).                       
Synthesized TLB modify handler fastpath (31 instructions).                      
Cache parity protection disabled                                                
cause = 4080802c, status = 11000000                                             
PID hash table entries: 256 (order: 8, 1024 bytes)                              
calculating r4koff... 0015f900(1440000)                                         
CPU frequency 360.00 MHz                                                        
Using 180.000 MHz high precision timer.                                         
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)                   
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)                    
Memory: 55868k/65536k available (3476k kernel code, 9604k reserved, 724k data, )
Mount-cache hash table entries: 512                                             
NET: Registered protocol family 16                                              
usbcore: registered new interface driver usbfs                                  
usbcore: registered new interface driver hub                                    
usbcore: registered new device driver usb                                       
Time: MIPS clocksource has been installed.                                      
NET: Registered protocol family 2                                               
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)                  
TCP established hash table entries: 2048 (order: 2, 16384 bytes)                
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)                        
TCP: Hash tables configured (established 2048 bind 2048)                        
TCP reno registered                                                             
detected lzma initramfs                                                         
detected lzma initramfs                                                         
initramfs: LZMA lc=3,lp=0,pb=2,dictSize=1048576,origSize=22640640               
LZMA initramfs by Ming-Ching Tiew <mctiew@yahoo.com>...........................)
MX25L6405D(c2 2017c220) (8192 Kbytes)                                           
mtd .name = raspi, .size = 0x00800000 (8M) .erasesize = 0x00010000 (64K) .numer0
Creating 6 MTD partitions on "raspi":                                           
0x00000000-0x00800000 : "ALL"                                                   
0x00000000-0x00030000 : "Bootloader"                                            
0x00030000-0x00050000 : "Config"                                                
0x00050000-0x00060000 : "Factory"                                               
0x00060000-0x00200000 : "user_fs"                                               
0x00200000-0x01000000 : "Kernel"                                                
mtd: partition "Kernel" extends beyond the end of device "raspi" -- size trunca0
Ralink Kernel NVRAM initializing......                                          
Ralink Kernel NVRAM load parameter...                                           
Ralink Kernel NVRAM load 0 crc=1444017804                                       
Ralink Kernel NVRAM load 0 crc ok                                               
Ralink Kernel NVRAM  0 backup crc ok                                            
Ralink Kernel NVRAM  0 write fb to fb backup                                    
Ralink Kernel NVRAM load 1 crc=-518566093                                       
Ralink Kernel NVRAM load 1 crc error, load bakcup                               
Ralink Kernel NVRAM load 1 backup crc error, paramter error need to reset to fay
RT3xxx EHCI/OHCI init.                                                          
fuse init (API version 7.8)                                                     
io scheduler noop registered (default)                                          
Ralink gpio driver initialized                                                  
i2cdrv_major = 218                                                              
HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096               
N_HDLC line discipline registered.                                              
Ralink APSoC Hardware Watchdog Timer                                            
SoftDog: cannot register miscdev on minor=130 (err=-16)                         
Serial: 8250/16550 driver $Revision: 1.8 $ 2 ports, IRQ sharing disabled        
serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A                      
serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A                      
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize          
loop: loaded (max 8 devices)                                                    
rdm_major = 253                                                                 
Ralink APSoC Ethernet Driver Initilization. v2.1  256 rx/tx descriptors allocat!
MAC_ADRH -- : 0x00000866                                                        
MAC_ADRL -- : 0x01xxxxxx                                                        
PROC INIT OK!                                                                   
IMQ starting with 2 devices...                                                  
IMQ driver loaded successfully.                                                 
        Hooking IMQ before NAT on PREROUTING.                                   
        Hooking IMQ after NAT on POSTROUTING.                                   
PPP generic driver version 2.4.2                                                
PPP Deflate Compression module registered                                       
PPP BSD Compression module registered                                           
PPP MPPE Compression module registered                                          
NET: Registered protocol family 24                                              
PPPoL2TP kernel driver, V0.17                                                   
tun: Universal TUN/TAP device driver, 1.6                                       
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>                          
                                                                                
                                                                                
=== pAd = c0000000, size = 804840 ===                                           
                                                                                
<-- RTMPAllocAdapterBlock, Status=0                                             
block2mtd: version $Revision: 1.1.1.1 $                                         
rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller                            
rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1          
rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x101c0000                              
rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004         
usb usb1: configuration #1 chosen from 1 choice                                 
hub 1-0:1.0: USB hub found                                                      
hub 1-0:1.0: 1 port detected                                                    
rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller                                 
rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 2          
rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x101c1000                              
usb usb2: configuration #1 chosen from 1 choice                                 
hub 2-0:1.0: USB hub found                                                      
hub 2-0:1.0: 1 port detected                                                    
usbcore: registered new interface driver cdc_acm                                
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB mos
usbcore: registered new interface driver asix                                   
usbcore: registered new interface driver cdc_ether                              
usbcore: registered new interface driver cdc_subset                             
usbcore: registered new interface driver usbserial                              
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic      
usbcore: registered new interface driver usbserial_generic                      
drivers/usb/serial/usb-serial.c: USB Serial Driver core                         
drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1)
usbcore: registered new interface driver option                                 
drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1                  
drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra USB mm
usbcore: registered new interface driver sierra                                 
drivers/usb/serial/sierra.c: USB Driver for Sierra Wireless USB modems: v.1.7.40
drivers/usb/serial/usb-serial.c: USB Serial support registered for GobiSerial   
usbcore: registered new interface driver GobiSerial                             
GobiSerial: 2013-08-28/SWI_2.12                                                 
hso: drivers/usb/serial/hso.c: 1.6-Option Option Wireless                       
usbcore: registered new interface driver hso                                    
i2c /dev entries driver                                                         
Netfilter messages via NETLINK v0.30.                                           
nf_conntrack version 0.5.0 (512 buckets, 4096 max)                              
IPv4 over IPv4 tunneling driver                                                 
GRE over IPv4 tunneling driver                                                  
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone              
ipt_time loading                                                                
arp_tables: (C) 2002 David S. Miller                                            
ip_queue: failed to register queue handler                                      
TCP cubic registered                                                            
Initializing XFRM netlink socket                                                
NET: Registered protocol family 1                                               
NET: Registered protocol family 10                                              
NET: Registered protocol family 17                                              
NET: Registered protocol family 15                                              
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>                   
All bugs added by David S. Miller <davem@redhat.com>                            
Freeing unused kernel memory: 4704k freed                                       
init started: BusyBox v1.12.1 (2014-06-05 12:12:38 CST)                         
startAlgorithmics/MIPS FPU Emulator v1.5                                        
ing pid 663, tty '': '/etc_ro/rcS'                                              
devpts: called with bogus options                                               
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.                           
insmod: lc_ether.ko: module not found                                           
GobiNet: 2013-09-30/SWI_2.21                                                    
usbcore: registered new interface driver fg_ether                               
usbcore: registered new interface driver GobiNet                                
usbcore: registered new interface driver wpd_qmi                                
power_led: normal                                                               
                                                                                
wait_nvram_ok: nvram_daemon OK!                                                 
check ID OK!internet.sh                                                         
killall: syslogd: no process killed                                             
killall: klogd: no process killed                                               
make snmp config file false!                                                    
killall: snmpd: no process killed                                               
killall: gps: no process killed                                                 
killall: dtu: no process killed                                                 
make dtu config file succeed!                                                   
make gps config file succeed!                                                   
Password changed                                                                
GPS for SIERRA_MC73xx_QMI CONFIG OK!                                            
GPS for SIERRA_MC73xx_QMI CONFIG OK!                                            
Password changed                                                                
killall: racoon: no process killed                                              
usb 1-1: new high speed USB device using rt3xxx-ehci and address 2              
usb 1-1: config 1 has an invalid interface number: 8 but max is 3               
usb 1-1: config 1 has no interface number 1                                     
usb 1-1: configuration #1 chosen from 1 choice                                  
GobiSerial 1-1:1.0: GobiSerial converter detected                               
usb 1-1: GobiSerial converter now attached to ttyUSB0                           
GobiSerial 1-1:1.2: GobiSerial converter detected                               
usb 1-1: GobiSerial converter now attached to ttyUSB1                           
GobiSerial 1-1:1.3: GobiSerial converter detected                               
usb 1-1: GobiSerial converter now attached to ttyUSB2                           
usb0: register 'GobiNet' at usb-rt3xxx-1, QmiNet Ethernet Device, ea:76:38:xx:xx
rmmod: ralink_wdt: No such file or directory                                    
rmmod: cls: No such file or directory                                           
rmmod: hw_nat: No such file or directory                                        
rmmod: raeth: No such file or directory                                         
insmod: bridge.ko: module not found                                             
insmod: mii.ko: module not found                                                
insmod: raeth.ko: module not found                                              
                                                                                
phy_tx_ring = 0x0060f000, tx_ring = 0xa060f000                                  
                                                                                
phy_rx_ring0 = 0x029f8000, rx_ring0 = 0xa29f8000                                
MAC_ADRH -- : 0x00000866                                                        
MAC_ADRL -- : 0x010458b7                                                        
RT305x_ESW: Link Status Changed                                                 
creating qcqmi0                                                                 
                                                                                
##### disable 1st wireless interface #####                                      
rmmod: rt2860v2_ap_net: No such file or directory                               
rmmod: rt2860v2_ap: No such file or directory                                   
rmmod: rt2860v2_ap_util: No such file or directory                              
rmmod: rt2860v2_sta_net: No such file or directory                              
rmmod: rt2860v2_sta: No such file or directory                                  
rmmod: rt2860v2_sta_util: No such file or directory                             
insmod: rt2860v2_ap_util.ko: module not found                                   
insmod: rt2860v2_ap.ko: module not found                                        
insmod: rt2860v2_ap_net.ko: module not found                                    
rmmod: nf_nat_pptp: No such file or directory                                   
rmmod: nf_conntrack_pptp: No such file or directory                             
rmmod: nf_nat_proto_gre: No such file or directory                              
rmmod: nf_conntrack_proto_gre: No such file or directory                        
killall: reboot_timer: no process killed                                        
killall: reboot_at_time: no process killed                                      
/flash/run.sh: line 2: /flash/bacnet-studio-start.sh: not found                 
killall: keepalived: no process killed                                          
make vrrp config file succeed!                                                  
RX DESC a291d000  size = 2048                                                   
<-- RTMPAllocTxRxRingMemory, Status=0                                           
Key1Str is Invalid key length(0) or Type(0)                                     
Key2Str is Invalid key length(0) or Type(0)                                     
Key3Str is Invalid key length(0) or Type(0)                                     
Key4Str is Invalid key length(0) or Type(0)                                     
1. Phy Mode = 9                                                                 
2. Phy Mode = 9                                                                 
3. Phy Mode = 9                                                                 
RTMPSetPhyMode: channel is out of range, use first channel=0                    
MCS Set = ff 00 00 00 01                                                        
SYNC - BBP R4 to 20MHz.l                                                        
cat: can't open '/tmp/.mc77x0_ConnectionManager_info': No such file or directory
Main bssid = 08:66:01:xx:xx:xx                                                  
<==== rt28xx_init, Status=0                                                     
0x1300 = 00064380                                                               
vconfig: ioctl error for rem: Invalid argument                                  
vconfig: ioctl error for rem: Invalid argument                                  
rmmod: 8021q: No such file or directory                                         
insmod: 8021q.ko: module not found                                              
eth2.2: Setting MAC address to  08 66 01 xx xx xx.                              
device eth2 entered promiscuous mode                                            
VLAN (eth2.2):  Setting underlying device (eth2) to promiscious mode.           
ifconfig: ioctl 0x8913 failed: No such device                                   
brctl: bridge br0: No such device or address                                    
##### config Ralink ESW vlan partition (LLLLW) #####                            
switch reg write offset=14, value=405555                                        
switch reg write offset=50, value=2001                                          
switch reg write offset=98, value=7f3f                                          
switch reg write offset=e4, value=3f                                            
switch reg write offset=40, value=1001                                          
switch reg write offset=44, value=1001                                          
switch reg write offset=48, value=1002                                          
switch reg write offset=70, value=ffff506f                                      
done.                                                                           
device ra0 entered promiscuous mode                                             
eth2.1: dev_set_promiscuity(master, 1)                                          
device eth2.1 entered promiscuous mode                                          
/sbin/wan.sh: line 17: cell_em660_fix_network_bug.sh: not found                 
br0: port 2(eth2.1) entering learning state                                     
br0: port 1(ra0) entering learning state                                        
ifconfig: ioctl 0x8914 failed: Cannot assign requested address                  
ifconfig: ioctl 0x8914 failed: Cannot assign requested address                  
/sbin/lan.sh: line 63: hostname: not found                                      
br0: topology change detected, propagating                                      
br0: port 2(eth2.1) entering forwarding state                                   
br0: topology change detected, propagating                                      
br0: port 1(ra0) entering forwarding state                                      
cell set network type; modem=SIERRA_MC73xx_QMI                                  
/etc_ro/rcS: line 98: webctrl: not found                                        
killall: link_backup: no process killed                                         
make link_backup config file succeed!                                           
LINK_BACKUP status is off!                                                      
killall: crond: no process killed                                               
comgt 00:00:41 -> -- Error Report --                                            
comgt 00:00:41 -> ----> ^                                                       
comgtADDRCONF(NETDEV_UP): usb0: link is not ready                               
 00:00:41 -> Error @0, line 1, Could not open scriptfile "/tmp/.lte_stop_start..
. (1)                                                                           
                                                                                
iptables: No chain/target/match by that name                                    
iptables: No chain/target/match by that name                                    
killall: udhcpd: no process killed                                              
Set: phy[0].reg[0] = 3900                                                       
Set: phy[1].reg[0] = 3900                                                       
Set: phy[2].reg[0] = 3900                                                       
Set: phy[3].reg[0] = 3900                                                       
Set: phy[0].reg[0] = 3100                                                       
Set: phy[1].reg[0] = 3100                                                       
Set: phy[2].reg[0] = 3100                                                       
Set: phy[3].reg[0] = 3100                                                       
ifconfig: ioctl 0x8913 failed: No such device                                   
set_sim_pin.sh /dev/ttyUSB2                                                     
/dev/ttyUSB2:                                                                   
Load Timer Module(Wdg/Soft)                                                     
Started WatchDog Timer.                                                         
killall rt2860apd 1>/dev/null 2>&1                                              
iptables -F -t filter 1>/dev/null 2>&1                                          
iptables -D FORWARD -j macipport_filter 1>/dev/null 2>&1                        
iptables -F macipport_filter 1>/dev/null 2>&1                                   
iptables -D FORWARD -j web_filter  1>/dev/null 2>&1                             
iptables -F web_filter  1>/dev/null 2>&1                                        
iptables -D FORWARD -j malicious_filter 1>/dev/null 2>&1                        
iptables -F malicious_filter  1>/dev/null 2>&1                                  
iptables -D INPUT -j malicious_input_filter 1>/dev/null 2>&1                    
iptables -F malicious_input_filter  1>/dev/null 2>&1                            
iptables -P INPUT ACCEPT                                                        
iptables -P OUTPUT ACCEPT                                                       
iptables -P FORWARD ACCEPT                                                      
iptables -t filter -N web_filter 1>/dev/null 2>&1                               
iptables -t filter -N macipport_filter 1>/dev/null 2>&1                         
iptables -t filter -N malicious_filter 1>/dev/null 2>&1                         
iptables -t filter -N synflood_filter 1>/dev/null 2>&1                          
iptables -t filter -N malicious_input_filter 1>/dev/null 2>&1                   
iptables -t filter -N synflood_input_filter 1>/dev/null 2>&1                    
iptables -t filter -A FORWARD -j web_filter 1>/dev/null 2>&1                    
iptables -t filter -A FORWARD -j macipport_filter 1>/dev/null 2>&1              
iptables -t filter -A FORWARD -j malicious_filter 1>/dev/null 2>&1              
iptables -t filter -A malicious_filter -p tcp --syn -j synflood_filter 1>/dev/n1
iptables -t filter -A INPUT -j malicious_input_filter 1>/dev/null 2>&1          
iptables -t filter -A malicious_input_filter -p tcp --syn -j synflood_input_fil1
iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmt1
iptables -D INPUT -i usb0 -p tcp --dport 23 -j DROP                             
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p tcp --dport 23 -j DROP                             
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p tcp --dport 23 -j ACCEPT                           
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p tcp --dport 23 -j ACCEPT                           
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -I INPUT -i usb0 -p tcp --dport 23 -j ACCEPT                           
iptables -D INPUT -i usb0 -p tcp --dport 22 -j DROP                             
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p tcp --dport 22 -j DROP                             
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p tcp --dport 22 -j ACCEPT                           
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p tcp --dport 22 -j ACCEPT                           
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -I INPUT -i usb0 -p tcp --dport 22 -j ACCEPT                           
iptables -D INPUT -i usb0 -p udp --dport 161:162 -j DROP                        
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p udp --dport 161:162 -j DROP                        
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p udp --dport 161:162 -j ACCEPT                      
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p udp --dport 161:162 -j ACCEPT                      
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -I INPUT -i usb0 -p udp --dport 161:162 -j ACCEPT                      
iptables -D INPUT -i usb0 -p tcp --dport 1723 -j DROP                           
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p tcp --dport 1723 -j DROP                           
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p tcp --dport 1723 -j ACCEPT                         
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p tcp --dport 1723 -j ACCEPT                         
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -I INPUT -i usb0 -p tcp --dport 1723 -j ACCEPT                         
iptables -D INPUT -i usb0 -p udp --dport 500 -j DROP                            
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p udp --dport 500 -j DROP                            
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p udp --dport 500 -j ACCEPT                          
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p udp --dport 500 -j ACCEPT                          
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -I INPUT -i usb0 -p udp --dport 500 -j ACCEPT                          
iptables -D INPUT -i usb0 -p udp --dport 4500 -j DROP                           
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p udp --dport 4500 -j DROP                           
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p udp --dport 4500 -j ACCEPT                         
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p udp --dport 4500 -j ACCEPT                         
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -I INPUT -i usb0 -p udp --dport 4500 -j ACCEPT                         
iptables -D INPUT -i usb0 -p tcp --dport 2601:2605 -j DROP                      
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p tcp --dport 2601:2605 -j DROP                      
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p tcp --dport 2601:2605 -j ACCEPT                    
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -p tcp --dport 2601:2605 -j ACCEPT                    
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -I INPUT -i usb0 -p tcp --dport 2601:2605 -j ACCEPT                    
iptables -A malicious_input_filter -i usb0 -p tcp --dport 80 -j ACCEPT          
iptables -D INPUT -i usb0 -m state --state NEW,INVALID -p tcp --dport 0:65535 -P
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -m state --state NEW,INVALID -p udp --dport 0:65535 -P
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -m state --state NEW,INVALID -p tcp --dport 0:65535 -P
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -D INPUT -i usb0 -m state --state NEW,INVALID -p udp --dport 0:65535 -P
iptables: Bad rule (does a matching rule exist in that chain?)                  
iptables -t nat -D PREROUTING -j port_forward 1>/dev/null 2>&1                  
iptables -t nat -D POSTROUTING -j port_forward_snat 1>/dev/null 2>&1            
iptables -t nat -F port_forward  1>/dev/null 2>&1; iptables -t nat -X port_forw1
iptables -t nat -F port_forward_snat  1>/dev/null 2>&1; iptables -t nat -X port1
iptables -t nat -D PREROUTING -j DMZ 1>/dev/null 2>&1                           
iptables -t nat -F DMZ 1>/dev/null 2>&1; iptables -t nat -X DMZ  1>/dev/null 2>1
iptables -t nat -N port_forward 1>/dev/null 2>&1; iptables -t nat -I PREROUTING1
iptables -t nat -N port_forward_snat 1>/dev/null 2>&1; iptables -t nat -I POSTR1
iptables -t nat -N DMZ 1>/dev/null 2>&1; iptables -t nat -I PREROUTING 2 -j DMZ1
echo "" > /etc/.port_forward 1>/dev/null 2>&1                                   
iptables -t nat -D POSTROUTING -j chain_ipsec_9 1>/dev/null 2>&1                
iptables -t nat -D POSTROUTING -j chain_ipsec_8 1>/dev/null 2>&1                
iptables -t nat -D POSTROUTING -j chain_ipsec_7 1>/dev/null 2>&1                
iptables -t nat -D POSTROUTING -j chain_ipsec_6 1>/dev/null 2>&1                
iptables -t nat -D POSTROUTING -j chain_ipsec_5 1>/dev/null 2>&1                
iptables -t nat -D POSTROUTING -j chain_ipsec_4 1>/dev/null 2>&1                
iptables -t nat -D POSTROUTING -j chain_ipsec_3 1>/dev/null 2>&1                
iptables -t nat -D POSTROUTING -j chain_ipsec_2 1>/dev/null 2>&1                
iptables -t nat -D POSTROUTING -j chain_ipsec_1 1>/dev/null 2>&1                
iptables -t nat -D POSTROUTING -j chain_ipsec_0 1>/dev/null 2>&1                
iptables -t nat -I POSTROUTING -j chain_ipsec_9 >/dev/null 2>&1                 
iptables -t nat -I POSTROUTING -j chain_ipsec_8 >/dev/null 2>&1                 
iptables -t nat -I POSTROUTING -j chain_ipsec_7 >/dev/null 2>&1                 
iptables -t nat -I POSTROUTING -j chain_ipsec_6 >/dev/null 2>&1                 
iptables -t nat -I POSTROUTING -j chain_ipsec_5 >/dev/null 2>&1                 
iptables -t nat -I POSTROUTING -j chain_ipsec_4 >/dev/null 2>&1                 
iptables -t nat -I POSTROUTING -j chain_ipsec_3 >/dev/null 2>&1                 
iptables -t nat -I POSTROUTING -j chain_ipsec_2 >/dev/null 2>&1                 
iptables -t nat -I POSTROUTING -j chain_ipsec_1 >/dev/null 2>&1                 
iptables -t nat -I POSTROUTING -j chain_ipsec_0 >/dev/null 2>&1                 
ntp.sh                                                                          
ddns.sh                                                                         
killall: icmp_check: no process killed                                          
kill -9 `cat /var/run/wscd.pid.ra0`                                             
cat: can't open '/var/run/wscd.pid.ra0': No such file or directory              
kill: you need to specify whom to kill                                          
iwpriv ra0 set WscConfMode=0 1>/dev/null 2>&1                                   
make icmp check config file false!                                              
route delete 239.255.255.250 1>/dev/null 2>&1                                   
killall -9 watchdog 1>/dev/null 2>&1                                            
rmmod ralink_wdt.o                                                              
Unload Timer Module(Wdg/Soft)                                                   
insmod ralink_wdt.o                                                             
Load Timer Module(Wdg/Soft)                                                     
wdg.sh                                                                          
watchdog                                                                        
Started WatchDog Timer.                                                         
killall -q zebra                                                                
start_zebra.sh start &                                                          
start_ripd.sh&                                                                  
start_ospfd.sh&                                                                 
start_bgpd.sh&                                                                  
webs: Listening for HTTP requests at address 192.168.8.1                        
linkbackup init para succeed!                                                   
network error reboot init para false!                                           
 gps init para succeed!                                                         
 dtu init para succeed!                                                         
 remotelog init para succeed!                                                   
 msg init para succeed!                                                         
vrrp init para succeed!                                                         
 connect_modem init para succeed!                                               
 msg init para succeed!                                                         
/etc_ro/rcS: line 112: start_nms.sh: not found                                  
killall: msg_cmd: no process killed                                             
make msg config file succeed!                                                   
iptables: No chain/target/match by that name                                    
iptables: No chain/target/match by that name                                    
killall: slqssdk: no process killed                                             
killall: slqssdk: no process killed                                             
killall: slqssdk: no process killed                                             
killall: slqssdk: no process killed                                             
killall: slqssdk: no process killed                                             
ICMP Check: get config_file_handle error!                                       
ICMP Check status is off!                                                       
iptables: No chain/target/match by that name                                    
sh: pidof: not found                                                            
Instance ID :0                                                                  
Session State:1                                                                 
Instance ID :1                                                                  
Failed to get Session State                                                     
Instance ID :2                                                                  
Failed to get Session State                                                     
Instance ID :3                                                                  
Failed to get Session State                                                     
Instance ID :4                                                                  
Failed to get Session State                                                     
Instance ID :5                                                                  
Failed to get Session State                                                     
Instance ID :6                                                                  
Failed to get Session State                                                     
Instance ID :7                                                                  
Failed to get Session State                                                     
Modem not registered to network, reg state 2                                    
starting pid 3996, tty '/dev/ttyS1': '/sbin/getty -L ttyS1 5760killall: connectd
                                                                                
(none) login: make connect modem config file succeed!                           
Connect_modem for SIERRA_MC73xx_QMI CONFIG Not Support!                         
Connect_modem for SIERRA_MC73xx_QMI CONFIG Not Support!                         
Modem not registered to network, reg state 2                                    

Openwrt: [1] success another boot log