See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

D-Link DWR-118 rev A1

From WikiDevi
Jump to: navigation, search

D-Link DWR-118 A1
Availability: now

Manuf/OEM/ODM Alpha Networks WR7620A-183AA-DL REV:1.2

FCC approval date: 23 March 2016
Country of manuf.: China
Series: AC750

Amazon image

ASIN
B00PVDD7C4 (Flag of the United Kingdom.svg, On Amazon, On CCCmultiple uses)
multiple revisions of this device, use caution

Type: wireless router

FCC ID: KA2WR118A1
PCB ID: WR7620A-183AA-DL

Power: 12 VDC, 1.5 A
Connector type: barrel

CPU1: MediaTek MT7620A (580 MHz)
FLA1: 8 MiB
8,388,608 B
65,536 Kib
8,192 KiB
64 Mib
0.00781 GiB
(Macronix MX25L6405D (in US version))
FLA2: 16 MiB
16,777,216 B
131,072 Kib
16,384 KiB
128 Mib
0.0156 GiB
(Winbond W25Q128FV (in EU version))
RAM1: 64 MiB
67,108,864 B
524,288 Kib
65,536 KiB
512 Mib
0.0625 GiB
(Winbond W971GG6KB-25)

Expansion IFs: USB 2.0
USB ports: 1
Serial: yes, 4-pin header, J1

WI1 chip1: MediaTek MT7620A
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: MediaTek MT7610EN
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 1x1:1
WI2 antenna connector: none

ETH chip1: MediaTek MT7620A
ETH chip2: IC+ IP1001LF
ETH chip3: IC+ IP1001LF
LAN speed: 10/100
LAN ports: 4
WAN speed: 10/100/1000
WAN ports: 1

abgn+ac

Stock bootloader: CDW57CDL_003 Jboot B895 (JRecovery Version R1.2 2015/08/31 17:24)

Stock FW OS: Linux 2.6.36

Third party firmware supported: OpenWrt (unofficially)

Default SSID: DWR-118_XXXXXX (1 addl. devices), DWR-118_5GHz_XXXXXX (1 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1122 additional devices
of which 25 are D-Link devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1157 additional devices
of which 59 are D-Link devices

802dot11 OUI: A0:AB:1B (2 E, 2 W, 2016)
Ethernet OUI: A0:AB:1B (2 E, 2 W, 2016)

 CPU1 brandWI1 chip1 brandWI2 chip1 brand
D-Link DWR-118 rev A1MediaTekMediaTekMediaTek
D-Link DWR-118 rev A2MediaTekMediaTekMediaTek
D-Link DWR-118 rev B1RealtekRealtekRealtek
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.


Wireless AC750 Dual-Band Multi-WAN Router

Product page

Ports:

  • WAN: 1x GbE (10/100/1000) ports
  • LAN: 3x FE (10/100) + 1x GbE (10/100/1000) ports
  • USB: 1x USB 2.0 (3G/4G LTE modem backup support)

Antennas:

  • 2x external 5dBi antennas (2.4/5GHz)
  • 1x internal 5dBi antenna (2.4GHz)


Additional external links[edit]

(openwrt-CHKDSK88 - Paweł Dembicki)

See also[edit]

Serial[edit]

J1 - 4-pin header (57600, 8n1)

Boot log[edit]

Boot log • >>
CDW57CDL_003 Jboot B895
JRecovery Version R1.2 2015/08/31 17:24
spi device id: ef 40 18 0 0 (40180000)
SPI FLASH: W25Q128FV 16M
.
....................
Starting kernel @80000000...

LINUX started...

 THIS IS ASIC
Linux version 2.6.36 (tja@localhost.localdomain) (gcc version 4.3.5 (Buildroot 2011.05) ) #10 Thu Feb 18 16:29:01 CST 2016
CMD_LINE:console=ttyS1,57600n8 root=/dev/mtdblock3

 The CPU feqenuce set to 580 MHz
 PCIE: bypass PCIe DLL.
 PCIE: Elastic buffer control: Addr:0x68 -> 0xB4
 disable all power about PCIe
CPU revision is: 00019650 (MIPS 24Kc)
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
Zone PFN ranges:
  Normal   0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00004000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock3
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Writing ErrCtl register=0006e88b
Readback ErrCtl register=0006e88b
Memory: 60736k/65536k available (3163k kernel code, 4800k reserved, 767k data, 180k init, 0k highmem)
Hierarchical RCU implementation.
    RCU debugfs-based tracing is enabled.
    Verbose stalled-CPUs detection is disabled.
NR_IRQS:128
Console: colour dummy device 80x25
console [ttyS1] enabled
Calibrating delay loop... 386.04 BogoMIPS (lpj=772096)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
NET: Registered protocol family 16
RALINK_GPIOMODE = 40a09d
RALINK_GPIOMODE = 40a09d
PPLL_CFG1=0xe64000
MT7620 PPLL lock
PPLL_DRV =0x80080504
start PCIe register access
RALINK_PCI_PCICFG_ADDR = 1000f0

*************** MT7620 PCIe RC mode *************
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
pci 0000:00:00.0: BAR 1: set to [mem 0x20200000-0x2020ffff] (PCI address [0x20200000-0x2020ffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff]
pci 0000:01:00.0: BAR 0: set to [mem 0x20000000-0x200fffff] (PCI address [0x20000000-0x200fffff]
pci 0000:01:00.1: BAR 0: assigned [mem 0x20100000-0x201fffff]
pci 0000:01:00.1: BAR 0: set to [mem 0x20100000-0x201fffff] (PCI address [0x20100000-0x201fffff]
pci 0000:00:00.0: PCI bridge to [bus 01-01]
pci 0000:00:00.0:   bridge window [io  disabled]
pci 0000:00:00.0:   bridge window [mem 0x20000000-0x201fffff]
pci 0000:00:00.0:   bridge window [mem pref disabled]
BAR0 at slot 0 = 0
bus=0x0, slot = 0x0
res[0]->start = 0
res[0]->end = 0
res[1]->start = 20200000
res[1]->end = 2020ffff
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
bus=0x1, slot = 0x0
res[0]->start = 20000000
res[0]->end = 200fffff
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
bus=0x1, slot = 0x0
res[0]->start = 20100000
res[0]->end = 201fffff
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RT3xxx EHCI/OHCI init.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 118
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
Ralink gpio driver initialized
Enable Ralink GDMA Controller Module 
GDMA IP Version=3
======================================
   SPI driver, modified by Jason
======================================
<-----
0x60: 0x0040809d
-----
spidrv_major = 217
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x10000500 (irq = 37) is a 16550A
serial8250: ttyS1 at MMIO 0x10000c00 (irq = 12) is a 16550A
brd: module loaded
deice id : ef 40 18 0 0 (40180000)
W25Q128BV(ef 40180000) (16384 Kbytes)
mtd .name = raspi, .size = 0x01000000 (0M) .erasesize = 0x00000010 (0K) .numeraseregions = 4096
Creating 7 MTD partitions on "raspi":
0x000000000000-0x000001000000 : "Whole"
0x000000000000-0x000000010000 : "Bootloader"
0x000000010000-0x000000150000 : "Kernel"
0x000000180000-0x000000e90000 : "RootFS"
0x000000e90000-0x000000f10000 : "Storage"
0x000000f10010-0x000000ff0000 : "UI"
mtd: partition "UI" doesn't start on an erase block boundary -- force read-only
0x000000ff0000-0x000001000000 : "Config"
rdm_major = 253
SMACCR1 -- : 0x0000000c
SMACCR0 -- : 0x432880f8
Ralink APSoC Ethernet Driver Initilization. v3.0  256 rx/tx descriptors allocated, mtu = 1500!
NAPI enable, Tx Ring = 256, Rx Ring = 256
SMACCR1 -- : 0x0000000c
SMACCR0 -- : 0x43288071
PROC INIT OK!
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller
rt3xxx-ehci rt3xxx-ehci: new USB bus registered, assigned bus number 1
rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x101c0000
rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller
rt3xxx-ohci rt3xxx-ohci: new USB bus registered, assigned bus number 2
rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x101c1000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
u32 classifier
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (949 buckets, 3796 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
IPv4 over IPv4 tunneling driver
GRE over IPv4 demultiplexor driver
gre: can't add protocol
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Freeing unused kernel memory: 180k freed
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo fraswitch register base addr to system register 0xb0000000
me compressed muwrite offset 0x34, value 0x1800000
lticast|bytes   write offset 0x34, value 0x0
 packets errs drop fiRaeth v3.0 (foNAPI
 c,SkbRecycleol)
ls ca
phy_tx_ring = 0x03fc3000, tx_ring = 0xa3fc3000

phy_rx_ring0 = 0x03fc4000, rx_ring0 = 0xa3fc4000

 0x5,Read PhyID is 0x243 ,0xd91!!
SMACCR1 -- : 0x0000000c
SMACCR0 -- : 0x43288071
rrCDMA_CSG_CFG = 81000000
ieGDMA1_FWD_CFG = 20710000
r compressed
    lo:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  eth2:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
 tunl0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  gre0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
  sit0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
ip6tnl0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0
 flash_open: flash_fd=3
Mount D Section.
mount: /dev/mtdblock5 is write-protected, mounting read-only
 flash_open: flash_fd=9
switch register base addr to system register 0xb0000000
write offset 0x60, value 0x40a01d
addrconf_dad_completed 7
switch reg write offset=2004, value=ff0003
switch reg write offset=2104, value=ff0003
switch reg write offset=2204, value=ff0003
switch reg write offset=2304, value=ff0003
switch reg write offset=2404, value=ff0003
switch reg write offset=2504, value=ff0003
switch reg write offset=2010, value=810000c0
switch reg write offset=2110, value=810000c0
switch reg write offset=2210, value=810000c0
switch reg write offset=2310, value=810000c0
switch reg write offset=2410, value=810000c0
switch reg write offset=2510, value=810000c0
switch reg write offset=2610, value=81000000
switch reg write offset=2710, value=81000000
switch reg write offset=2604, value=20ff0003
switch reg write offset=2704, value=20ff0003
switch reg write offset=2014, value=10002
switch reg write offset=2114, value=10001
switch reg write offset=2214, value=10001
switch reg write offset=2314, value=10001
switch reg write offset=2414, value=10001
switch reg write offset=2514, value=10002
rmmod: hw_nat: No such file or directory
ifconfig: SIOCGIFFLAGS: No such device
bridge brx0 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx1 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx2 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx3 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx4 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx5 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx6 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx7 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx8 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx9 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx10 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx11 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx12 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx13 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx14 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx15 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx16 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx17 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx18 doesn't exist; can't delete it
ifconfig: SIOCGIFFLAGS: No such device
bridge brx19 doesn't exist; can't delete it
sh: ebtables: not found
sh: ebtables: not found
sh: ebtables: not found
sh: ebtables: not found
iptables v1.4.10: Couldn't load target `block_br':File not found

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables v1.4.10: Couldn't load target `block_br_input':File not found

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
sh: ebtables: not found
sh: ebtables: not found
sh: ebtables: not found
sh: ebtables: not found
vconfig: ioctl error for add: File exists
vconfig: ioctl error for add: File exists
Set port eth2.1.0 
vconfig: ioctl error for add: File exists
device eth2 entered promiscuous mode
set hello timer failed: Invalid argument
device eth2.1 entered promiscuous mode
br0: port 1(eth2.1) entering forwarding state
br0: port 1(eth2.1) entering forwarding state
sh: ebtables: not found
Set port eth2.2.0 
vconfig: ioctl error for add: File exists
Set port eth2.2.0 
vconfig: ioctl error for add: File exists
, Enable: 1
Wireless 5G AP0, Enable: 1
phy 0, reg 0, val 0x800
Set: phy[0].reg[0] = 0800
phy 1, reg 0, val 0x800
Set: phy[1].reg[0] = 0800
phy 2, reg 0, val 0x800
Set: phy[2].reg[0] = 0800
phy 3, reg 0, val 0x800
Set: phy[3].reg[0] = 0800
phy 4, reg 0, val 0x800
Set: phy[4].reg[0] = 0800
phy 5, reg 0, val 0x800
Set: phy[5].reg[0] = 0800
phy 6, reg 0, val 0x800
Set: phy[6].reg[0] = 0800
sh: ebtables: not found
sh: ebtables: not found
sh: ebtables: not found
sh: ebtables: not found
brctl addif br0 ra0
interface ra0 does not exist!
brctl addif br0 rai0
interface rai0 does not exist!
hw_nat: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
Ralink HW NAT Module Enabled
phy 0, reg 0, val 0x3300
Set: phy[0].reg[0] = 3300
addrconf_dad_completed 7
phy 1, reg 0, val 0x3300
Set: phy[1].reg[0] = 3300
addrconf_dad_completed 7
addrconf_dad_completed 7
phy 2, reg 0, val 0x3300
Set: phy[2].reg[0] = 3300
phy 3, reg 0, val 0x3300
Set: phy[3].reg[0] = 3300
phy 4, reg 0, val 0x3300
Set: phy[4].reg[0] = 3300
phy 5, reg 0, val 0x3300
Set: phy[5].reg[0] = 3300
phy 6, reg 0, val 0x3300
Set: phy[6].reg[0] = 3300
init vlan
init lan
init stp
init ondemand
init multiwan2
init multi_ondemand
init routing
init nat
==== NAT START (WAN:ALL Func:ALL) ====
cat: /var/nat/nat.wan: No such file or directory
ESW: Link Status Changed - Port1 Link UP
/var/nat/nat-draft.uyg: /var/nat/nat-draft.uyg: 131: cannot create /proc/sys/net/ipv4/route/secret_interval: Directory nonexistent
SINGLE DMZ start
gre_post
addrconf_dad_completed 7
Using intrapositioned negation (`--option ! this`) is deprecated in favor of extrapositioned (`! --option this`).
modprobe: module ip6_tables not found
modprobe: failed to load module ip6_tables
ip6tables v1.4.10: can't initialize ip6tables table `filter': iptables who? (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
init dhcpsrv
server_config.pool_check = 1

server_config.pool_check = 1

 start = 192.168.0.50, end = 192.168.0.199, lan_ip = 192.168.0.1, interface=br0, ifindex=0

 start = 192.168.0.50, end = 192.168.0.199, lan_ip = 192.168.0.1, interface=br0, ifindex=0

0

Unable to open /var/run/udhcpd.leases for reading
udhcpd (v0.9.9-pre) started
Unable to open /var/run/udhcpd.leases for reading
init dnsrelay
init spap
init ddns
init snmp
init route_protocol
rm: cannot remove '/etc/ripd.conf': No such file or directory
cat: /var/run/ripd.pid: No such file or directory
BusyBox v1.3.2 (2015-12-09 19:52:49 CST) multi-call binary

Usage: kill [-l] [-signal] process-id [process-id ...]

cat: /var/run/zebra.pid: No such file or directory
BusyBox v1.3.2 (2015-12-09 19:52:49 CST) multi-call binary

Usage: kill [-l] [-signal] process-id [process-id ...]

init load_balance
init time
timezone:-60
dsttime:0
init rbydom
init rbyip
init qos
init keepalive
init user
init ftp_alg
init rtsp_alg
init schedule
init mupnpd
init watchdog
init reboot
init wireless_mode
server_config.pool_check = 1

server_config.pool_check = 1

 start = 192.168.0.50, end = 192.168.0.199, lan_ip = 192.168.0.1, interface=br0, ifindex=0

 start = 192.168.0.50, end = 192.168.0.199, lan_ip = 192.168.0.1, interface=br0, ifindex=0

0

udhcpd (v0.9.9-pre) started
init wlanap
Length of MAC:6
 mac:6c:72:20:a5:9e:f8:
----


=== pAd = c0882000, size = 1632152 ===

<-- RTMPAllocTxRxRingMemory, Status=0
<-- RTMPAllocAdapterBlock, Status=0
device_id =0x7650
==>MT76x0_WLAN_ChipOnOff(): OnOff:1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0xff000002
MACVersion = 0x76502000
load fw spent 12ms
RX DESC a2ad2000 size = 2048
RX1 DESC a2ad3000 size = 2048
cfg_mode=14
cfg_mode=14
wmode_band_equal(): Band Not Equal!
2a:55:44:e4:05:1a:cb:eb:01:93:83:88:b2:c3:4f:8f:
50:b2:65:62:c1:a3:cb:f9:52:8e:b0:b1:79:c9:b6:97:

1. Phy Mode = 49
2. Phy Mode = 49
ext_pa_current_setting = 1
3. Phy Mode = 49
AntCfgInit: primary/secondary ant 0/1
ChipStructAssign(): RALINK6590 hook !
MCS Set = ff 00 00 00 01
MT76x0_ChipBBPAdjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42
APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2)
Main bssid = 6c:72:20:a5:9e:f8
<==== rt28xx_init, Status=0
MT76x0_ChipBBPAdjust():rf_bw=2, ext_ch=1, PrimCh=44, HT-CentCh=46, VHT-CentCh=42
APStartUp(): AP Set CentralFreq at 42(Prim=44, HT-CentCh=46, VHT-CentCh=42, BBP_BW=2)
0x1300 = 00064300
RTMPDrvOpen(1):Check if PDMA is idle!
RTMPDrvOpen(2):Check if PDMA is idle!
device rai0 entered promiscuous mode
br0: port 2(rai0) entering forwarding state
br0: port 2(rai0) entering forwarding state
killall: check_status2: no process killed
route: SIOC[ADD|DEL]RT: No such device
wscd: SSDP UDP PORT = 1900
Invalid command : ledflashstop
device wdsi0 is not a slave of br0
device wdsi1 is not a slave of br0
device wdsi2 is not a slave of br0
device wdsi3 is not a slave of br0
device rai0 left promiscuous mode
br0: port 2(rai0) entering forwarding state
==>MT76x0_WLAN_ChipOnOff(): OnOff:0, pAd->WlanFunCtrl:0xff000003, Reg-WlanFunCtrl=0xff000003
init wps_status
init wps_btn
init wpa
init ipv6
init v6filter
modprobe: module ip6_tables not found
modprobe: failed to load module ip6_tables
modprobe: module ip6table_filter not found
modprobe: failed to load module ip6table_filter
modprobe: module ip6table_mangle not found
modprobe: failed to load module ip6table_mangle
modprobe: module ip6t_rt not found
modprobe: failed to load module ip6t_rt
modprobe: module ip6t_REJECT not found
modprobe: failed to load module ip6t_REJECT
init ddnsv6
init hwnat
init 3g_status
init sip_alg
init igmp
init reset_btn
init ate
killall: ated: no process killed
init wan_led
init recent
init httpd
init telnetd
/usr/bin/telnetd-action: Don't Start telnetd since CSID is set disable ...
/usr/bin/ataskset: /usr/bin/ataskset: 6: taskset: not found
/usr/bin/telnetd-action start ok
 flash_open: flash_fd=4
 flash_open: flash_fd=4
 framtd_erase: addr:ff0000 len:0
lash_open: flash_fd=9
ramtd_write: to:ff0000 len:10
ramtd_write: to:ff0010 len:58e
ramtd_write: to:ff0000 len:1
 flash_open: flash_fd=4
addrconf_dad_completed 7
# Length of MAC:6
 mac:6c:72:20:a5:9e:f7:
----


=== pAd = c11c6000, size = 960336 ===

<-- RTMPAllocTxRxRingMemory, Status=0
<-- RTMPAllocAdapterBlock, Status=0
AP Driver version-2.7.1.6
RX DESC a29d6000  size = 2048
RTMP_TimerListAdd: add timer obj c1231638!
RTMP_TimerListAdd: add timer obj c11ce23c!
RTMP_TimerListAdd: add timer obj c11cde30!
RTMP_TimerListAdd: add timer obj c11ce20c!
RTMP_TimerListAdd: add timer obj c11ce548!
RTMP_TimerListAdd: add timer obj c11ce488!
RTMP_TimerListAdd: add timer obj c11ce4b8!
RTMP_TimerListAdd: add timer obj c11d1648!
RTMP_TimerListAdd: add timer obj c11d123c!
RTMP_TimerListAdd: add timer obj c11d1618!
RTMP_TimerListAdd: add timer obj c11d1954!
RTMP_TimerListAdd: add timer obj c11d1894!
RTMP_TimerListAdd: add timer obj c11d18c4!
RTMP_TimerListAdd: add timer obj c11d4a54!
RTMP_TimerListAdd: add timer obj c11d4648!
RTMP_TimerListAdd: add timer obj c11d4a24!
RTMP_TimerListAdd: add timer obj c11d4d60!
RTMP_TimerListAdd: add timer obj c11d4ca0!
RTMP_TimerListAdd: add timer obj c11d4cd0!
RTMP_TimerListAdd: add timer obj c11d7e60!
RTMP_TimerListAdd: add timer obj c11d7a54!
RTMP_TimerListAdd: add timer obj c11d7e30!
RTMP_TimerListAdd: add timer obj c11d816c!
RTMP_TimerListAdd: add timer obj c11d80ac!
RTMP_TimerListAdd: add timer obj c11d80dc!
RTMP_TimerListAdd: add timer obj c11db26c!
RTMP_TimerListAdd: add timer obj c11dae60!
RTMP_TimerListAdd: add timer obj c11db23c!
RTMP_TimerListAdd: add timer obj c11db578!
RTMP_TimerListAdd: add timer obj c11db4b8!
RTMP_TimerListAdd: add timer obj c11db4e8!
RTMP_TimerListAdd: add timer obj c11de678!
RTMP_TimerListAdd: add timer obj c11de26c!
RTMP_TimerListAdd: add timer obj c11de648!
RTMP_TimerListAdd: add timer obj c11de984!
RTMP_TimerListAdd: add timer obj c11de8c4!
RTMP_TimerListAdd: add timer obj c11de8f4!
RTMP_TimerListAdd: add timer obj c11e1a84!
RTMP_TimerListAdd: add timer obj c11e1678!
RTMP_TimerListAdd: add timer obj c11e1a54!
RTMP_TimerListAdd: add timer obj c11e1d90!
RTMP_TimerListAdd: add timer obj c11e1cd0!
RTMP_TimerListAdd: add timer obj c11e1d00!
RTMP_TimerListAdd: add timer obj c11e4e90!
RTMP_TimerListAdd: add timer obj c11e4a84!
RTMP_TimerListAdd: add timer obj c11e4e60!
RTMP_TimerListAdd: add timer obj c11e519c!
RTMP_TimerListAdd: add timer obj c11e50dc!
RTMP_TimerListAdd: add timer obj c11e510c!
RTMP_TimerListAdd: add timer obj c11e829c!
RTMP_TimerListAdd: add timer obj c11e7e90!
RTMP_TimerListAdd: add timer obj c11e826c!
RTMP_TimerListAdd: add timer obj c11e85a8!
RTMP_TimerListAdd: add timer obj c11e84e8!
RTMP_TimerListAdd: add timer obj c11e8518!
RTMP_TimerListAdd: add timer obj c11eb6a8!
RTMP_TimerListAdd: add timer obj c11eb29c!
RTMP_TimerListAdd: add timer obj c11eb678!
RTMP_TimerListAdd: add timer obj c11eb9b4!
RTMP_TimerListAdd: add timer obj c11eb8f4!
RTMP_TimerListAdd: add timer obj c11eb924!
RTMP_TimerListAdd: add timer obj c11eeab4!
RTMP_TimerListAdd: add timer obj c11ee6a8!
RTMP_TimerListAdd: add timer obj c11eea84!
RTMP_TimerListAdd: add timer obj c11eedc0!
RTMP_TimerListAdd: add timer obj c11eed00!
RTMP_TimerListAdd: add timer obj c11eed30!
RTMP_TimerListAdd: add timer obj c11f1ec0!
RTMP_TimerListAdd: add timer obj c11f1ab4!
RTMP_TimerListAdd: add timer obj c11f1e90!
RTMP_TimerListAdd: add timer obj c11f21cc!
RTMP_TimerListAdd: add timer obj c11f210c!
RTMP_TimerListAdd: add timer obj c11f213c!
RTMP_TimerListAdd: add timer obj c11f52cc!
RTMP_TimerListAdd: add timer obj c11f4ec0!
RTMP_TimerListAdd: add timer obj c11f529c!
RTMP_TimerListAdd: add timer obj c11f55d8!
RTMP_TimerListAdd: add timer obj c11f5518!
RTMP_TimerListAdd: add timer obj c11f5548!
RTMP_TimerListAdd: add timer obj c11f86d8!
RTMP_TimerListAdd: add timer obj c11f82cc!
RTMP_TimerListAdd: add timer obj c11f86a8!
RTMP_TimerListAdd: add timer obj c11f89e4!
RTMP_TimerListAdd: add timer obj c11f8924!
RTMP_TimerListAdd: add timer obj c11f8954!
RTMP_TimerListAdd: add timer obj c11fbae4!
RTMP_TimerListAdd: add timer obj c11fb6d8!
RTMP_TimerListAdd: add timer obj c11fbab4!
RTMP_TimerListAdd: add timer obj c11fbdf0!
RTMP_TimerListAdd: add timer obj c11fbd30!
RTMP_TimerListAdd: add timer obj c11fbd60!
RTMP_TimerListAdd: add timer obj c11feef0!
RTMP_TimerListAdd: add timer obj c11feae4!
RTMP_TimerListAdd: add timer obj c11feec0!
RTMP_TimerListAdd: add timer obj c11ff1fc!
RTMP_TimerListAdd: add timer obj c11ff13c!
RTMP_TimerListAdd: add timer obj c11ff16c!
RTMP_TimerListAdd: add timer obj c1207fa4!
RTMP_TimerListAdd: add timer obj c12080c0!
RTMP_TimerListAdd: add timer obj c1207fd0!
RTMP_TimerListAdd: add timer obj c11ff52c!
RTMP_TimerListAdd: add timer obj c11cb4cc!
RTMP_TimerListAdd: add timer obj c11ce8d8!
RTMP_TimerListAdd: add timer obj c11d1ce4!
RTMP_TimerListAdd: add timer obj c11d50f0!
RTMP_TimerListAdd: add timer obj c11d84fc!
RTMP_TimerListAdd: add timer obj c11db908!
RTMP_TimerListAdd: add timer obj c11ded14!
RTMP_TimerListAdd: add timer obj c11e2120!
RTMP_TimerListAdd: add timer obj c11e552c!
RTMP_TimerListAdd: add timer obj c11e8938!
RTMP_TimerListAdd: add timer obj c11ebd44!
RTMP_TimerListAdd: add timer obj c11ef150!
RTMP_TimerListAdd: add timer obj c11f255c!
RTMP_TimerListAdd: add timer obj c11f5968!
RTMP_TimerListAdd: add timer obj c11f8d74!
RTMP_TimerListAdd: add timer obj c11fc180!
RTMP_TimerListAdd: add timer obj c11ff240!
APSDCapable[0]=0
APSDCapable[1]=0
APSDCapable[2]=0
APSDCapable[3]=0
APSDCapable[4]=0
APSDCapable[5]=0
APSDCapable[6]=0
APSDCapable[7]=0
APSDCapable[8]=0
APSDCapable[9]=0
APSDCapable[10]=0
APSDCapable[11]=0
APSDCapable[12]=0
APSDCapable[13]=0
APSDCapable[14]=0
APSDCapable[15]=0
1. Phy Mode = 9
2. Phy Mode = 9
E2PROM: D0 target power=0xff20 
E2PROM: 40 MW Power Delta= 0 
3. Phy Mode = 9
AntCfgInit: primary/secondary ant 0/1
Initialize RF Central Registers for E2 !!!
Initialize RF Central Registers for E3 !!!
Initialize RF Channel Registers for E2 !!!
Initialize RF Channel Registers for E3 !!!
Initialize RF DCCal Registers for E2 !!!
Initialize RF DCCal Registers for E3 !!!
D1 = 1, D2 = 4, CalCode = 7 !!!
RT6352_Temperature_Init : BBPR49 = 0x1
RT6352_Temperature_Init : TemperatureRef25C = 0xfffffff7
Current Temperature from BBP_R49=0xfffffff7
 TX BW Filter Calibration !!!
 RX BW Filter Calibration !!!
LOFT Calibration Done!
IQCalibration Start!
IQCalibration Done! CH = 0, (gain= d, phase=3e)
IQCalibration Start!
IQCalibration Done! CH = 1, (gain= 0, phase=3d)
TX IQ Calibration Done!
RTMPSetPhyMode: channel is out of range, use first channel=0 
MCS Set = ff ff 00 00 01
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
SYNC - BBP R4 to 20MHz.l
RTMP_TimerListAdd: add timer obj c11ffab4!
Main bssid = 6c:72:20:a5:9e:f7
<==== rt28xx_init, Status=0
0x1300 = 00064380
device ra0 entered promiscuous mode
br0: port 2(ra0) entering forwarding state
br0: port 2(ra0) entering forwarding state
Ralink HW NAT Module Disabled
Ralink APSoC Hardware Watchdog Timer
Started WatchDog Timer.
Started WatchDog Timer. LoadVlaue: 36600 sysclk: 145000000 TIMEOUT: 60
addrconf_dad_completed 7
RTMP_TimerListAdd: add timer obj c0f88378!
==>MT76x0_WLAN_ChipOnOff(): OnOff:1, pAd->WlanFunCtrl:0xff000000, Reg-WlanFunCtrl=0xff000000
MACVersion = 0x76502000
load fw spent 0ms
RX DESC a2ad2000 size = 2048
RX1 DESC a2ad3000 size = 2048
ramtd_erase: addr:ff0000 len:0
cfg_mode=14
cfg_mode=14
wmode_band_equal(): Band Not Equal!
2a:55:44:e4:05:1a:cb:eb:01:93:83:88:b2:c3:4f:8f:
50:b2:65:62:c1:a3:cb:f9:52:8e:b0:b1:79:c9:b6:97:

ramtd_write: to:ff0000 len:10
ramtd_write: to:ff0010 len:590
ramtd_write: to:ff0000 len:1
1. Phy Mode = 49
2. Phy Mode = 49
ext_pa_current_setting = 1
3. Phy Mode = 49
AntCfgInit: primary/secondary ant 0/1
ChipStructAssign(): RALINK6590 hook !
MCS Set = ff 00 00 00 01
MT76x0_ChipBBPAdjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42
APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2)
Main bssid = 6c:72:20:a5:9e:f8
<==== rt28xx_init, Status=0
MT76x0_ChipBBPAdjust():rf_bw=2, ext_ch=1, PrimCh=44, HT-CentCh=46, VHT-CentCh=42
APStartUp(): AP Set CentralFreq at 42(Prim=44, HT-CentCh=46, VHT-CentCh=42, BBP_BW=2)
0x1300 = 00064300
RTMPDrvOpen(1):Check if PDMA is idle!
RTMPDrvOpen(2):Check if PDMA is idle!
device rai0 entered promiscuous mode
br0: port 3(rai0) entering forwarding state
br0: port 3(rai0) entering forwarding state
addrconf_dad_completed 7

/proc/mtd[edit]

/proc/mtd • >>
dev:    size   erasesize  name
mtd0: 00010000 00001000 "jboot"
mtd1: 00fe0000 00001000 "firmware"
mtd2: 0017dea6 00001000 "kernel"
mtd3: 00e6215a 00001000 "rootfs"
mtd4: 008d6000 00001000 "rootfs_data"
mtd5: 00010000 00001000 "config"

mount[edit]

mount • >>
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/mtdblock4 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
mountd(pid1581) on /tmp/run/blockd type autofs (rw,relatime,fd=7,pgrp=1,timeout=30,minproto=5,maxproto=5,indirect)


Images[edit]

Zuzia's images: