WikiDevi will be going offline 2019-10-31. For historical dumps of the database, see 'WikiDevi' @ the Internet Archive (MW XML, Files, Images).
Final dumps will be made available after the site goes offline.
There is no chance the data will not live on, in some form - even if it isn't 'WikiDevi' anymore. For example, see TechInfoDepot.

D-Link DIR-810L rev B1

From WikiDevi
Jump to: navigation, search

D-Link DIR-810L B1
Availability: now

Manuf/OEM/ODM Cameo

FCC approval date: 05 March 2013
(Est.) release date: 11 April 2013
UPC: 790069390296 (UPC DB, On eBay)
Country of manuf.: China

Amazon image

ASIN
B00C9V0OBI (Flag of the United States.svg, On Amazon, On CCCmultiple uses)
multiple revisions of this device, use caution

Type: wireless router

FCC ID: KA2IR810LB1
Industry Canada ID: 4216A-IR810LB1

Power: 12 VDC, 1 A
Connector type: barrel

CPU1: MediaTek MT7620A (580 MHz)
FLA1: 8 MiB
8,388,608 B
65,536 Kib
8,192 KiB
64 Mib
0.00781 GiB
(Macronix MX25L6406EM2I-12G)
RAM1: 64 MiB
67,108,864 B
524,288 Kib
65,536 KiB
512 Mib
0.0625 GiB
(ESMT M14D5121632A-2.5B)

Expansion IFs: none specified
Serial: yes, 4-pad header, J1, (57600,8,N,1)

WI1 chip1: MediaTek MT7620A
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: MediaTek MT7610E
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 1x1:1
WI2 antenna connector: U.FL

ETH chip1: MediaTek MT7620A
Switch: MediaTek MT7620A
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

abgn+ac

Third party firmware supported: OpenWrt

Default SSID: dlink-XXXX (33 addl. devices), dlink-XXXX-5GHz (5 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 738 additional devices
of which 209 are D-Link devices
Default login user: Admin
Default login password: blank
Admin:blank credentials used by 81 additional devices
of which 77 are D-Link devices

802dot11 OUI: 6C:19:8F (2 E, -, 2013)
Ethernet OUI: 6C:19:8F (2 E, -, 2013)

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.


Wireless AC750 Dual Band Cloud Router

PCB rev B1 image

Boot Log[edit]

boot log
U-Boot 1.1.3 (Jun 10 2014 - 18:41:01)

Board: Ralink APSoC DRAM:  64 MB
relocate_code Pointer at: 83f98000
enable ephy clock...done. rf reg 29 = 5
SSC disabled.
spi_wait_nsec: 29
spi device id: c2 20 17 c2 20 (2017c220)
find flash: MX25L6405D

MAC: 6c:19:8f:ed:f0:f6
==============================
Ralink UBoot Version: 4.1.1.0
DIR-810L(1.00b03)
------------------------------
ASIC 7620_MP (Port5<->None)
DRAM component: 512 Mbits DDR, width 16
DRAM bus: 16 bit
Total memory: 64 MBytes
Flash component: SPI Flash
Date:Jun 10 2014  Time:18:41:01
============================================
icache: sets:512, ways:4, linesz:32 ,total:65536
dcache: sets:256, ways:4, linesz:32 ,total:32768

 ##### The CPU freq = 580 MHZ ####
 estimate memory size =64 Mbytes

3: System Boot system code via Flash.
## Booting image at bc170000 ...
   Image Name:   Linux Kernel Image
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    6047003 Bytes =  5.8 MB
   Load Address: 80000000
   Entry Point:  8000c2d0
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 8000c2d0)
## Giving linux memsize in MB, 64

Starting kernel ...
LINUX started...

 THIS IS ASIC
init started: BusyBox v1.12.1 (2014-06-11 14:51:50 CST)
starting pid 35, tty '': '/etc_ro/rcS'
mount: mounting none on /proc/bus/usb failed: No such file or directory
Welcome to
    _______  _______  ___     __  ____   _  _   ___
    |  ___  \|   __  ||   |   |__||    \ | || | /  /
    | |___| ||  |__| ||   |__  __ |     \| || |/  /
    |   _   /|   _   ||      ||  || |\     ||     \
    |__| \__\|__| |__||______||__||_| \____||_|\___\

                     =System Architecture Department=

mount mydlink ok
mount flash ok
old language pack not found
language pack exists
Starting loop GPIO LED=9,PBC=2
Waiting for Wireless Events from interfaces...
[    leobox_ipc.c:  207       sem_create()]:::add semid = 0
[    leobox_ipc.c:  207       sem_create()]:::add semid = 32769
[    leobox_ipc.c:  207       sem_create()]:::add semid = 65538
[    leobox_ipc.c:  207       sem_create()]:::add semid = 98307
[    leobox_ipc.c:  207       sem_create()]:::add semid = 131076
[    leobox_ipc.c:  207       sem_create()]:::add semid = 163845
[    leobox_ipc.c:  207       sem_create()]:::add semid = 196614
[    leobox_ipc.c:  207       sem_create()]:::add semid = 229383
[    leobox_ipc.c:  207       sem_create()]:::add semid = 262152
[    leobox_ipc.c:  207       sem_create()]:::add semid = 294921
[    leobox_ipc.c:  207       sem_create()]:::add semid = 327690
[    leobox_ipc.c:  207       sem_create()]:::add semid = 360459
[    leobox_ipc.c:  207       sem_create()]:::add semid = 393228
[    leobox_ipc.c:  207       sem_create()]:::add semid = 425997
[    leobox_ipc.c:  207       sem_create()]:::add semid = 458766
[    leobox_ipc.c:  207       sem_create()]:::add semid = 491535
[    leobox_ipc.c:  207       sem_create()]:::add semid = 524304
[    leobox_ipc.c:  207       sem_create()]:::add semid = 557073
[    leobox_ipc.c:  207       sem_create()]:::add semid = 589842
[    leobox_ipc.c:  207       sem_create()]:::add semid = 622611
[    leobox_ipc.c:  207       sem_create()]:::add semid = 655380
[  122 ncc_main.c          :  177             main()]
:::[122]Thread Create[main thread]
[  122 ncc_runtimecfg.c    :  538   initRunTimeCfg()]
:::Init Run-Time Config Success.
[  122 ncc_runtimecfg.c    :  539   initRunTimeCfg()]
:::Total 4470 nodes, each node 24 bytes.
[  122 ncc_runtimecfg.c    :  540   initRunTimeCfg()]
:::Total 107280 byte for all nodes.
[  122 ncc_runtimecfg.c    :  541   initRunTimeCfg()]
:::Total 68493 byte for data.
[  122 ncc_runtimecfg.c    :  207          loadCfg()]
:::Start loadCfg
[  122 ncc_lz77.c          :  534     flash2rootfs()]
:::Load Success(/var/tmp/cfg.txt)
[  122 ncc_runtimecfg.c    :  990  setObjToDefault()]
:::set IGD_FirmwareStatus_[1,1,0,0,0] to default
/etc_ro/rcS: line 163: mp.sh: not found
starting pid 140, tty '/dev/ttyS1': '/bin/sh'
# [  122 ncc_inf.c           : 1132     ncc_inf_main()]
:::JTraceLevel=4
[  122 leobox_network.c    : 1083    socket_select()]
:::Enter pid=122,ppid=1
[leobox_network.c: 1093    socket_select()]
:::main process get thread id=1026
[  142 leobox_network.c    :  835 socket_select_hdlr()]
:::[142]Thread Create[socket_select_hdlr]
[  143 ncc_inf.c           :  959       processInf()]
:::[143]Thread Create[processInf]
================nice=-20
bind: Address already in use
[  122 ncc_main.c          :  269             main()]
:::Stop Web Access HTTP
[  122 ncc_httpd.c         :  539          httpdOp()]
:::st is null.
[  122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 5095 
probeHTTPsEnable()]:::probeHTTPsEnable();
[  122 ncc_main.c          :  291             main()]
:::Start HTTPS
mini_httpd: started as root without requesting chroot(), warning only
sh: cannot create /sys/class/net/br0/bridge/tcp_allow: nonexistent directory
bind: Address already in use
[  122 ncc_main.c          :  305             main()]
:::Stop Web Access HTTPS
[  122 ncc_httpd.c         :  539          httpdOp()]
:::st is null.
mini_httpd: started as root without requesting chroot(), warning only
[  157 leobox_timer.c      :  235      timerThread()]
:::[157]Thread Create[timerThread]
[  157 leobox_timer.c      :  243      timerThread()]
:::Timer Thread Running
[  158 ncc_main.c          :   41    sendBootEvent()]
:::[158]Thread Create[sendBootEvent]
sh: cannot create /proc/sys/net/ipv4/conf/eth2.2/arp_ignore: 
nonexistent directory
[  122 ncc_fsm_boot.c      :  513             Boot()]:::=====================Start DIR_810_Boot=====================
[  122 ncc_fsm_boot.c      :  570             Boot()]:::MAC 0 = 6C198FEDF0F6
[  122 ncc_fsm_boot.c      :  571             Boot()]:::MAC 1 = 6C198FEDF0F7
switch reg write offset=3100, value=56330
switch reg write offset=3200, value=56330
switch reg write offset=3300, value=56330
switch reg write offset=3400, value=56330
switch reg write offset=3000, value=56330
Set: phy[4].reg[4] = 05e1
Set: phy[4].reg[0] = 3300
[  122 ncc_l2_independence.c:  171       swSpeedSet()]:::port = 4, speed = 0
killall: crond: no process killed
[  122 ncc_crond.c         :   54        crondConf()]:::DEBUG ON
REG_ESW_WT_MAC_ATC is 0x7ff0002
done.
[  122 ncc_firewall.c      : 1572      reBuildMAC6()]:::reBuildMAC6()+
REG_ESW_WT_MAC_ATC is 0x7ff0002
done.
[  122 ncc_firewall.c      : 1621      reBuildMAC6()]:::reBuildMAC6()-
ip6tables: No chain/target/match by that name.
[  122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 8098 
probeFirewall6_SimpSec()]:::>>probeFirewall6_SimpSec
[  122 ncc_objAction.c     : 2609 reflash_IGD_Status_IPv6Status_()]
:::get iface eth2.2
[  122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 8175 
probeFirewall6_SimpSec()]:::<<probeFirewall6_SimpSec 
readInfo(InfoV6AutoDetectWanType):0
[  122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 8215 
probeFirewall6_SimpSec()]:::<<probeFirewall6_SimpSec
[  122 ncc_firewall.c      : 2236 reBuildFirewall6CPE()]:::
[Bernie debug]:tmpPreiapd =
[  122 ncc_firewall.c      : 2237 reBuildFirewall6CPE()]:::
[Bernie debug]: prepare set cpe-dynamic rule
[  122 ncc_objAction.c     : 2609 reflash_IGD_Status_IPv6Status_()]
:::get iface eth2.2
killall: wakeOnLanProxy: no process killed
[  122 ncc_firewall.c      : 4978      runFwScript()]:::===ipt run start===
[  122 ncc_firewall.c      : 4980      runFwScript()]:::===ipt run end===
[SYS][  122 ncc_firewall.c      : 5572         nfOpFunc()]
:::[nfOpFunc]Finish nf_init, 0
[  122 ncc_fsm_boot.c      :  780             Boot()]:::cfg->tzone=-128
Sat Jan  1 00:00:00 GMT 2011
[  122 ncc_fsm_boot.c      :  806             Boot()]:::Merge language pack!!
[ 4370 lang_merge.c        : 1153             main()]:::before print info
[ 4370 lang_merge.c        : 1156             main()]:::Parameters:
 ori_lang_fp: /var/tmp/lang.js
 def_lang_fp: /www/def_lang.js
[ 4370 lang_merge.c        : 1234             main()]:::save to old js file!!
[ 4370 lang_merge.c        : 1235             main()]:::save to old js file!!
[ 4370 lang_merge.c        : 1236             main()]:::save to old js file!!
sh: cannot create /proc/sys/net/ipv6/conf/ra1/disable_ipv6: nonexistent directory
sh: cannot create /proc/sys/net/ipv6/conf/rai1/disable_ipv6: nonexistent directory
[  122 ncc_status.c        : 1211     delIfaceInfo()]:::delIfaceInfo()+:iface:br0
[  122 ncc_routerlan.c     :   37 attachWanDomainName()]:::Get wan interface fail!!
[  122 ncc_routerlan.c     :   37 attachWanDomainName()]:::Get wan interface fail!!
[  122 ncc_help.c          : 1599      checkDefCfg()]:::defCfg=1
llmnr: have no available linklocal address. wait count=0
[  122 ncc_firewall.c      : 4978      runFwScript()]:::===ipt run start===
[  122 ncc_firewall.c      : 4980      runFwScript()]:::===ipt run end===
[SYS][  122 ncc_firewall.c      : 5572         nfOpFunc()]:::[nfOpFunc]Finish nf_redirect_to_index_on, 47
[  122 ncc_firewall.c      : 4978      runFwScript()]:::===ipt run start===
llmnr: have no available linklocal address. wait count=1
[  122 ncc_firewall.c      : 4980      runFwScript()]:::===ipt run end===
[SYS][  122 ncc_firewall.c      : 5572         nfOpFunc()]:::[nfOpFunc]Finish nf_lan_up, 3
[  122 ncc_help.c          : 1599      checkDefCfg()]:::defCfg=1
[  122 ncc_mdns.c          :  173         mdnsConf()]:::hnf=0
llmnr: have no available linklocal address. wait count=2
invalid option in file /var/tmp/upnpd_wan.conf line 2 : int_ifname=br0
invalid option in file /var/tmp/upnpd_wan.conf line 14 : wps_enable=1
Jan  1 00:00:06 miniupnpd[6375]: could not open lease file: 
/tmp/upnp_rdr_list
Jan  1 00:00:06 miniupnpd[6375]: HTTP listening on port 65530
No IPv6 address found for interface br0.
Jan  1 00:00:06 miniupnpd[6375]: no HTTP IPv6 address
Jan  1 00:00:06 miniupnpd[6375]: [truncated] m
Jan  1 00:00:06 miniupnpd[6375]: [truncated] m
Jan  1 00:00:06 miniupnpd[6375]: [truncated] m
Jan  1 00:00:06 miniupnpd[6375]: [truncated] m
Jan  1 00:00:06 miniupnpd[6375]: [truncated] m
Jan  1 00:00:06 miniupnpd[6375]: [truncated] m
Jan  1 00:00:06 miniupnpd[6375]: [truncated] m
Jan  1 00:00:06 miniupnpd[6375]: [truncated] m
Jan  1 00:00:06 miniupnpd[6375]: [truncated] m
Jan  1 00:00:06 miniupnpd[6375]: [truncated] m
Jan  1 00:00:06 miniupnpd[6375]: [truncated] m
Jan  1 00:00:06 miniupnpd[6375]: [truncated] m
Jan  1 00:00:06 miniupnpd[6375]: [truncated] m
Jan  1 00:00:06 miniupnpd[6375]: [truncated] m
mDNSResponderPosix: Starting in daemon mode
killall: lld2d: no process killed

***** g_wl_interface = ra0 ******

killall: proxy: no process killed
[    leobox_ipc.c:  207       sem_create()]:::add semid = 688149
[ 6392 lanmapd.c           : 2648             main()]
:::=======Lanmapd=====
[ 6392 lanmapd.c           : 2649             main()]:::iface br0
[ 6392 lanmapd.c           : 2650             main()]:::ip 192.168.0.1
[ 6392 lanmapd.c           : 2652             main()]:::ipAlias 192.168.0.1
[ 6392 lanmapd.c           : 2654             main()]:::netmask 255.255.255.0
[ 6392 lanmapd.c           : 2655             main()]:::network id 192.168.0.0
[ 6392 lanmapd.c           : 2656             main()]:::mac 6c:19:8f:ed:f0:f6
[ 6392 lanmapd.c           : 2657             main()]:::hostname dlinkrouter
[ 6392 lanmapd.c           : 2658             main()]:::hostname encode
 EEEMEJEOELFCEPFFFEEFFCCACACACAAA
[ 6392 lanmapd.c           : 2660             main()]:::aliasname shareport
[ 6392 lanmapd.c           : 2661             main()]:::aliasname encode
FDEIEBFCEFFAEPFCFECACACACACACAAA
[ 6392 lanmapd.c           : 2663             main()]:::========================
llmnr: have no available linklocal address. wait count=3
killall: crond: no process killed
killall: wscd: no process killed
Starting loop GPIO LED=9,PBC=2
[  122 ncc_fsm_boot.c      :  307  doRtInit()]
:::Send Event to open 2.4G Wlan !
[  122 ncc_EventInternal.c :  253   wlanSchedCheck()]:::no sched
llmnr: have no available linklocal address. wait count=4
llmnr: have no available linklocal address. wait count=5
llmnr: have no available linklocal address. wait count=6
llmnr: have no available linklocal address. wait count=7
llmnr: have no available linklocal address. wait count=8
llmnr: have no available linklocal address. wait count=9
[  122 ncc_fsm_boot.c      :  312         doRtInit()]
:::Send Event to open 5G Wlan !
[  122 ncc_EventInternal.c :  253   wlanSchedCheck()]:::no sched
llmnr: have no available linklocal address. wait count=10
llmnr: have no available linklocal address. wait count=11
llmnr: have no available linklocal address. wait count=12
Starting loop GPIO LED=9,PBC=2
llmnr: have no available linklocal address. wait count=13
killall: wscd: no process killed
route: ioctl 0x890b failed: File exists
libupnp: using UDP SSDP_PORT = 1900
brctl: bridge br0: Device or resource busy
brctl: bridge br0: Device or resource busy
[  122 ncc_fsm_boot.c      :  923      Boot()]:::wanCableLink = 0
[  122 ncc_help.c          : 1599      checkDefCfg()]:::defCfg=1
[  122 ncc_mdns.c          :  173         mdnsConf()]:::hnf=0
mDNSResponderPosix: Starting in daemon mode
[  122 ncc_dev_independence.c: 3892        devOpFunc()]:::get internet_cable_lose
[  122 ncc_firewall.c      : 4978      runFwScript()]:::===ipt run start===
[  122 ncc_firewall.c      : 4980      runFwScript()]:::===ipt run end===
[SYS][  122 ncc_firewall.c      : 5572         nfOpFunc()]
:::[nfOpFunc]Finish nf_80_to_404_on, 38
[  122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 8069 probeULA()]:::probeULA
[  122 ncc_help.c          : 2307 copy_mac_to_eui64()]:::v6id:6e19:8fff:feed:f0f6,
[  122 ncc_help.c          : 2191    read_ipv6addr()]
::: family : 10, prefixlen : 64, flags : 192, scope : 253, index : 9
[  122 ncc_help.c          : 2209    read_ipv6addr()]
::: + fe80::6e19:8fff:feed:f0f6
[  122 ncc_help.c          : 2953 generate_default_ULA()]
:::[IPv6 Debug]Get IPv6 Link-local Address :br0 :fe80::6e19:8fff:feed:f0f6!!
[  122 ncc_help.c          : 2996 generate_default_ULA()]
:::Default ULA prefix => fd68:09d9:84e2::
[  122 ncc_status.c        : 1248    delIfaceInfo6()]:::delIfaceInfo6()+:iface:br0
[  122 ncc_status.c        : 1248    delIfaceInfo6()]:::delIfaceInfo6()+:iface:br0
[  122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 8098 
probeFirewall6_SimpSec()]:::>>probeFirewall6_SimpSec
[  122 ncc_objAction.c     : 2609 reflash_IGD_Status_IPv6Status_()]
:::get iface eth2.2
[  122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 8175 probeFirewall6_SimpSec()]
:::<<probeFirewall6_SimpSec readInfo(InfoV6AutoDetectWanType):0
[  122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 8215 probeFirewall6_SimpSec()]
:::<<probeFirewall6_SimpSec
ip6tables: Bad rule (does a matching rule exist in that chain?).
[  122 ncc_objAction.c     : 2609 reflash_IGD_Status_IPv6Status_()]
:::get iface eth2.2
[  122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 6528 probeIPv6Radvd()]
:::cfg->isdomainstatic = FALSE
[  122 /opt/release/rt6856/RT288x_SDK/source/user/wolf/cameo/ncc/..
/model/dlink_810_B/objTools/ncc_objTools.c: 6934 probeIPv6Radvd()]:::MTU: 1500
[  122 ncc_help.c          : 2191    read_ipv6addr()]
::: family : 10, prefixlen : 64, flags : 192, scope : 253, index : 9
[  122 ncc_help.c          : 2209    read_ipv6addr()]
::: + fe80::6e19:8fff:feed:f0f6
[  122 ncc_help.c          : 2953 generate_default_ULA()]
:::[IPv6 Debug]Get IPv6 Link-local Address :br0 :fe80::6e19:8fff:feed:f0f6!!
[  122 ncc_help.c          : 2996 generate_default_ULA()]
:::Default ULA prefix => fd68:09d9:84e2::
[  122 ncc_fsm_boot.c      : 1114             Boot()]:::
llmnr: have no available linklocal address. wait count=14
llmnr: have no available linklocal address. wait count=15
[  122 ncc_help.c          : 1952 is_v6defaultgw_exist()]
:::[IPv6 WARNING] Default GW not Exist.
[  122 ncc_radvd.c         :  114        radvdConf()]
:::MTU: 1500
[  122 ncc_radvd.c         :  143        radvdConf()]
:::IPV6 WARNING: LAN RADVD default lifetime is 0 due to NULL prefix.
[  122 ncc_radvd.c         :  233        radvdConf()]
:::is6rdsunset: 0, prefix:
[  122 ncc_radvd.c         :   70      radvdStart()]:::radvdStart -1
[  122 ncc_dev_v6_independence.c: 3217 devV6OpFunc()]:::pd_hint set IPv6
[  122 ncc_dev_v6_independence.c: 3288      devV6OpFunc()]
:::0:0:0:0:0:0:0:0, 56, 0, 0
[  122 ncc_status.c        : 1248    delIfaceInfo6()]:::delIfaceInfo6()+:iface:br0
[  122 ncc_status.c        : 1273    delIfaceInfo6()]:::delIfaceInfo6()+:match iface:br0
[  122 ncc_status.c        : 1248    delIfaceInfo6()]:::delIfaceInfo6()+:iface:br0
[  122 ncc_objAction.c     : 2609 reflash_IGD_Status_IPv6Status_()]
:::get iface eth2.2
[  122 ncc_fsm_boot.c      : 1299             Boot()]
:::setting v6Lan Host Filter=fe80:0:0:0:6e19:8fff:feed:f0f7!
[  122 ncc_fsm_boot.c      : 1321             Boot()]
:::===finish DIR_810_Boot===
[SYS][  122 ncc_fsm_boot.c      : 1336 Boot()]:::Boot Complate!!
[  122 ncc_EventInternal.c : 1189  doEventInternal()]:::InternalLocalTimeChange
[  122 ncc_EventInternal.c :  501 onMailSchedule()]
:::mailCfg.schedSendEnable ? 0
[  122 ncc_EventInternal.c : 1208  doEventInternal()]:::needSendLog = 0
[  122 ncc_rt5592_wlan.c   : 3083 rt5592_wlan_Stop()]:::kill wscd 2.4g
[  122 ncc_objAction.c     : 2084 ResetWirelessCounter()]:::DEBUG ON
[  122 ncc_EventInternal.c :  253   wlanSchedCheck()]:::no sched
cat: can't open '/var/run/wscd.pid.rai0': No such file or directory
kill: you need to specify whom to kill
rm: cannot remove '/var/run/wscd.pid.rai0': No such file or directory
libupnp: using UDP SSDP_PORT = 1900
brctl: bridge br0: Device or resource busy
brctl: bridge br0: Device or resource busy
Starting loop GPIO LED=9,PBC=2
route: ioctl 0x890b failed: File exists
invalid option in file /var/tmp/upnpd_wan.conf line 2 : int_ifname=br0
invalid option in file /var/tmp/upnpd_wan.conf line 14 : wps_enable=1
libupnp: using UDP SSDP_PORT = 1900
[  122 ncc_rt5592_wlan.c   : 3099 rt5592_wlan_Stop()]:::kill wscd 5g
[  122 ncc_objAction.c     : 2098 ResetWirelessCounter()]:::DEBUG ON
[  122 ncc_EventInternal.c :  253   wlanSchedCheck()]:::no sched
Starting loop GPIO LED=9,PBC=2
route: ioctl 0x890b failed: File exists
invalid option in file /var/tmp/upnpd_wan.conf line 2 : int_ifname=br0
invalid option in file /var/tmp/upnpd_wan.conf line 14 : wps_enable=1

Images[edit]

Serial (UART)[edit]

Header pins were not populated as they appear in the FCC photo.