See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

D-Link DIR-300 rev D1

From WikiDevi
Jump to: navigation, search

D-Link DIR-300 D1
Availability: common

Manuf/OEM/ODM SGE AP699E9N .BT1738-4-DL rev 1.0

FCC approval date: 13 August 2013
Country of manuf.: China

Type: wireless router

FCC ID: KA2IR300D1

Power: 12 VDC, 0.5 A
Connector type: barrel
Conn. measurements: 3.8 mm (OD), 1 mm (ID), 10 mm (LEN)

CPU1: Realtek RTL8196E
FLA1: 4 MiB
4,194,304 B
32,768 Kib
4,096 KiB
32 Mib
0.00391 GiB
(Macronix MX25L3206E)
RAM1: 32 MiB
33,554,432 B
262,144 Kib
32,768 KiB
256 Mib
0.0313 GiB
(EtronTech EM63A165TS-6G)

Expansion IFs: none specified
Serial: yes, 4-pad header, J1

WI1 chip1: Realtek RTL8188ER
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Realtek RTL8196E
Switch: Realtek RTL8196E
LAN speed: 10/100
LAN ports: 4
WAN speed: 10/100
WAN ports: 1

bgn

Default SSID: DIR-300
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 708 additional devices
of which 203 are D-Link devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1165 additional devices
of which 59 are D-Link devices

802dot11 OUI: none specified

For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Regarding third party firmware support, Realtek SoC support in OpenWrt
+ (success) RTL8196C port status. on the OpenWrt Forum
and the Realtek thread on the DD-WRT Forum may be of interest.


N150 Wireless Router

"AP699E9N.BT1738-4-DL" and "REV1.0" appears to

be silkscreened on the board in the FCC photos.

FCC docs state that this FCC ID: KA2IR300D1 also covers:

Serial[edit]

The serial port on board marked "J1". Levels is TTL 3.3V.

Pins: 1 - VCC, 2 - GND, 3 and 4 - Data (Rx and Tx).

Baud rate: 38400 Data bits: 8 Parity: none Stop bits: 1

Images[edit]