WikiDevi will be going offline 2019-10-31. For historical dumps of the database, see 'WikiDevi' @ the Internet Archive (MW XML, Files, Images).
Final dumps will be made available after the site goes offline.
There is no chance the data will not live on, in some form - even if it isn't 'WikiDevi' anymore. For example, see TechInfoDepot.

D-Link DAP-2680 rev A1

From WikiDevi
Jump to: navigation, search

D-Link DAP-2680 A1
Availability: new

Manuf/OEM/ODM Alpha Networks

FCC approval date: 27 February 2018
Country of manuf.: China
Series: AC1750

Type: access point

FCC ID: KA2AP2680A1
Industry Canada ID: 4216A-AP2680A1

Power: 12 VDC, 2 A
Connector type: barrel
Power over Ethernet (PoE) tag: 802.3at, standard

CPU1: Qualcomm Atheros QCA9558 (720 MHz)
FLA1: 16 MiB
16,777,216 B
131,072 Kib
16,384 KiB
128 Mib
0.0156 GiB
(Winbond Model?)
RAM1: 256 MiB
268,435,456 B
2,097,152 Kib
262,144 KiB
2,048 Mib
0.25 GiB
(Winbond W971GG6SB-25 × 2)

Expansion IFs: none specified

WI1 chip1: Qualcomm Atheros QCA9558
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 chip1: Qualcomm Atheros QCA9984
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL

ETH chip1: Qualcomm Atheros QCA9558
LAN speed: 1G
LAN ports: 1

abgn+ac

Additional chips
2.4GHz WLAN/BT FEM;Skyworks;SKY85303-11;SKY11, 85303, 708EA;3;
5GHz RF Front End Module;Qorvo (RFMD);RFFM4552;Q, 4552, ALNF;3;

Default IP address: 192.168.0.50
the IP 192.168.0.50 is used by 63 additional devices
of which 63 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 316 additional devices
of which 180 are D-Link devices

802dot11 OUI: none specified

For a list of all currently documented Qualcomm Atheros chipsets with specifications, see Qualcomm Atheros.


1300 Mbps - 4-stream 802.11ac device (433Mbps per stream),
450 Mbps - max. PHY rate for the 40MHz wide 2.4GHz channel = 1750 Mbps class

Wireless AC1750 Wave 2 Dual-Band PoE Access Point

Only three of the QCA9984's tx/rx chains are actually

implemented so this is 3x3:3 for 5GHz.
See also: D-Link DIR-2680