See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

D-Link DAP-1160 rev A1

From WikiDevi
Jump to: navigation, search

D-Link DAP-1160 A1

Manuf/OEM/ODM Cameo

FCC approval date: 12 February 2007
UPC: 790069303401 (UPC DB, On eBay)
Country of manuf.: China

Amazon image

ASIN
B000VS08QC (Flag of the United States.svg, On Amazon, On CCC)

Type: access point

FCC ID: KA2AP1160A1
Industry Canada ID: 4216A-AP1160

Power: 5 VDC, 2 A
Connector type: barrel

CPU1: Realtek RTL8186
FLA1: 4 MiB
4,194,304 B
32,768 Kib
4,096 KiB
32 Mib
0.00391 GiB
(Macronix MX29LV320CBTC-70G)
RAM1: 16 MiB
16,777,216 B
131,072 Kib
16,384 KiB
128 Mib
0.0156 GiB
(EtronTech EM639165TS-6G)

Expansion IFs: none specified
Serial: yes, 4-pin header, (38400,8,N,1)

WI1 chip1: Realtek RTL8186
WI1 chip2: Realtek RTL8225
WI1 802dot11 protocols: bg
WI1 antenna connector: RP-SMA

ETH chip1: Realtek RTL8186
ETH chip2: Realtek RTL8201CP
ETH chip3: Realtek RTL8201CP
LAN speed: 10/100
LAN ports: 2

bg

Stock FW OS: Linux 2.4.18-MIPS-01.00

Default IP address: 192.168.0.50
the IP 192.168.0.50 is used by 62 additional devices
of which 62 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 314 additional devices
of which 179 are D-Link devices

802dot11 OUI: 00:1E:58 (11 E, 12 W, 2007)
Ethernet OUI: 00:1E:58 (11 E, 12 W, 2007)

For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Regarding third party firmware support, Realtek SoC support in OpenWrt
+ (success) RTL8196C port status. on the OpenWrt Forum
and the Realtek thread on the DD-WRT Forum may be of interest.


Wireless G Access Point
Product page (UK)

Pictures

Listed on Realtek SOC page on linux-mips.org as having 4MB Flash and 16MB RAM.

Wi-Fi Certified (alt.) (as of 02/15/2007)

JTAG[edit]

Located at J2

To make JTAG work, R68 should be added.

UART[edit]

Located at J1 : [Vcc|TX|RX|GND]

Baudrate 38400 8M1

Images[edit]



Logs[edit]


UART1 output test ok
Uart init
mfid=000000c2 devid=000022a8
Found 1 x 4M flash memory

---RealTek(RTL8186)at 2007.07.05-16:20+0800 version 1.4a , CAMEO version v1.00.r06 [16bit](180MHz)
no sys signature at 00010000!
no sys signature at 00020000!
Jump to image start=0x80300000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
early printk enabled 
Determined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
Initial ramdisk at: 0x801aa000 (1015651 bytes)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram console=0 ramdisk_start=0 single
Calibrating delay loop... 179.40 BogoMIPS
Memory: 13244k/16384k available (1533k kernel code, 3140k reserved, 1092k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
check_wait... unavailable.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Serial driver version 6.02 (2003-03-12) with no serial options enabled
ttyS00 at 0x00c3 (irq = 3) is a rtl_uart1
state->flags=00000000
Realtek GPIO Driver for Flash Reload Default
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 5120K size 1024 blocksize
PPP generic driver version 2.4.1
PPP MPPE Compression module registered
RealTek E-Flash System Driver. (C) 2002 RealTek Corp.
Found 1 x 4M Byte MXIC MX29LV320AB at 0xbe000000
RTL8185 driver version 1.14 (2008-02-15)
8186NIC Ethernet driver v0.0.8 (Jan 30, 2007)
eth0: RTL8186-NIC at 0xbd200000, 00:01:02:03:04:05, IRQ 4
eth1: RTL8186-NIC at 0xbd300000, 04:05:06:07:08:09, IRQ 5
Realtek FastPath v1.02
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
ip_conntrack version 2.1 (128 buckets, 1024 max) - 312 bytes per conntrack
PPTP netfilter connection tracking: registered
PPTP netfilter NAT helper: registered
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 991k freed
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 56k freed
mount /proc file system ok!
serial console detected.  Disabling virtual terminals.
init started:  BusyBox v1.00-pre8 (2007.04.16-08:33+0000) multi-call binary


BusyBox v1.00-pre8 (2007.04.16-08:33+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

killall: led_shine.sh: no process killed
killall: pptp.sh: no process killed
killall: pppoe.sh: no process killed
Initialize wlan0 interface
Using wlan script...
Setup BRIDGE interface
killall: syslogd: no process killed
killall: klogd: no process killed
SIOCGIFFLAGS: No such device
bridge br0 doesn't exist; can't delete it
Setup bridge...
device eth0 entered promiscuous mode
br0: topology change detected, propagating
eth0:phy is 8201
SIOCDELRT: No such process
device eth1 entered promiscuous mode
eth1:phy is 8201
SIOCDELRT: No such process
device wlan0 entered promiscuous mode
SIOCDELRT: No such process
device wlan0-vxd entered promiscuous mode
SIOCDELRT: No such process
br0: port 4(wlan0-vxd) entering listening state
br0: port 3(wlan0) entering listening state
br0: port 2(eth1) entering listening state
br0: port 1(eth0) entering listening state
SIOCDELRT: No such process
SIOCDELRT: No such process
SIOCDELRT: No such process
br0: port 4(wlan0-vxd) entering learning state
br0: port 3(wlan0) entering learning state
br0: port 2(eth1) entering learning state
br0: port 1(eth0) entering learning state
Setup Firewall
br0: port 4(wlan0-vxd) entering forwarding state
br0: topology change detected, propagating
br0: port 3(wlan0) entering forwarding state
br0: topology change detected, propagating
br0: port 2(eth1) entering forwarding state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
br0: topology change detected, propagating
auth uses obsolete (PF_INET,SOCK_PACKET)
IEEE 802.1x (WPA) daemon, version 1.7f
IEEE 802.1x (WPA) daemon, version 1.7f
killall: reload: no process killed
br0: bridge ip(c0a80032)!
killall: led_shine.sh: no process killed
killall: dccd: no process killed
killall: watchdog.sh: no process killed
killall: tftpd: no process killed
743
# preset:5ef set:4e7
End ledshine!



Built-in commands:
-------------------
	. : break cd continue eval exec exit export help login newgrp
	read readonly set shift times trap umask wait

#cat /proc/
/proc/1/                /proc/enable_dos        /proc/nat_ipsec 
/proc/2/                /proc/eth_flag          /proc/nat_l2tp 
/proc/3/                /proc/execdomains       /proc/net/
/proc/4/                /proc/fast_l2tp         /proc/partitions 
/proc/5/                /proc/fast_nat          /proc/pptp 
/proc/6/                /proc/fast_pptp         /proc/qos 
/proc/600/              /proc/fdb_max           /proc/rf_switch 
/proc/611/              /proc/filesystems       /proc/rx_pkt_thres 
/proc/622/              /proc/fs/               /proc/self/
/proc/7/                /proc/gpio              /proc/slabinfo 
/proc/708/              /proc/iomem             /proc/stat 
/proc/710/              /proc/ioports           /proc/swaps 
/proc/724/              /proc/kcore             /proc/sys/
/proc/745/              /proc/kmsg              /proc/tty/
/proc/8/                /proc/led_gpiopabdata   /proc/uptime 
/proc/br_igmpsnoop      /proc/load_default      /proc/url_filter 
/proc/bus/              /proc/loadavg           /proc/version 
/proc/cmdline           /proc/locks             /proc/wlan0-vxd/
/proc/cpuinfo           /proc/meminfo           /proc/wlan0/
/proc/devices           /proc/misc              /proc/wlan_iflife 
/proc/dma               /proc/mounts            /proc/wlan_led 
/proc/driver/           /proc/mtd 
#cat /proc/cpuinfo 
system type		: Philips Nino
processor		: 0
cpu model		: R3000 V0.0
BogoMIPS		: 179.40
wait instruction	: no
microsecond timers	: no
tlb_entries		: 64
extra interrupt vector	: no
hardware watchpoint	: no
VCED exceptions		: not available
VCEI exceptions		: not available
ll emulations		: 0
sc emulations		: 0

# cat /proc/version 
Linux version 2.4.18-MIPS-01.00 (root@localhost.localdomain) (gcc version 3.3.3) #2 \A4T 7\A4\EB 15 14:49:34 CST 2009
# cat /proc/meminfo 
        total:    used:    free:  shared: buffers:  cached:
Mem:  14635008 10256384  4378624        0   180224  6979584
Swap:        0        0        0
MemTotal:        14292 kB
MemFree:          4276 kB
MemShared:           0 kB
Buffers:           176 kB
Cached:           6816 kB
SwapCached:          0 kB
Active:           1024 kB
Inactive:         6564 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:        14292 kB
LowFree:          4276 kB
SwapTotal:           0 kB
SwapFree:            0 kB