critical WPA2 vulnerabilities afoot, see KRACK attacks (discussion @ /r/KRaCK, HN, /r/netsec, Slashdot)

Cisco RV340W

From WikiDevi
Jump to: navigation, search

Cisco RV340W
Availability: now

Manuf/OEM/ODM Pegatron

FCC approval date: 11 November 2016
Country of manuf.: China

Type: wireless router


Power: 12 VDC, 2.5 A
Connector type: barrel

CPU1: NXP LS1024A (1.2 GHz, 2 cores)
FLA1: 256 MiB
268,435,456 B
2,097,152 Kib
262,144 KiB
2,048 Mib
0.25 GiB
(Spansion S34ML02G200TFI00)
FLA2: 4 MiB
4,194,304 B
32,768 Kib
4,096 KiB
32 Mib
0.00391 GiB
(Spansion S25FL032PIF)
RAM1: 1 GiB
1,024 MiB
1,073,741,824 B
8,388,608 Kib
1,048,576 KiB
8,192 Mib
(SKhynix H5TQ4G63CFR-RDC × 2)

Expansion IFs: Mini PCIe, USB 2.0
Mini PCIe slots: 2
USB ports: 2
JTAG: yes, 20-pin header
Serial: yes, RJ45

WI1 module: unknown
WI1 module IF: Mini PCIe
WI1 chip1: Broadcom BCM43460
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 module: unknown
WI2 module IF: Mini PCIe
WI2 chip1: Broadcom BCM43465
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 4x4:4
WI2 antenna connector: U.FL

ETH chip1: NXP LS1024A
ETH chip2: Realtek RTL8211F
ETH chip3: Realtek RTL8211F
Switch: Realtek RTL8367RB
LAN speed: 10/100/1000
LAN ports: 4
WAN speed: 10/100/1000
WAN ports: 2


Additional chips
2.4GHz WLAN RF Front End Module ;Skyworks;SE5516;;3;
5GHz WLAN RF Front End Module ;Skyworks;SKY85806-11;;4;

Flags: Dual WAN

Default IP address:
the IP is used by 1026 additional devices
of which 16 are Cisco devices
Default login user: cisco
Default login password: cisco
cisco:cisco credentials used by 12 additional devices
of which 12 are Cisco devices

802dot11 OUI: 5C:50:15 (1 E, 1 W, 2013)
Ethernet OUI: 5C:50:15 (1 E, 1 W, 2013)

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented NXP SoC's with specifications, see NXP.

Dual WAN Gigabit Wireless-AC VPN Router

Product page  • Support page

Default settings are per the FCC manual and label.

A label affixed to the FCC EUT seems to indicate...

Some devices may use a 5C:50:15 (Cisco) OUI
The default SSID pattern may be cisco-XXXX