See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Belkin F9K1009 v1

From WikiDevi
Jump to: navigation, search

Belkin F9K1009 v1

Manuf/OEM/ODM Shenzhen Gongjin Electronics

FCC approval date: 16 April 2014
Country of manuf.: China

Type: wireless router

FCC ID: K7SF9K1009V1

Power: 12 VDC, 0.5 A
Connector type: barrel

CPU1: Realtek Model?
FLA1: ? MiB (Brand? Model?)
RAM1: ? MiB (Brand? Model?)

Expansion IFs: none specified
JTAG: probably
Serial: yes, internal, 4-pin header, 3.3V TTL

WI1 chip1: Realtek RTL8188RE
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Brand? Model?
Switch: Realtek Model?
LAN speed: 10/100
LAN ports: 4
WAN speed: 10/100
WAN ports: 1

bgn

Default SSID: belkin.XXX (19 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 274 additional devices
of which 97 are Belkin devices

802dot11 OUI: 08:86:3B (10 E, 14 W, 2011)
Ethernet OUI: 08:86:3B (10 E, 14 W, 2011)

For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Regarding third party firmware support, Realtek SoC support in OpenWrt
+ (success) RTL8196C port status. on the OpenWrt Forum
and the Realtek thread on the DD-WRT Forum may be of interest.


Wireless N150 Router

"AP699E9NL"<......>" and "REV"<..>"1.0" kind of looks like it's silkscreened on the board in the FCC photos. .. but the photo quality is terrible.

Default settings are per the FCC manual + sample label.

The OUI used (08:86:3B) is per the sample label. The SSID format would seem to be belkin.XXX, but the pattern of the last 3 characters is not known.

Probable included PSU(s)[edit]

The power supply shown in the FCC photos is a Shenzhen Gongjin Electronics S05A12-120A050-P4.

Shenzhen Gongjin Electronics S05A12-120A050-P4 (more)
Input: 100-240 VAC ~ 50/60 Hz, 0.3 A
 Input connector: NEMA 1-15P
Style: medium, horiz.  Manuf. in: China  Eff. level: 5
Output: 12 VDC, 0.5 A
 Output connector: barrel (center +)
 OD: ??  ID: ??  LEN: ??