See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Belkin F5D8230-4 v3

From WikiDevi
Jump to: navigation, search

Belkin F5D8230-4 v3000

Manuf/OEM/ODM Gemtek WRTO-127G

(Est.) release date: May 2006
Country of manuf.: Taiwan

Type: wireless router

FCC ID: SA3-AGN0901AP0100, SA3-AGN1223AR0300
Industry Canada ID: 5215A-0901AP01

Power: 12 VDC, 1 A
Connector type: barrel
Conn. measurements: 5 mm (OD), 2 mm (ID), 10 mm (LEN)

CPU1: Realtek RTL8651B
FLA1: 4 MiB
4,194,304 B
32,768 Kib
4,096 KiB
32 Mib
0.00391 GiB
(Macronix MX29LV320CBTC-90G)
RAM1: 16 MiB
16,777,216 B
131,072 Kib
16,384 KiB
128 Mib
0.0156 GiB
(EtronTech EM639165TS-6G)

Expansion IFs: Mini PCI
Mini PCI slots: 1

WI1 module: Airgo AGN1223AR-03
WI1 module IF: Mini PCI (long)
WI1 chip1: Airgo AGN103BB
WI1 chip2: Airgo AGN100RF
WI1 chip3: Airgo AGN100RF
WI1 802dot11 protocols: bg
WI1 MIMO config: 2x3:2
WI1 antenna connector: U.FL

ETH chip1: Realtek RTL8651B
Switch: Realtek RTL8651B
LAN speed: 10/100
LAN ports: 4
WAN speed: 10/100
WAN ports: 1


Default SSID: Belkin_Pre-N_XXXXXX (2 addl. devices)
Default IP address:
the IP is used by 274 additional devices
of which 97 are Belkin devices

802dot11 OUI: 00:11:50 (20 E, 39 W, 2005)
Ethernet OUI: 00:11:50 (20 E, 39 W, 2005)

Belkin F5D8230-4 v1SA3-AGN0901AP0100
Belkin F5D8230-4 v2SA3-AGN0901AP0100
Belkin F5D9230-4 v1SA3-AGN0901AP0100
Airgo AGN1223AR-03SA3-AGN1223AR0300
Belkin F5D8230-4 v1SA3-AGN0901AP0100
Belkin F5D8230-4 v2SA3-AGN0901AP0100
Belkin F5D8630-4K7SF5D8630-4
Buffalo WZR-G108FDI-09101462-0
Linksys WMP54GXQ87-WMP54GX
Linksys WRT54GX v1Q87-WRT54GX
Linksys WRT54GX v2Q87-WRT54GX
Netgear WGM124SA3-AGN1223AR0300
Planex BRC-W108GSA3-AGN1223AR0300
For a list of all currently documented Airgo chipsets with specifications, see Airgo.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Regarding third party firmware support, Realtek SoC support in OpenWrt
+ (success) RTL8196C port status. on the OpenWrt Forum
and the Realtek thread on the DD-WRT Forum may be of interest.

OEM Gemtek WRTO-127G (WRTO-127G_V03)

"190-D03-6900R RoHS" is silkscreened on the board.

The device has been tagged with the AGN100 wireless module FCC ID.. but the only FCC ID printed on the unit is SA3-AGN0901AP0100. SA3-AGN0901AP0100 defines the board used in the Belkin F5D8230-4 v1 which is not used in the v3.. so the FCC ID printed on the label is incorrect.

The RF shields are attached to the main board with a combination of blue clips and adhesive tape. The Airgo wireless module is soldered onto the Mini PCI retaining clips.

The default SSID is Belkin_Pre-N_XXXXXX where XXXXXX appears to be the last three octets of the wireless interface MAC address (lower case letters).