See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Belkin F5D7234-4 v3

From WikiDevi
Jump to: navigation, search

Belkin F5D7234-4 v3

Manuf/OEM/ODM Arcadyan WG4005G

FCC approval date: 07 October 2008
Country of manuf.: China

Type: wireless router

FCC ID: K7S-F5D7234V3
Industry Canada ID: 3623A-F5D7234V3

Power: 9 VDC, 1 A
Connector type: barrel

CPU1: Atheros AR2317
FLA1: 2 MiB
2,097,152 B
16,384 Kib
2,048 KiB
16 Mib
0.00195 GiB
(Eon EN25P16-75HCP)
RAM1: 8 MiB
8,388,608 B
65,536 Kib
8,192 KiB
64 Mib
0.00781 GiB
(ISSI IC42S16400F-7TL)

Expansion IFs: none specified
JTAG: yes, internal, 14-pin header, J11
Serial: yes, internal, 4-pin header, J3

WI1 chip1: Atheros AR2317
WI1 802dot11 protocols: bg
WI1 antenna connector: none

ETH chip1: Atheros AR2317
Switch: Atheros AR8216
LAN speed: 10/100
LAN ports: 4
WAN speed: 10/100
WAN ports: 1

bg

Default SSID: Belkin_G_Wireless_ (1 addl. devices), Belkin_G_Wireless_XXXXXX (2 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 271 additional devices
of which 97 are Belkin devices

802dot11 OUI: 00:1C:DF (15 E, 30 W, 2007)
Ethernet OUI: 00:1C:DF (15 E, 30 W, 2007)

For a list of all currently documented Atheros chipsets with specifications, see Atheros.


G Wireless Router

Support page

"141400520023J REV: 01" is silkscreened on the board.

The same board part number is on the Belkin F5D7230-4 vA.

The FCC ID printed on the label is K7SF5D7234V3.

The FCC ID is actually K7S-F5D7234V3.

Arcadyan WG4005G 1-LF-AK

The default SSID is (maybe, unknown status fresh from the factory)

Belkin_G_Wireless_XXXXXX where XXXXXX is the last 3 octets
of the WLAN MAC address (w/ uppercase letters).

When reset via the reset button, the device will take the SSID

of Belkin_G_Wireless_ with no trailing characters.

Resetting by way of the web configuration interface resets

the SSID to the three octets included format.

Bundled power suppl(y/ies)[edit]

The included power supply is a DVE DSA-9R-12 AUS (9V, 1A).

DVE DSA-9R-12 AUS 090100 (more)
Input: 100-120 VAC, 0.3 A
 Input connector: NEMA 1-15P
  Manuf. in: China  Eff. level: 3
Output: 9 VDC, 1 A
 Output connector: barrel (center +)
 OD: ??  ID: ??  LEN: ??

Serial[edit]

Serial pin description on J3 (UART):

1 +3V3
2 Tx
3 Rx
4 GND

Parameters: 115200 8N1

Boot log[edit]

bootlog
ar531xPlus rev 0x00000090 boot loader startup...
Flash initialized
SDRAM initialized
Cache initialized

Copy program from 0xbfc00000 to 0x80520000, length 0x0000d284 bytes ... done
Jump to SDRAM 0x80520cb4 [0x10000008, 0x00000000, 0x00000000]
Clear BSS section ... done
Stack: 0x8053f0b0
Heap: 0x8053f0c0

=========================================================================
 Wireless Gateway WG4005G 1-LF-AK NEW Loader 0.01 build Aug 14 2008 11:30:37
                  Arcadyan Technology Corporation
=========================================================================

Flash Found. It is 2MB Flash....
Copying boot params.....DONE
cpuFreq=240000000 sysFreq=60000000 cntFreq=120000000

Press any key to enter command mode ...
Checking Valid Image in Flash... Passed.
failed(4)

Try to find image for running...
Valid Code found in the Flash
done
Uncompressed size = 2560480
I am going to run the Code image from 80001000

firmware startup...
Stack: 0x807be700
Heap: 0x807be710
[GPIO FLOW] SetGpio() Begin ..
/home/titan_liu/Project/AP65_Linux/Broadband_SuperTask/ttf2004_GW61_Vista/
ttf2007_GW61_Vista/source/firmware/hardware/ar5312/ar531xbsp.c:bsp_gpio_init is called
[GPIO FLOW] SetGpio() End.
##### _ftext      = 0x80001000
##### _fdata      = 0x80249C70
##### __bss_start = 0x802721E0
##### end         = 0x807AE704
##### stack size  = 0x10000
##### Backup Data from 0x80249C70 to 0x807BE704, size = 165232 bytes

install_exception
Installing TLB Refill exception handler from 80008D00 to 80000000, size=192
Installing General exception handler from 80008DC0 to 80000180, size=16
Installing Interrupt exception handler from 80008DD0 to 80000200, size=160
misc_int_init
mips_int_enable : 0x00000400
Connect the AHB interrupt
sysBoardDataInit
Init the GPIOs !!!
Enable arbitration for SOC devices !!!
cpuFreq=184000000 sysFreq=40000000 cntFreq=92000000
should call WLanReset..
AR531X_TIMER=00061A6C
AR531X_RELOAD=00061A80
time1 0003a92f, time2 0003a923
AR531X_IMR=00000028
mips_cp0_status=10000401
mips_cp0_cause=00800000
Runtime code version: 3.00.03
System startup...
[INIT] Memory COLOR 0, 800000 bytes ..
[INIT] Memory COLOR 1, 500000 bytes ..
[INIT] Memory COLOR 2, 351200 bytes ..

Flash Found. It is 2MB Flash....
Set flash memory layout to ar531xmac_set_macaddr : next = 32Boot Parameters found !!!
Bootcode version: 0.01
Serial number: BE702136932
Hardware version: 01
sizeof(struct III_Config_t) is 77016
!![E-CFG-VER] Configuration data version mismatch!!
!![E-CFG-VER] Adapting factory defaults!!
!![E-CFG-VER] Reconfiguration required!!
VersionPostfix = 3
!!No configuration file present!!
>>> etcpip_init_config() copy over gSKUID=19, ChannelBound=13, CountryCode=8210
!!! Invalid wireless channel range 0 ~ 0
!!! Use default value 1 ~ 13
default route: 0.0.0.0
BufferInit:
BUF_HDR_SZ=48 BUF_ALIGN_SZ=4 BUFFER_OFFSET=112
BUF_BUFSZ0=272 BUF_BUFSZ1=1776
NUM_OF_B0=0 NUM_OF_B1=600
BUF_POOL0_SZ=0 BUF_POOL1_SZ=1094400
sizeof(BUFFER0)=320,sizeof(BUFFER1)=1824
*BUF0=0x805c5c70 *BUF1=0x804ba960
Altgn *BUF0=0x805c5c70 *BUF1=0x804ba960
End at BUF0:0x805c5c70, BUF1:0x805c5c60

BUF0[0]=0x805c5c70 BUF1[0]=0x804ba960

buffer0 pointer init OK!
buffer1 pointer init OK!
gConfig.Interface[0].IP_Addr = 127.0.0.1
gConfig.Interface[0].Subnet_Mask = 255.255.255.255
time = 08/01/2003, 00:00:00
Interface 0 ip = 127.0.0.1

gConfig.Interface[1].IP_Addr = 192.168.2.1
gConfig.Interface[1].Subnet_Mask = 255.255.255.0
ar531xmac_init: ifno=1, initstr=UNIT=0 VLAN=1
/home/titan_liu/Project/AP65_Linux/Broadband_SuperTask/ttf2004_GW61_Vista/
ttf2007_GW61_Vista/source/firmware/hardware/ar5312/ar531xbsp.c:sysEnetInit is called
ae531xEndLoad: loading device ...
ae531xEndLoad: unit=0, pDmaBuf=0xa03042f4, dmaBufSize=5136, txDescCount=128, rxDescCount=128, clCount=256
ae531xEndLoad: System param: mac=b0500000, dma=b0501000, ivec=4, ilev=1000
ae531xEndLoad: Flash ea = xx:xx:xx:xx:xx:xx
ae0 qt = 1, buf begin = 80000000, buf end = 80000000
ae0 qt = 1, drsc begin = a0304300, desc end = a0304cec
Tx Queue b=0xa0304300, e=0xa0304cec, c=0xa0304300, s@c=0x       0
ae0 qt = 2, buf begin = 804ba9d2, buf end = 804f32b2
ae0 qt = 2, drsc begin = a0304d00, desc end = a03056ec
Rx Queue b=0xa0304d00, e=0xa03056ec, c=0xa0304d00, s@c=0x80000000
ae531xMemInit: Memory setup complete.
enter athr_VLANInit
ae0 Phy Setup Failed
Please check the ethernet cable on port 0!
eth0: duplex 0, link 0
ae_SetMacFromPhy: enet0 as full duplex, 10Mbps
ae0: setting TXDP=0xa0304300 RXDP=0xa0304d00
ae0 Verify MAC address 96752200 00001FFE
  sb = xx xx xx xx xx xx
ae531xRxFilterConfig: MacControl = 1014000C
ae531xEndLoad: Done loading, pDrvCtrl=803040EC txQ=80304118 rxQ=8030412C
ae_unitLinkGained :
ae_SetMacFromPhy: enet0 as full duplex, 10Mbps
call ae531xStart
ae531xStart: Interrupt connected 0x0 0x4 0x801829B4 0x803040EC.
ae531xDmaIntEnable 0001a1e2
ae531xStart: complete. im = 0001A1E2, is = 00660004.
mips_int_enable : 0x00001400
Wake up DHCP client
ar531xmac_init: enet0 set to VLAN mode
ar531xmac_init: enet0 interface 1 registered to VLAN 1

  DmaStatus  = 0x  660004
  DmaBusMode = 0x    2084
  DmaRxBase  = 0x  304d00
  DmaTxBase  = 0x  304300
  DmaControl = 0x  202002
  DmaIntr    = 0x   1a1e2
  MacControl = 0x1014000c
  MacAddrHi  = 0x    xxxx
  MacAddrLo  = 0xxxxxxxxx
  MacVlan1   = 0x    xxxx
  MacVlan2   = 0x       x

Rx Queue b=0xa0304d00, e=0xa03056ec, c=0xa0304d00, s@c=0x80000000
Current Rx buffer = 0x  4ba9d2
Tx Queue b=0xa0304300, e=0xa0304cec, c=0xa0304300, s@c=0x 0
Current Tx buffer = 0x       0
time = 08/01/2003, 00:00:00
ae531xRxFilterConfig: MacControl = 1014000C
Interface 1 ip = 192.168.2.1

ae531xRxFilterConfig: MacControl = 1014000C
gConfig.Interface[2].IP_Addr = 0.0.0.0
gConfig.Interface[2].Subnet_Mask = 0.0.0.0
ar531xmac_init: ifno=2, initstr=UNIT=0 VLAN=2
ar531xmac_init: driver already loaded, number of instances is 2
ar531xmac_init: enet0 set to VLAN mode
ar531xmac_init: enet0 interface 2 registered to VLAN 2

  DmaStatus  = 0x  660004
  DmaBusMode = 0x    2084
  DmaRxBase  = 0x  304d00
  DmaTxBase  = 0x  304300
  DmaControl = 0x  202002
  DmaIntr    = 0x   1a1e2
  MacControl = 0x1014000c
  MacAddrHi  = 0x    xxxx
  MacAddrLo  = 0xxxxxxxxx
  MacVlan1   = 0x    xxxx
  MacVlan2   = 0x       x

Rx Queue b=0xa0304d00, e=0xa03056ec, c=0xa0304d00, s@c=0x80000000
Current Rx buffer = 0x  4ba9d2
Tx Queue b=0xa0304300, e=0xa0304cec, c=0xa0304300, s@c=0x       0
Current Tx buffer = 0x       0
time = 08/01/2003, 00:00:00
iput_IpLinkUp(ifno=2)> ifp->add_default_route:1
Re-Init NAT data structure
Init NAT data structure
Interface 2 ip = 0.0.0.0

gConfig.Interface[3].IP_Addr = 0.0.0.0
gConfig.Interface[3].Subnet_Mask = 255.255.255.0
[HWLAN] ifno=3 irno=7 port=0x00000000
[HWLAN] pRadio->abolt = 00000000
[HWLAN] pRadio->abolt = 00000000
[HWLAN] gSetting.BasicRate=f
[HWLAN] apCfgDefaultSet : prepare to set WDS..
apInit: Initialize Access Point.
[HWLAN] ar5hwcCreatePhy : ifno:3 pdevInfo=8037d3a8, devno=1
[HWLAN] devno 1 pdevInfo 8037d3a8
[HWLAN] Base address = b0000000, irq 3
Attach AR5212 0x13 0x8037d3a8
[HWLAN] DOMAIN 00008210
[HWLAN] MAC Address=xx-xx-xx=xx-xx-xx
[HWLAN] wlan1 revisions: mac 11.0 phy 4.8 analog 8.6 eeprom 5.3
[HWLAN] phwChannel 2437, channelFlags 00005400
[HWLAN] size of ATHEROS_DESC hardware part 32
[HWLAN] CACHE_LINE_SIZE 16, AR_DESC_SIZE 128
[HWLAN] AR_HEADER_SIZE 96, AR_BUF_SIZE 1696numDescriptors = 704
<<< Try to NonCache 223264
[HWLAN] wlan1: pDmaBuf=A0273DA0
[HWLAN] pMemBuf a0273da0 pdevInfo->pDmaBuf a0273da0
[HWLAN] ar5hwcQueueCreate: semaphore id 802ed528
[HWLAN] ar5hwcQueueCreate: semaphore id 802ed53c
[HWLAN] ar5hwcQueueCreate: semaphore id 802ed550
[HWLAN] ar5hwcQueueCreate: semaphore id 802ed564
[HWLAN] pMemBuf a028fda0, pdevInfo->pDmaBuf + pdevInfo->dmaBufSize a02aa5c0
[HWLAN] muxDevLoad is called for vportNum 10000, loadfn 800e151c, vportStr 16: 0: 1
[HWLAN] ioctl CMD=0xb
mips_int_connect: ivec 3 ar5hwcInt 800c5b94 pdevInfo 8037d3a8
mips_int_enable : 0x00001C00
[HWLAN] bridgePortAdd : vp, 10000
[HWLAN] bridgePortAdd (base BSS) succeeded for vp1
wlan1 added STA: 00:22:75:96:fe:1f (2560)
[HWLAN] ifno=3 after call apInit() : .... bg 1 , a 0 ....
time = 08/01/2003, 00:00:00
[HWLAN] hwlan_ioctl() ..
Interface 3 ip = 192.168.2.1

[HWLAN] hwlan_ioctl() ..
ruleCheck()> Group: 0,  Error: Useless rule index will be truncated
ruleCheck()> Group: 1,  Error: Useless rule index will be truncated
ruleCheck()> Group: 2,  Error: Useless rule index will be truncated
ruleCheck()> Group: 3,  Error: Useless rule index will be truncated
CBAC rule format check succeed !!
reqCBACBuf()> init match pool, Have: 50
Memory Address: 0x8079821c ~ 0x807987b0
reqCBACBuf()> init timeGap pool, Have: 2000
Memory Address: 0x807987b0 ~ 0x807a2404
reqCBACBuf()> init sameHost pool, Have: 200
Memory Address: 0x807a2404 ~ 0x807a3d24
[setClsfyEnable] clsfy_func=0
CBAC rule pool initialized !!
Init NAT data structure
No default route, no need to reinit the NAT data structure
RUNTASK id=2 if_task if0...
RUNTASK id=3 if_task if1...
RUNTASK id=4 if_task if2...
RUNTASK id=5 if_task if3...
RUNTASK id=6 timer_task...
RUNTASK id=7 conn_mgr...
RUNTASK id=8 main_8021x...
RUNTASK id=9 main_lltd...
RUNTASK id=10 period_task...
RUNTASK id=11, dhcp_daemon task success...
RUNTASK id=12,  dhcp_clt task success...
RUNTASK id=13 pptp_callmgr...
httpd: listen at 192.168.2.1:80
HTTPD TIMER_RESOURCE:5, FS_RESOURCE:6
RUNTASK httpd...
RUNTASK id=16 dnsproxy...
RUNTASK id=17 dhcpd_mgmt_task...
UPnP is enabled
UPNP Device initialize success! slot=18

>>> belkin_wan_cfg task runs successfully, task_id = 19
RUNTASK id=20 wscmain...
RUNTASK id=21 wsc_Send_eap_packet...
RUNTASK id=22 wsc_Send_UPNP_packet...
RUNTASK id=23 WSC_WaitUserAction_Task...
Starting Multitask...
load_lang_table to : English.cpz
get_language /www/doc/English.cpz, size=76081, >>>>>>>>
RUNTASK id=24 hwlan_light_isr...
RUNTASK id=25 led_task...
MTstart2() begin  ...
init psock cnt=12
turn on hwlan light
turn off hwlan security light
Atheros_NetTask running ...
[HWLAN] Ready
*********************************************
Wi-Fi Simple Config Application - Intel Corp.
Version: Build 1.02, No@#*@#*@#*EAP-WSC: Entered eap_wsc_init *#@*#@*#@
Entered udp_read
wsc_Send_eap_packet:udpFdupnp_wcn:15;;udpFdupnp:1WSC_WaitUserAction:wait user action:2
vuser action:2
*********************************************
Initializing stack...
---------in wsc init----------
7
----------sizeof(uint32)=4
----------sizeof(uint-long)=4
----------sizeof(uint32)=2
[20]pthread_cond_init: 0
[20]pthread_mutex_init: resource No. 26
[20]pthread_mutex_init: resource No. 27
[PORTABLITY]:WscCreateThread-------------WscCmd:ActualCBThreadProc: Started
-------

======================
0x00000000,Function=0x800AE5E8  PC=0x800AE628
0x00000001,Function=0x801BB4A4  PC=0x801BB534
0x00000002,Function=0x8002C1E4  PC=0x8002C2E8
0x00000003,Function=0x8upnp_Init: flag=0
SSDP Initialization completed..0leted...
0x00000004,Function=0x80003020  PC=0x80003018
0x00000005,Function=0x00000000  PC=0xFFFFFFF8

==========.PC=0xFFFFFFF8
GenaInit : event_hook is NULL!!
=vent_hook is NULL!!
[20]pthread_cond_init: 1
[20]pthread_mutex_init: resource No. 28
[20]pthread_mutex_init: resource No. 29
[PORTABLIWscCmd:ActualUIThreadProc: Started.
ActualUIThreadProc: wait q
TreadProc: wait q

======================
0x00000000,Function=0x800AE5E8  PC=0x800AE628
0x00000001,Function=0x801BB4A4  PC=0x801BB534
0x00000002,Function=0x8002C1E4  PC=0x8002C3B8
0x00000003,Function=0x8002C060  PC=0x8002C0E0
0x00000004,Function=0x80003020  PC=0x80003018
0x00000005,Function=0x00000000  PC=0xFFFFFFF8

======================
MasterControl constructor
WscCmd::MC instantiated ok
[20]pthread_cond_init: 2
[20]pthread_mutex_init: resource No. 30
[20]pthread_mutex_init: resource No. 31
[PORTABLITY]:WscCreateThread--------------------

======================
0x00000000,Function=0x800AE5E8  PC=0x800AE628
0x00000001,Function=0x801BB4A4  PC=0x801BB534
0x00000002,Function=0x801BFC44  PC=0x801BFD38
0x00000003,Function=0x8002C1E4  PC=0x8002C440
0x00000004,Function=0x8002C060  PC=0x8002C0E0
0x00000005,Function=0x80003020  PC=0x80003018
0x00000006,Function=0x00000000  PC=0xFFFFFFF8

======================
[20]pthread_mutex_init: resource No. 32
[PORTABLITY]:pthread_mutex_init--------------------
 CTransport Construction
[20]pthread_cond_init: 3
[20]pthread_mutex_init: resource No. 33
[20]pthread_mutex_init: resource No. 34
[PORTABLITY]:WscCreateThread--------------------

======================
0x00000000,Function=0x800AE5E8  PC=0In CTransport::ActualCBThreadProc
ActualCBThreadProc: Calling Dequeue
x800AE628
0x00000001,Function=0x801BB4A4  PC=0x801BB534
0x00000002,Function=0x801BEA9C  PC=0x801BEB44
0x00000003,Function=0x801BFC44  PC=0x801BFEA0
0x00000004,Function=0x8002C1E4  PC=0x8002C440
0x00000005,Function=0x8002C060  PC=0x8002C0E0
0x00000006,Function=0x80003020  PC=0x80003018
0x00000007,Function=0x00000000  PC=0xFFFFFFF8

======================
MC::Init: Init complete ok
WscCmd::MC intialized ok
WscCmd::Init ok, starting stack...
Info::ReadConfigFile: Called
Info::ReadConfigFile:▒$rp
Info::ReadConfigFile:File open ok
******************uuid_p:0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx*****
mp_deviceInfo->uuid[i]:
x-x-x-x-x-x-x-x-xx-x-x-xx-xx-xx-xx-xx-
mp_deviceInfo->macAddr:xx:xx:xx:xx:xx:xx
gSetting.dot1x.if_entry[0].enableWEP:0
authTypeFlags is 1 ,encrTypeFlags is 1 ,m_nwKey is , key len is 0
 ssid is Belkin_G_Wireless_96FE1F
S, 14f
E, 1c2
RegistrarSM constructor
[20]pthread_cond_init: 4
[20]pthread_mutex_init: resource No. 35
[20]pthread_mutex_init: resource No. 36
[PORTABLITY]:WscCreateThread--------------------

======================
0x00000000,Function=0x800AE5E8  PC=0x800AE628
0x00000001,Function=0x801BB4A4  PC=0x801BB534
0x00000002,Function=0x800093CC  PC=0x800094B8
0x00000003,Function=0x801D0ED4  PC=0x801D0EE4
0x00000004,Function=0x801C2DBC  PC=0x801C2F64
0x00000005,Function=0x801C02E4  PC=0x801C0448
0x00000006,Function=0x8002C060  PC=0x8002C110
0x00000007,Function=0x80003020  PC=0x80003018
0x00000008,Function=0x00000000  PC=0xFFFFFFF8

======================
[20]pthread_mutex_init: resource No. 37
[PORTABLITY]:pthread_mutex_init--------------------
 RegistrarSM constructor
[20]pthread_cond_init: 5
[20]pthread_mutex_init: resource No. 38
[20]pthread_mutex_init: resource No. 39
[PORTABLITY]:WscCreateThread--------------------

======================
0x00000000,Function=0x800AE5E8  PC=0x800AE628
0x00000001,Function=0x801BB4A4  PC=0x801BB534
0x00000002,Function=0x800093CC  PC=0x800094B8
0x00000003,Function=0x801C2DBC  PC=0x801C2FFC
0x00000004,Function=0x801C02E4  PC=0x801C0448
0x00000005,Function=0x8002C060  PC=0x8002C110
0x00000006,Function=0x80003020  PC=0x80003018
0x00000007,Function=0x00000000  PC=0xFFFFFFF8

======================
c_devPwd:org:12345670
**************mcp_devPwd:12345670;;
in startMonitor....
CInbEap Construction
Sizeof(WSC_NOTIFY_DATA) = -2143240344
---test--sizeof(WSC_NOTIFY_DATA) = 36
[20]pthread_cond_init: 6
[PORTABLITY]:WscCreateEvent--------------------
 Entered udp_open
Socket open successful, sd: -2143240360
Entered udp_open
Socket open successful, sd: -2143240360
Entered udp_bind
Binding successful for socket [-2143240376]
[PORTABLITY]:WscCreateThread--------------------

=============In CInbEap::StaticRecvThread
CInbEap::ActualRecvThread Started
Entered udp_read
=d
0x00000000,Function=0x800AE5E8  PC=0x800AE628
0x00000001,Function=0x801BB4A4  PC=0x801BB534
0x00000002,Function=0x801CF460  PC=0x801CF498
0x00000003,Function=0x801BEBAC  PC=0x801BEDB8
0x00000004,Function=0x801C2DBC  PC=0x801C30D0
0x00000005,Function=0x801C02E4  PC=0x801C0448
0x00000006,Function=0x8002C060  PC=0x8002C110
0x00000007,Function=0x80003020  PC=0x80003018
0x00000008,Function=0x00000000  PC=0xFFFFFFF8

======================
in startMonitor....
CInbUPnPDev Construction
Entered udp_open
Socket open successful, sd: -2143240360
Entered udp_open
Socket open successful, sd: -2143240360
Entered udp_bind
Binding successful for socket [-2143240376]
CInbUPnPDev StartMonitor
[PORTABLITY]:WscCreateThread-In CInbUPnPDev::StaticUPnPThread
end UPnPCreateMicroStack
Entered udp_read
-ad

======================
0x00000000,Function=0x800AE5E8  PC=0x800AE628
0x00000001,Function=0x801BB4A4  PC=0x801BB534
0x00000002,Function=0x801D0390  PC=0x801D03DC
0x00000003,Function=0x801BEBAC  PC=0x801BEDB8
0x00000004,Function=0x801C2DBC  PC=0x801C30DC
0x00000005,Function=0x801C02E4  PC=0x801C0448
0x00000006,Function=0x8002C060  PC=0x8002C110
0x00000007,Function=0x80003020  PC=0x80003018
0x00000008,Function=0x00000000  PC=0xFFFFFFF8

======================
MC::SwitchModeOn: Exit
MC::StartStack: Informing app of mode
-WscCmd::CallbackProc Enqueue done
MC::SwitchModeOn: Done callback
exit wscma@@[26]pthread_mutex_unlock: the res is free 26-- -2145500476
iad_mutex_unlock: the res is free 26-- -2145500476
WscCmd:ActualCBThreadProc: CB_MAIN_PUSH_MODE recd

******* MODE: Access Point *******
-@@[18]pthread_mutex_unlock: the res is free 28-- -2144279868
*******p_header->eType:1

Options:
0. Quit
1. Get configured
2. Get configured via push-button
3. Get configured using IEs
Enter selection: ***gp_mc->mp_info->GetSwitchMode():1
mp_info->GetSwitchMode():1:e_currMode:1,,e_targetMode:3
mp_deviceInfo->authTypeFlags:1
mp_deviceInfo->encrTypeFlags:1
********cp_devPwd:12345670*****
mp_deviceInfo->authTypeFlags:1
mp_deviceInfo->encrTypeFlags:1
MC::SetBeaconIE: call to trans->SetBeaconIE() ok
MC::SetProbeRespIE: call to trans->SetProbeRespIE() ok
Waiting for Registrar to connect...
WscCmd::unconfig initiated
ActualUIThreadProc: wait q

Images[edit]