WikiDevi will be going offline 2019-10-31. For historical dumps of the database, see 'WikiDevi' @ the Internet Archive (MW XML, Files, Images).
Final dumps will be made available after the site goes offline.
There is no chance the data will not live on, in some form - even if it isn't 'WikiDevi' anymore. For example, see TechInfoDepot.

Banana Pi BPI Pro

From WikiDevi
(Redirected from Banana Pro)
Jump to: navigation, search

Banana Pi BPI Pro

Manuf/OEM/ODM LeMaker

(Est.) release date: August 2014
Country of manuf.: China

Amazon image

ASIN
B01GA447JE (Flag of the United States.svg, On Amazon, On CCC)
multiple revisions of this device, use caution

Type: single-board computer

Power: 5 VDC, 2 A
Connector type: USB Female Micro-B

CPU1: Allwinner A20 (1 GHz, 2 cores)
FLA1: 0 MiB
0 B
0 Kib
0 KiB
0 Mib
0 GiB
(Brand? Model?)
RAM1: 1 GiB
1,024 MiB
1,073,741,824 B
8,388,608 Kib
1,048,576 KiB
8,192 Mib
(SK hynix H5TQ4G63AFR-PBC × 2)

Expansion IFs: USB 2.0, SATA, MicroSD Card slot
USB ports: 2
SATA ports: 1
Serial: yes, 3-pin header, 3.3V TTL, (115200,8,N,1)

WI1 module: AMPAK AP6181
WI1 module IF: SDIO
WI1 chip1: Broadcom BCM43362
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: U.FL

ETH chip1: Realtek RTL8211E
LAN speed: 1G
LAN ports: 1

bgn

Third party firmware supported: Debian, Arch Linux (Arm), Android

Flags: IrDA, HDMI, A/V out (3.5mm), easily accessible GPIO

802dot11 OUI: none specified

 CPU1 brandWI1 chip1 brandWI1 chip2 brand
Banana Pi BPI M1Allwinner
Banana Pi BPI M2AllwinnerBroadcom
Banana Pi BPI M2 BerryAllwinnerBroadcom
Banana Pi BPI M2 UltraAllwinnerBroadcom
Banana Pi BPI M2 ZeroAllwinnerBroadcom
Banana Pi BPI M2+AllwinnerBroadcom
Banana Pi BPI P2 ZeroAllwinnerBroadcom
Banana Pi BPI ProAllwinnerBroadcom
Banana Pi BPI R1AllwinnerRealtek
Banana Pi BPI R2MediaTekMediaTek
Banana Pi BPI R64MediaTekMediaTek
Banana Pi BPI S64Actions Semi
For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.


Product page (LeMaker)
CPU: Broadcom BCM43362 ARM Cortex-M3 (WICED)
Wi-Fi: AMPAK AP6181 - 802.11bgn (150Mbps)
1x 10/100/1000 Ethernet RJ45 port

Serial[edit]

iw list dump
Bananian Linux 16.04 / Debian GNU/Linux 8.4 (jessie)
linux-image-3.4.111-bananian_16.04.01 (ap6210 op_mode=2)
linux-firmware-image_16.04.01 (fw_bcm40181a2.bin Apr 22 2013 14:50:00 
 version 5.90.195.89.6 FWID 01-b30a427d)

Wiphy phy0
	Band 1:
		Capabilities: 0x1020
			HT20
			Static SM Power Save
			RX HT20 SGI
			No RX STBC
			Max AMSDU length: 3839 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 16 usec (0x07)
		HT RX MCS rate indexes supported: 0-7
		HT TX MCS rate indexes are undefined
		Frequencies:
			* 2412 MHz [1] (20.0 dBm)
			* 2417 MHz [2] (20.0 dBm)
			* 2422 MHz [3] (20.0 dBm)
			* 2427 MHz [4] (20.0 dBm)
			* 2432 MHz [5] (20.0 dBm)
			* 2437 MHz [6] (20.0 dBm)
			* 2442 MHz [7] (20.0 dBm)
			* 2447 MHz [8] (20.0 dBm)
			* 2452 MHz [9] (20.0 dBm)
			* 2457 MHz [10] (20.0 dBm)
			* 2462 MHz [11] (20.0 dBm)
			* 2467 MHz [12] (20.0 dBm)
			* 2472 MHz [13] (20.0 dBm)
			* 2484 MHz [14] (20.0 dBm)
		Bitrates (non-HT):
			* 1.0 Mbps
			* 2.0 Mbps (short preamble supported)
			* 5.5 Mbps (short preamble supported)
			* 11.0 Mbps (short preamble supported)
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
	max # scan SSIDs: 10
	max scan IEs length: 2048 bytes
	Retry short limit: 7
	Retry long limit: 4
	Coverage class: 0 (up to 0m)
	Supported Ciphers:
		* WEP40 (00-0f-ac:1)
		* WEP104 (00-0f-ac:5)
		* TKIP (00-0f-ac:2)
		* CCMP (00-0f-ac:4)
		* CMAC (00-0f-ac:6)
	Available Antennas: TX 0 RX 0
	Supported interface modes:
		 * managed
		 * AP
		 * monitor
	software interface modes (can always be added):
	interface combinations are not supported
	Supported commands:
		 * new_interface
		 * set_interface
		 * new_key
		 * start_ap
		 * set_bss
		 * join_ibss
		 * set_pmksa
		 * del_pmksa
		 * flush_pmksa
		 * remain_on_channel
		 * frame
		 * frame_wait_cancel
		 * set_wiphy_netns
		 * set_channel
		 * connect
		 * disconnect
	Supported TX frame types:
		 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
	Supported RX frame types:
		 * IBSS: 0xd0
		 * managed: 0x40 0xd0
		 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * P2P-client: 0x40 0xd0
		 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0