See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Banana Pi BPI M2+

From WikiDevi
Jump to: navigation, search

Banana Pi BPI BPI-M2+ (v1.2)

Manuf/OEM/ODM SinoVoIP

(Est.) release date: 2016
Country of manuf.: China

Amazon image

ASIN
B071Y3S27S (Flag of the United States.svg, On Amazon, On CCC)
multiple revisions of this device, use caution

Type: single-board computer

Power: 5 VDC, 2 A
Connector type: barrel

CPU1: Allwinner H3 (1.0 GHz, 4 cores)
FLA1: 8 GiB
8,192 MiB
8,589,934,592 B
67,108,864 Kib
8,388,608 KiB
65,536 Mib
(Samsung eMMC)
RAM1: 1 GiB
1,024 MiB
1,073,741,824 B
8,388,608 Kib
1,048,576 KiB
8,192 Mib
(Samsung K4B4G16460-BCK0 × 2)

Expansion IFs: USB 2.0, HDMI, MicroSD Card slot
USB ports: 3
Serial: yes

WI1 module: AMPAK AP6212
WI1 module IF: SDIO (module)
WI1 chip1: Broadcom BCM43430
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: U.FL

ETH chip1: Realtek RTL8211E
LAN speed: 10/100/1000
LAN ports: 1

abgn

Stock bootloader: U-Boot

Stock FW OS: Bananian

Third party firmware supported: Android, Ubuntu, Debian, OpenWrt

Flags: Bluetooth 4.0, HDMI out, MIPI DSI, IrDA, GPIO

802dot11 OUI: none specified

 CPU1 brandWI1 chip1 brandWI1 chip2 brand
Banana Pi BPI M1Allwinner
Banana Pi BPI M2AllwinnerBroadcom
Banana Pi BPI M2 BerryAllwinnerBroadcom
Banana Pi BPI M2 UltraAllwinnerBroadcom
Banana Pi BPI M2 ZeroAllwinnerBroadcom
Banana Pi BPI M2+AllwinnerBroadcom
Banana Pi BPI P2 ZeroAllwinnerBroadcom
Banana Pi BPI ProAllwinnerBroadcom
Banana Pi BPI R1AllwinnerRealtek
Banana Pi BPI R2MediaTekMediaTek
Banana Pi BPI R64MediaTekMediaTek
Banana Pi BPI S64Actions Semi
For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.


Product page

Specifications[edit]

Banana Pi M2 Plus Board
  • CPU: Allwinner H3 Quad-core (ARM Cortex-A7) H.265/HEVC 4K
  • GPU: Mali-400 MP2 @600MHz, Supports OpenGL ES 2.0
  • Memory: 1GB DDR3 (shared with GPU)
  • Flash: 8GB eMMC flash onboard
  • Network: 1x 10/100/1000 Ethernet
  • WiFi & BT: AMPAK AP6212, BT 4.0, SDIO (option AP6181, AP6335)
  • Video Input: A CSI input connector
Camera: Supports 8-bit YUV422 CMOS sensor interface,
Supports CCIR656 protocol for NTSC and PAL,
Supports SM pixel camera sensor,
Supports video capture solution up to 1080p@30fps
  • Video Outputs: Supports HDMI output with HDCP, CEC, 3D function,
Integrated CVBS, Supports simultaneous output of HDMI and CVBS
  • Audio Outputs: HDMI
  • Power: 5V/2A DC input can, but USB OTG input don’t supply power
  • USB 2.0 ports: two USB 2.0 HOST, one USB 2.0 OTG
  • GPIO: 40x Pins Header, compatible with Raspberry Pi B+
  • LED: Power led & Status led
  • IR: IR input on board
  • OS: Android, Ubuntu, Debian, Raspberry Pi Image, OpenWRT

See also[edit]