See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken
This entry is representative of the Atheros CB32 reference design. Additional details are per an engineering sample unit.. which is pictured below.
lspci -nnv dump
06:00.0 Ethernet controller : Qualcomm Atheros AR5212/AR5213 Wireless Network Adapter [168c:0013] (rev 01) Subsystem: Qualcomm Atheros Device [168c:1031] Flags: bus master, medium devsel, latency 168, IRQ 19 Memory at f1d00000 (32-bit, non-prefetchable) [size=64K] Capabilities:  Power Management version 2 Kernel driver in use: ath5k
ath5k info dump
[99559.434230] ath: EEPROM regdomain: 0x0 [99559.434233] ath: EEPROM indicates default country code should be used [99559.434234] ath: doing EEPROM country->regdmn map search [99559.434235] ath: country maps to regdmn code: 0x3a [99559.434236] ath: Country alpha2 being used: US [99559.434237] ath: Regpair used: 0x3a [99559.434353] ieee80211 phy11: Selected rate control algorithm 'minstrel_ht' [99559.434848] ath5k: phy11: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41) [99559.434851] ath5k: phy11: RF5112B multiband radio found (0x36) [99559.434868] cfg80211: Calling CRDA for country: US [99559.532127] IPv6: ADDRCONF(NETDEV_UP): wlan153: link is not ready