See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Amped Wireless AP1200EX

From WikiDevi
Jump to: navigation, search

Amped Wireless AP1200EX

FCC approval date: 28 August 2018
Country of manuf.: Taiwan
Series: AC1200

Type: access point

FCC ID: ZTT-AP1200EX
Industry Canada ID: 10233A-AP1200EX

Power: ? VDC, ? A
Power over Ethernet (PoE) tag: non-standard (otherwise unspecified)

CPU1: Brand? Model?
FLA1: ? MiB (Brand? Model?)
RAM1: ? MiB (Brand? Model?)

Expansion IFs: none specified

WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 2x2:2
WI2 antenna connector: none

ETH chip1: Brand? Model?
LAN speed: 10/100/1000
LAN ports: 2

abgn+ac

Flags: hg directional

Default SSID: Amped_AP1200EX_2.4, Amped_AP1200EX_5.0
Default IP address: 192.168.80.240
the IP 192.168.80.240 is used by 2 additional devices
of which 2 are Amped Wireless devices

802dot11 OUI: none specified

 FCC ID
Amped Wireless RE1200EXZTT-RE1200EX
ZTT-AP1200EX

867 Mbps - 2SS 5GHz 802.11ac (80MHz chan.),
300 Mbps - 2SS 2.4GHz 802.11n clients (40MHz chan.) = 1200 Mbps class

High Power AC1200 Pro Wi-Fi Access Point

This device was under short-term confidentiality, but that expired 02/21/2019.

The supported transmission rates listed in the Test Report NII document at the FCC (1300 Mbps 802.11ac, 450 Mbps 802.11n) suggest that this device supports three spatial streams on the 5GHz radio despite being labeled as AC1200 which typically means two spatial streams. The same document lists two antennas which likely means that this is actually a two-stream device and the listed transmission rates are wrong.