WikiDevi will be going offline 2019-10-31. For historical dumps of the database, see 'WikiDevi' @ the Internet Archive (MW XML, Files, Images).
Final dumps will be made available after the site goes offline.
There is no chance the data will not live on, in some form - even if it isn't 'WikiDevi' anymore. For example, see TechInfoDepot.

Alpha Networks WMC-ND02

From WikiDevi
Jump to: navigation, search

Alpha Networks WMC-ND02

FCC approval date: 27 April 2012

Interface: Mini PCI

Form factor tags: Mini Card

ID: 168c:0030 (14 addl. devices) SS: 168c:3112
Windows: PCI\VEN_168C&DEV_0030&SUBSYS_3112168C

FCC ID: RRK-G2F

WI1 chip1: Atheros AR9380

Additional chips
2.4/5GHz Front End Module;Skyworks;SE2595L;;3;

Windows driver
see ath-drivers.eu
(Win 7/8/10)

Antenna connector: U.FL

an, 3x3:3

OUI: 00:03:7F (2 E, 9 W, 2003)

For a list of all currently documented Atheros chipsets with specifications, see Atheros.



802.11a/g/n PCIE Mini Card

From a card pulled out of a Western Digital My Net N900 Central (2TB)...

  • "8WMCND02.1A1G" is silkscreened on the bottom of the card.
  • "802.11 a/g/n PCIE Mini card" and "REV-A1" is silkscreened on the card on the top (underneath the RF shielding).
  • The card is using 3x SiGe SE2595L FEMs.
  • The card is locked into operating in the 5G band only - as a wireless module in the N900 Central, it is the 5G module.
  • The PCI ID used by the card is 168c:0030 (168c:3112). This is the same ID used by the sister module, the Alpha Networks WMC-N02.
  • The OUI hard-coded into the card is 00:03:7F.

I don't know if this module was used in any other devices other than the N900 Central or marketed to other companies, but, if so, the details will probably differ.

Linux command-line-tool-derived info from the N900 Central Card[edit]

lspci -nnv
05:00.0 Network controller [0280]: Qualcomm Atheros AR93xx Wireless Network Adapter [168c:0030] (rev 01)
        Subsystem: Qualcomm Atheros AR93xx Wireless Network Adapter [168c:3112]
        Physical Slot: 1
        Flags: bus master, fast devsel, latency 0, IRQ 19
        Memory at f1d00000 (64-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at f1d20000 [disabled] [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: ath9k
        Kernel modules: ath9k
iw list
Wiphy phy1
        max # scan SSIDs: 4
        max scan IEs length: 2261 bytes
        max # sched scan SSIDs: 0
        max # match sets: 0
        max # scan plans: 1
        max scan plan interval: -1
        max scan plan iterations: 0
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports RSN-IBSS.
        Device supports AP-side u-APSD.
        Device supports T-DLS.
        Supported Ciphers:
                * WEP40 (00-0f-ac:1)
                * WEP104 (00-0f-ac:5)
                * TKIP (00-0f-ac:2)
                * CCMP-128 (00-0f-ac:4)
                * CCMP-256 (00-0f-ac:10)
                * GCMP-128 (00-0f-ac:8)
                * GCMP-256 (00-0f-ac:9)
                * CMAC (00-0f-ac:6)
                * CMAC-256 (00-0f-ac:13)
                * GMAC-128 (00-0f-ac:11)
                * GMAC-256 (00-0f-ac:12)
        Available Antennas: TX 0x7 RX 0x7
        Configured Antennas: TX 0x7 RX 0x7
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * AP/VLAN
                 * monitor
                 * mesh point
                 * P2P-client
                 * P2P-GO
                 * outside context of a BSS
        Band 2:
                Capabilities: 0x11ef
                        RX LDPC
                        HT20/HT40
                        SM Power Save disabled
                        RX HT20 SGI
                        RX HT40 SGI
                        TX STBC
                        RX STBC 1-stream
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 8 usec (0x06)
                HT TX/RX MCS rate indexes supported: 0-23
                Bitrates (non-HT):
                        * 6.0 Mbps
                        * 9.0 Mbps
                        * 12.0 Mbps
                        * 18.0 Mbps
                        * 24.0 Mbps
                        * 36.0 Mbps
                        * 48.0 Mbps
                        * 54.0 Mbps
                Frequencies:
                        * 5180 MHz [36] (23.0 dBm)
                        * 5200 MHz [40] (23.0 dBm)
                        * 5220 MHz [44] (23.0 dBm)
                        * 5240 MHz [48] (23.0 dBm)
                        * 5260 MHz [52] (23.0 dBm) (no IR, radar detection)
                        * 5280 MHz [56] (23.0 dBm) (no IR, radar detection)
                        * 5300 MHz [60] (23.0 dBm) (no IR, radar detection)
                        * 5320 MHz [64] (23.0 dBm) (no IR, radar detection)
                        * 5500 MHz [100] (23.0 dBm) (no IR, radar detection)
                        * 5520 MHz [104] (23.0 dBm) (no IR, radar detection)
                        * 5540 MHz [108] (23.0 dBm) (no IR, radar detection)
                        * 5560 MHz [112] (23.0 dBm) (no IR, radar detection)
                        * 5580 MHz [116] (23.0 dBm) (no IR, radar detection)
                        * 5600 MHz [120] (23.0 dBm) (no IR, radar detection)
                        * 5620 MHz [124] (23.0 dBm) (no IR, radar detection)
                        * 5640 MHz [128] (23.0 dBm) (no IR, radar detection)
                        * 5660 MHz [132] (23.0 dBm) (no IR, radar detection)
                        * 5680 MHz [136] (23.0 dBm) (no IR, radar detection)
                        * 5700 MHz [140] (23.0 dBm) (no IR, radar detection)
                        * 5745 MHz [149] (30.0 dBm)
                        * 5765 MHz [153] (30.0 dBm)
                        * 5785 MHz [157] (30.0 dBm)
                        * 5805 MHz [161] (30.0 dBm)
                        * 5825 MHz [165] (30.0 dBm)
        Supported commands:
                 * new_interface
                 * set_interface
                 * new_key
                 * start_ap
                 * new_station
                 * new_mpath
                 * set_mesh_config
                 * set_bss
                 * authenticate
                 * associate
                 * deauthenticate
                 * disassociate
                 * join_ibss
                 * join_mesh
                 * remain_on_channel
                 * set_tx_bitrate_mask
                 * frame
                 * frame_wait_cancel
                 * set_wiphy_netns
                 * set_channel
                 * set_wds_peer
                 * tdls_mgmt
                 * tdls_oper
                 * probe_client
                 * set_noack_map
                 * register_beacons
                 * start_p2p_device
                 * set_mcast_rate
                 * connect
                 * disconnect
                 * channel_switch
                 * set_qos_map
                 * set_multicast_to_unicast
        Supported TX frame types:
                 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
                 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
        Supported RX frame types:
                 * IBSS: 0x40 0xb0 0xc0 0xd0
                 * managed: 0x40 0xd0
                 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * mesh point: 0xb0 0xc0 0xd0
                 * P2P-client: 0x40 0xd0
                 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
                 * P2P-device: 0x40 0xd0
        software interface modes (can always be added):
                 * AP/VLAN
                 * monitor
        valid interface combinations:
                 * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1,
                   total <= 2048, #channels <= 1, STA/AP BI must match
        HT Capability overrides:
                 * MCS: ff ff ff ff ff ff ff ff ff ff
                 * maximum A-MSDU length
                 * supported channel width
                 * short GI for 40 MHz
                 * max A-MPDU length exponent
                 * min MPDU start spacing
        Device supports TX status socket option.
        Device supports HT-IBSS.
        Device supports SAE with AUTHENTICATE command
        Device supports low priority scan.
        Device supports scan flush.
        Device supports AP scan.
        Device supports per-vif TX power setting
        P2P GO supports CT window setting
        Driver supports full state transitions for AP/GO clients
        Driver supports a userspace MPM
        Device supports active monitor (which will ACK incoming frames)
        Driver/device bandwidth changes during BSS lifetime (AP/GO mode)
        Device supports configuring vdev MAC-addr on create.