Actiontec MI424WR rev I

From WikiDevi
Jump to: navigation, search

Actiontec MI424WR I

FCC approval date: 05 May 2011
Country of manuf.: China

Type: wireless router, FiOS modem

FCC ID: LNQMI424WRI

Power: 12 VDC, 1.8 A
Connector type: barrel

CPU1: Marvell 88F6560 (1.6 GHz)
FLA1: 128 MiB134,217,728 B
1,048,576 Kib
131,072 KiB
1,024 Mib
0.125 GiB
(Hynix H27U1G8F2BTR)
RAM1: 128 MiB134,217,728 B
1,048,576 Kib
131,072 KiB
1,024 Mib
0.125 GiB
(Nanya NT5CB64M16DP-CF)

Expansion IFs: USB 2.0
USB ports: 2

WI1 chip1: Atheros AR9287
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: RP-SMA

ETH chip1: Marvell 88F6560
ETH chip2: Marvell 88E1545
Switch: Marvell 88F6560
LAN speed: 10/100/1000
LAN ports: 4
WAN ports: 1

bgn

Flags: MoCA 1.1

Default SSID: XXXXX (9 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 768 additional devices
of which 4 are Actiontec devices

802dot11 OUI: 00:7F:28
Ethernet OUI: 00:7F:28

 CPU1 brandWI1 chip1 brandWI1 chip2 brand
Actiontec MI424WR rev AIntelRalinkRalink
Actiontec MI424WR rev CIntelAtheros
Actiontec MI424WR rev DIntelAtheros
Actiontec MI424WR rev ECaviumAtheros
Actiontec MI424WR rev FCaviumAtheros
Actiontec MI424WR rev GCaviumAtheros
Actiontec MI424WR rev HBroadcom
Actiontec MI424WR rev IMarvellAtheros
For a list of all currently documented Atheros chipsets with specifications, see Atheros.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.

This is a router used by Verizon for FiOS installations.

Single-core ARM based, ARM926EJ as recognized by the default Linux firmware

On the DD-WRT forums (internal shot and elaboration on specifications)

the device is presumably 88F6560 (AVANTA family) based

The device uses two Entropic Communications EN2510 for the coaxial (MoCA) connections.

The default SSID follows a pattern of 5 letters and numbers (example: 2P6G2).