See 'WikiDevi' @ the Internet Archive (MW XML, Files, Images)
upgraded MW to 1.30 - maybe things are slightly less broken

Actiontec MI424WR rev D

From WikiDevi
Jump to: navigation, search

Actiontec MI424WR D

FCC approval date: 24 August 2006
(Est.) release date: 20 August 2007
Country of manuf.: China

Type: wireless router, FiOS modem


Power: 5 VDC, 3 A
Connector type: barrel

CPU1: Intel XScale IXP420 (533 MHz)
FLA1: 8 MiB
8,388,608 B
65,536 Kib
8,192 KiB
64 Mib
0.00781 GiB
(Intel JS28F640J3D-75)
RAM1: 32 MiB
33,554,432 B
262,144 Kib
32,768 KiB
256 Mib
0.0313 GiB
(Hynix HY57V281620FTP-H × 2)

Expansion IFs: Mini PCI
Mini PCI slots: 1
JTAG: yes, 20-pin unpopulated
Serial: yes, 6-pin header, populated, (115200,8,N,1), J20

WI1 module: Actiontec 802MAG
WI1 module IF: Mini PCI
WI1 chip1: Atheros AR2413
WI1 802dot11 protocols: bg
WI1 antenna connector: RP-SMA

ETH chip1: Intel XScale IXP420
Switch: Micrel KSZ8995MA
LAN speed: 10/100
LAN ports: 4
WAN speed: 10/100
WAN ports: 1


Stock bootloader: RGLoader

Stock FW OS: Linux 2.4.21 Jungo OpenRG

Third party firmware supported: OpenWrt, DD-WRT • (List), LEDE Project • (List)

Flags: MoCA 1.0

Default SSID: XXXXX (9 addl. devices)
Default IP address:
the IP is used by 1139 additional devices
of which 7 are Actiontec devices
Default login user: admin
Default login password: unit's serial number
admin:units serial number credentials used by 3 additional devices
of which 1 are Actiontec devices

802dot11 OUI: 00:1F:90 (4 E, 4 W, 2008), 00:18:01 (2 E, 3 W, 2007)
Ethernet OUI: 00:1F:90 (4 E, 4 W, 2008), 00:18:01 (2 E, 3 W, 2007)

For a list of all currently documented Atheros chipsets with specifications, see Atheros.
For a list of all currently documented Intel chipsets with specifications, see Intel.

GPL Code download center
On the OpenWrt wiki, and a overview
On the DD-WRT forums (internal shots)
MI424WR on the DD-WRT wiki

Actiontec MI424WR - a cheap MoCA bridge for all! - AVS Forum

Actiontec MI424WR rev D on TechInfoDepot

The CPU is part PRIXP420ABD. There are no heatsinks installed on this unit.

The device uses two Entropic Communications EN2210 for the coaxial (MoCA) connections.

MoCA 1.0 certification, 08/20/2007 (presumed to be close [or closer than the FCC approval date for the wireless module, anyway] to the release date)

The default SSID follows a pattern of 5 letters and numbers (example: 34M42).

The power adapter included with the device is a Actiontec ADS6818-1505-WDB 0530 (5VDC, 3A, 15W).