Actiontec GT704WG

Actiontec GT704WG

FCC approval date: 15 March 2004
Country of manuf.: China

Type: wireless router, dsl modem

FCC ID: LNQGT704

Power: 12 VDC, 0.6 A
Connector type: Barrel plug
Measurements: 1 mm (ID), 3.5 mm (OD), 10 mm (LEN)

CPU1: Texas Instruments TNETD7300
FLA1: 4 MB (Macronix MX29LV320CBTC-70G)
RAM1: 32 MB (Hynix HY57V281620ET-H)

Expansion IF types: none specified

WI1 chip1: Texas Instruments TNETW1130
WI1 chip2: Texas Instruments RC2422B
WI1 802dot11 protocols: bg
WI1 antenna connector: RP-SMA

ETH chip1: Texas Instruments TNETD7300
Switch: Marvell 88E6060
LAN speed: 10/100
LAN ports: 4

bg

Flags: schematics, ADSL2+

Default SSID: XXXXX (8 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 626 additional devices
of which 4 are Actiontec devices
Default login user: admin
Default login password: password
admin:password credentials used by 221 additional devices
of which 1 are Actiontec devices

Wireless interface OUI: 00:0F:B3 (2 addl. devices)
Ethernet interface OUI: 00:0F:B3 (2 addl. devices)

	CPU1 brand	WI1 chip1 brand	WI1 chip2 brand
Actiontec GT704WG	Texas Instruments	Texas Instruments	Texas Instruments
Actiontec GT704WG Rev. B	Broadcom	Broadcom

54 Mbps Wireless DSL Gateway with 4-Port Router
Product page
User manual

On the OpenWrt wiki

The SSID follows a pattern of 5 letters and numbers (example: EJB67). Per the label, the WEP key appears to be last 5 octets of the unit MAC address (which may be the WLAN MAC minus 3 hex digits).

The included power supply is a Actiontec AD-1260 (12VDC, 0.6A). ID/OD/Len measurements are not exact.