Looking for a device with a certain chipset? Check out Special:BrowseData.
Looking for more information or pictures? Check out the FCC website with the listed FCC ID.
If you have something to add, feel free to make an edit or add to the relevant Talk page.
2Wire HomePortal 1000HW
2Wire HomePortal 1000HW
Availability: common
FCC approval date: 4 September 2003
Country of manuf.: Malaysia
Type: access point, dsl modem
FCC ID: PGR2WHPLHW
Power: 6 VDC, 2 A
Connector type: Barrel
CPU1: 2Wire Medusa (3000-000171-006, eC575563-1)
FLA1: 16 MB (M-System MD2811-D16-V3Q18)
RAM1: 32 MB (Unigen UGSV1286T-75 x 2)
Expansion IF types: none specified
WI1 chip1: Texas Instruments ACX100
WI1 chip2: Maxim MAX2820
WI1 802dot11 protocols: b
WI1 antenna connector: none
ETH chip1: 2Wire Medusa (3000-000171-006, eC575563-1)
ETH chip2: Kendin KS8721B
LAN speed: 10/100
LAN ports: 1
b
Flags: ADSL
Default SSID: 2WIREXXX (5 addl. devices)
Default IP address: 172.16.0.1
the IP 172.16.0.1 is used by 4 additional devices
of which 0 are 2Wire devices
"CHIPBOY-SLI" is silkscreened on the board.
The CPU (on the CPU Grave Yard) has a TriMedia core.
Device also has a Silicon Labs Si3101 and HW2000 on board.
The default SSID is 2WIRE followed by the last three digits of the serial number. The default WEP key is printed on the unit under the serial number.
The device has no reset button. Resettting the password appears to require 2Wire support to provide a temporary password..
[edit] Images
- board scans
board top
board bottom
